This document reports the results of the evaluation study commissioned in response to the Government Information Locator Service (GILS) Board's request for an assessment of GILS. The study began in September 1996, data collection ended in March 1997, and the final report was completed in June 1997. The goal of the study was to understand how: GILS serves various user groups, GILS improves public access to government information, agencies are progressing with their implementations, and GILS works as a tool for information resources management.

The test objectives are: (1) Make liquid helium and measure refrigerator capacity; (2) Measure liquid helium dewar heat leak, transfer line heat leak, and liquid nitrogen consumption rates; (3) Operate all cryogenic transfer lines; (4) Get some running time on all components; (5) Debug mechanical components, instrumentation, DMACs user interface, tune loops, and otherwise shake out any problems; (6) Get some operating time in to get familiar with system behavior; (7) Revise and/or improve operating procedures to actual practice; and (8) Identify areas for future improvement. D-Zero's stand alone helium refrigerator (STAR) liquified helium at a rate of 114 L/hr. This is consistent with other STAR installations. Refrigeration capacity was not measured due to lack of a calibrated heat load. Measured heat leaks were within design values. The helium dewar loss was measured at 2 to 4 watts or 9% per day, the solenoid and VLPC helium transfer lines had a heat leak of about 20 watts each. The liquid nitrogen consumption rates of the mobile purifier, STAR, and LN2 subcooler were measured at 20 gph, 20 to 64 gph, and 3 gph respectively. All cryogenic transfer lines including the solenoid and visible light photon counter (VLPC) transfer lines were …

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story. This story aired at 6:00 P.M.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, covering a news story about a Missionary Baptist Church which may be in danger of shutting down after the death of Reverend Jones and his family by a house fire. The story aired at 5pm.

The principal objective of this CO2 Huff-n-Puff (H-n-P) project is to determine the feasibility and practicality of the technology in a waterflooded shallow shelf carbonate environment. The results of parametric simulation of the CO2 H-n-P process, coupled with the Central Vacuum Unit (CVU) reservoir characterization components will be used to determine if this process is technically and economically feasible for field implementation. The technology transfer objective of the project is to disseminate the knowledge gained through an innovative plan in support of the Department of Energy�s (DOE) objective of increasing domestic oil production and deferring the abandonment of shallow shelf carbonate (SSC) reservoirs. Tasks associated with this objective are carried out in what is considered a timely effort for near-term goals.

This annual report on the activities of the Hazards Control Department (HCD) in 1996 is part of the department's continuing effort to foster a working environment at Lawrence Livermore National Laboratory where every person has the means, ability, and desire to work safely. The significant accomplishments and activities, the various services provided, and research into Environment, Safety, and Health (ES&H) issues by HCD would not have been possible without the many and ongoing contributions by its employees and support personnel. The HCD Leadership Team thanks each and every one in the department for their efforts and work in 1996 and for their personal commitment to keeping one of the premier research and scientific institutions in the world today a safe and healthy place.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

Video footage from the KXAS-TV television station in Fort Worth, Texas, covering a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany an unknown news story. This b-roll footage includes still images of two unidentified men and a press conference with unidentified men about missiles transported to Lithuania. This footage was broadcast at 10pm.

Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Chickasha, Oklahoma that includes local, state, and national news along with advertising.

Weekly newspaper from Electra, Texas that includes local and regional news along with advertising.

Daily newspaper from Sapulpa, Oklahoma that includes local, state, and national news along with advertising.

If dynamical electroweak symmetry breaking is due to a flavor doublet of color sextet quarks, enhanced electroweak scale QCD instanton interactions may produce a large top mass, raise the {eta}{sub 6} axion mass, and also explain the excesses in the DIS cross-section at HERA and jet cross-sections at the Tevatron.

This quarter the project focused primarily in two basic areas. Approximately 60% of the time was applied at continuing to manufacture and test alternate designs of the diesel prechamber and its associated auxiliary equipment. Approximately 23% time was applied to the hydraulic actuation of the gas injector and the design work of applying the gas injector to the engines cylinder liner. The remaining 17% time was spread over a number of areas two of which include the completion of knock detection system and test facility calibration and service.

This document is the final laboratory report for tank 241-S-106 push mode core segments collected between February 12, 1997 and March 21, 1997. The segments were subsampled and analyzed in accordance with the Tank Push Mode Core Sampling and Analysis Plan (TSAP), the Tank Safety Screening Data Quality Objective (Safety DQO), the Historical Model Evaluation Data Requirements (Historical DQO) and the Data Quality Objective to Support Resolution of the Organic Complexant Safety Issue (Organic DQO). The analytical results are included in Table 1. Six of the twenty-four subsamples submitted for the differential scanning calorimetry (DSC) analysis exceeded the notification limit of 480 Joules/g stated in the DQO. Appropriate notifications were made. Total Organic Carbon (TOC) analyses were performed on all samples that produced exotherms during the DSC analysis. All results were less than the notification limit of three weight percent TOC. No cyanide analysis was performed, per agreement with the Tank Safety Program. None of the samples submitted for Total Alpha Activity exceeded notification limits as stated in the TSAP. Statistical evaluation of results by calculating the 95% upper confidence limit is not performed by the 222-S Laboratory and is not considered in this report. No core composites were created …

A non-invasive two-color infrared thermometer has been developed for low-temperature biomedical applications. Mid-infrared radiation from the target is collected via a single 700 {mu}m-bore hollow glass optical fiber, simultaneously split into two paths and modulated by a gold-coated reflective optical chopper, and focused onto two thermoelectrically-cooled HgCdZnTe photoconductors (bandpasses of 2- 6 {mu}m and 2-12 {mu}m, respectively) by gold-coated spherical mirrors. The small numerical aperture of the hollow glass fiber provides high spatial resolution (is less than 1 mm), and the hollow bore eliminates reflective losses. The modulated detector signals are recovered using lock-in amplification, permitting measurement of small low-temperature signal buried in the background. A computer algorithm calculates the true temperature and emissivity of the target in real time based on a previous blackbody (emissivity equal to 1) calibration, taking into account reflection of the ambient radiation field from the target surface.

The next generation, multi-detector active and passive computed tomography (A&PCT) scanner will be optimized for speed and accuracy. At the Lawrence Livermore National Lab (LLNL) we have demonstrated the trade-offs between different A&PCT design parameters that affect the speed and quality of the assay results. These fundamental parameters govern the optimum system design. Although the multi-detector scanner design has priority put on speed to increase waste drum throughput, higher speed should not compromise assay accuracy. One way to increase the speed of the A&PCT technology is to use multiple detectors. This yields a linear speedup by a factor approximately equal to the number of detectors used without a compromise in system accuracy. There are many different design scenarios that can be developed using multiple detectors. Here we describe four different scenarios and discuss the trade-offs between them. Also, some considerations are given in this design description for the implementation of a multiple detector technology in a field- deployable mobile trailer system.

This report emphasizes research since 1993, but includes some description of previous work which has been discussed in prior reports and publications. The research has the objectives of answering the following questions: (1) How are Rn emanation coefficients related to the form of Ra and other U-series decay products? (2) How do Ra and Rn in soil depend on the form and behavior of their ancestors {sup 234}U and {sup 230}Th? (3) Under what conditions can thermally driven convection in soil have significant effects on radon transport in soil? (4) Under what conditions do soil moisture and soil air convection affect Rn in homes, and how are these variables relevant in mitigation?

This subtask was originally titled ``Reheat Combustor Materials`` and was proposed in anticipation of the addition of a reheat combustor to the ICR gas turbine cycle. When the emphasis of ATS became the optimized recuperated cycle, the goal of the subtask was changed to the evaluation of low cost materials for gas turbine combustor liners. It now supplements similar work being conducted by Solar under DOE Contract No.DE-ACO2-92-CE40960, titled ``Ceramic Stationary Gas Turbine (CSGT) Development.`` The use of a ceramic combustor liner in gas turbines contributes to emissions reductions by freeing cooling air for use as primary combustion air and by allowing higher wall temperatures, which contribute to more complete combustion of hydrocarbons. Information from a literature survey, manufacturer`s data, and Solar`s experience was used to select three materials for testing. In addition to material properties requirements for selection, subscale combustor liner cost was required to be at least half of the high modulus continuous fiber reinforced composite part cost. The three materials initially selected for evaluation are listed in Table 1. Four hour subscale rig tests were planned for eight inch diameter liners made from each material. Upon successful completion of each four hour test, a fifty hour test …

Advanced ceramic materials such as Continuous Fiber Reinforced Ceramic Matrix Composites (CFCCs) have had promising results on the companion program entitled ``Ceramic Stationary Gas Turbine`` (CSGT). In particular, CFCCs have outperformed monolithic tiles in structural integrity as a combustor liner. Also, CFCCs have provided the higher temperature operation and improved emissions performance that is required for the ATS combustor. The demonstrated advantages on CSGT justified work to explore the use of advanced ceramic composite materials in other gas turbine components. Sub-tasks include development of a practical, cost effective component fabrication process, development of finite element stress analysis to assure 30,000 hours of component life, and fabrication of a demonstration article.

This paper discusses the development and testing of a low-profile, high-voltage, spark-gap switch designed to be closely coupled with other components into an integrated high-energy pulsed-power source. The switch is designed to operate at 100 kV using SF6 gas pressurized to less than 0.7 MPa. The volume of the switch cavity region is less than 1.5 cm3, and the field stress along the gas-dielectric interface is as high as 130 kV/cm. The dielectric switch body has a low profile that is only I -cm tall at its greatest extent and nominally 2-mm thick over most of its area. This design achieves a very low inductance of less than 5 nH, but results in field stresses exceeding 500 kV/cm in the dielectric material. Field modeling was done to determine the appropriate shape for the highly stressed insulator and electrodes, and special manufacturing techniques were employed to mitigate the usual mechanisms that induce breakdown and failure in solid dielectrics. Static breakdown tests verified that the switch operates satisfactorily at 100 kV levels. The unit has been characterized with different shaped electrodes having nominal gap spacings of 2.0, 2.5, and 3.0 mm. The relationship between self-break voltage and operating pressure agrees well with …

At the time of the start of this project, a battle was being fought between the computer networking technologies and telephone networking technologies. The telecommunications industry wanted to standardize on Asynchronous Transfer Mode (ATM) as the technology of choice for carrying all cross-country traffic. The computer industry wanted to use Packet Transfer Mode (PTM). The project had several goals, some unspoken. At the highest, most obvious level, the project goals were to test the high-speed components being developed by the computer technology industry. However, in addition, both industrial partners were having trouble finding markets for the high-speed networking technology they were developing and deploying. Thus, a part of the project was to demonstrate applications developed at Oak Ridge which would stretch the limits of the network, and thus demonstrate the utility of high-speed networks. Finally, an unspoken goal of the computer technology industry was to convince the telecommunications industry that packet switching was superior to cell switching. Conversely, the telecommunications industry hoped to see the computer technology industry`s packet switch fail to perform in a real-world test. Project was terminated early due to failure of one of the CRADA partners to deliver needed component.

The objectives of the Grant required investigations of cyclic variations in a homogeneous-charge engine initially with gas combustion and the air from ranging from near quiescent to the incorporation of swirl and tumble by valve inserts. Later experiments were performed with unleaded gasoline. The measurements included local velocity and cylinder pressure through the four strokes of a single-cylinder engine, under motored and firing conditions and with examination of the flame kernel growth by combinations of photography and flame-ionization gauges. In all cases, the measurements of in-cylinder characteristics were linked to performance as measured in terms of speed and its variability, load and emissions. The experiments progressed to consider deviations from homogeneous charge and included consideration of stratified charge with local injection of a rich mixture in the vicinity of the spark gap so as to establish a flame kernel which would propagate securely into an overall weak mixture.