Abstract: "The elastic double scattering of deuterons by complex nuclei has been investigated experimentally. Measurements were made on carbon, aluminum, and copper at around 157 Mev; on lithium, beryllium, and carbon at around 125 Mev; and on carbon and aluminum at 94 Mev. The expected tensor components of the deuteron polarization have not been observed. Measurements have been made of the differential cross section and vector-type polarization as a function of angle for the scattering of deuterons from the above elements, at the above energies. The observed polarizations were larger than would be expected on the basis of the individual nucleon-nucleus interactions. In a second experiment we measured the 169-Mev proton-proton polarization at 10, 15, 22.5, 30, and 35 in the laboratory system. The results indicate that partial waves up to and including L = 3 are important at this energy."

The following report describes a gaseous scintillation counting system, including the production and operation of the counter.

This report presents the best estimate possible on the basis of the available information as to how high an energy would be necessary in order that the gas pressure which could be tolerated would be attainable with present techniques (say 10-(-7) mm Hg.)

The following report investigates the cohesive energy of ionic crystal lattices in the alkali halides when at a high pressure.

Abstract: "The measurement of large, high-frequency, short-pulse currents--ordinarily complicated by inductance, stray magnetic fields, and magnetic forces that tend to disassemble the measuring device--is simplified and made with an average error of 2-1/2% by the use of a specially developed noninductive radial shunt in conjuntion with an oscilloscope. The skin-effect correction is derived theoretically and the accuracy of the method is demonstrated."

Abstract: "The neutrons from the linear pinch in Berkeley have been shown to originate from deuteron collisions with a large net center-of-mass velocity in one direction along the axis of the pinch tube. The interpretation of this result is that the neutron production associated with the pinch is non-thermonuclear in origin. The object of this paper is to review the experimental evidence and discuss a possible source of the neutron production."

Abstract: "A cylindrical coil has been designed for pulsed field operation suitable for use in a model thermonuclear reactor. The coil has an eight-inch inside diameter and a length of fifty-one inches. Magnetic mirrors at the ends consist of double-layer solenoids six and one-half inches long designed to slip over the main coil. Subsequent models of this coil have been fabricated which improved the electrical insulation provided by the bonding materials and the mechanical rigidity of the coil. Peak central fields of fifteen kilogauss and mirror fields of thirty kilogauss have been obtained."

"This bibliography lists selected books, articles, and unclassified reports which have appeared in the following abstracts and indexes between August 1959 and December 1960."

Introduction: "It is the purpose of this note to describe the construction and operation of the plasma injectors used in the magnetic high compression experiments in progress at the Lawrence Radiation Laboratory at Livermore. As the investigations of these injections is still in progress, remarks concerning their operation or the characteristics of the injected plasma are of a tentative nature."

"This bibliography is a compilation of titles to unclassified reports, journal articles and conference papers written by members of the University of California Radiation Laboratory, Livermore and Berkeley, relating to Project Sherwood (Controlled Thermonuclear Reactions) from 1953 through 1957."

This is a bibliography referencing documents based on fused lithium salts within the years 1950-57.

Abstract: "Neutron nonelastic cross sections measured at different detector biases have been used to determine the cross sections for inelastically scattering 14 Mev neutrons into 9- to 14-Mev energy range. The cross section for producing these high energy neutrons, which may be attributed to direct interaction processes, is roughly 10% of the nonelastic cross section, for all elements. A comparison is made with data of Coon and co workers, who measured angular distributions for the same high-energy inelastically scattered-neutron group."

Abstract: "Neutron nonelastic cross sections have been measured for 23 elements at 14 Mev, and for a selected set of these elements over the energy ranges 7 to 14 Mev and 21 to 29 Mev. Conventional sphere transmission techniques were used for the measurements. A comparison with optical model calculations of Bjorklund and Fernbach shows excellent agreement."

"This bibliography is a list of references pertaining to factors affecting the motion of the artificial earth satellite. References are foreign and domestic literature."

Abstract: "An absolute measurement of the 14.1-Mev (n, 2n) cross sections of Li-6 and Li-7 has been made using the large scintillator technique, resulting in cross sections in barns of 0.070 +/- 0.006 and 0.056 +/- 0.005 for Li-6 and Li-7, respectively."

Abstract: "Observations on the metabolism of chyle cholesterol in the rat show that exogenous cholesterol entering the systemic circulation in chyle exists in lipoproteins of low density (including chylomicrons) migrating with a high Sf rate (i.e.>400) in the ultracentrifuge. Following entry into the systemic circulation these molecules are rapidly removed from the plasma. This "clearing" of serum chyle cholesterol is a tissue phenomenon, the liver being the predominant site. Within the liver the chyle cholesterol esters are at least partially hydrolyzed; hydrolysis apparently does not occur in the plasma to any appreciable extent. After its entry into the liver exogenous cholesterol, if normally metabolized, presumably mixes with and becomes indistinguishable from cholesterol produced by endogenous synthesis."

A crystallographic study of the transition element beryllides was undertaken in support of phase diagram work. These beryllides are very high melting, and the use of ordinary methods make it difficult to determine stoichiometry. We have succeeded in establishing the compositions and complete crystal structure description of all of the room temperature stable or metastable compounds of the beryllides of niobium, tantalum, titanium zirconium, hafnium, vanadium, chromium and molybdenum. Since some of the structures found were not previously reported, complete structure determinations had to be done.

Abstracts. Results are given for bulk-density and pulse-velocity measurements performed on specimens of the Project Hobo medium. Test techniques, sample handling, and specimen preparation are described. Values are tabulated in terms of sample origin and geological identity.

Abstract. Three groups of 100 foot holes were drilled vertically downward from the floor of U 12e main tunnel and U 123.03 drift at the Nevada Test Site. Distances between holes in each group varied from 13 to 375 feet. One hole in each group was used a a 'shot hole'; the others for seismometers to records the energy generated in the 'shot hole'. Two types of recordings were made. One for dilatational or longitudinal "P" waves and one for transverse or shear "S" waves. Simultaneous recordings were made on photographic paper and on magnetic belts with a minimum of three "specimen" records at each hole, for each type of recording. The magnetic belts were transcribed to 1/2 inch IRIG tape for computer use. Rock density measurements were also made in the holes. From these data Poisson's Ratio, Bulk Modulus, Rigidity Modulus, and Young's Modulus were computed. Elastic constant values obtained 'in sltu' are much higher than those determined by soils laboratory tests on small rock samples. The data obtained are considered to be of exceptionally high accuracy.

Summary. The analysis of the motion of a six-bar linkage is difficult because of the large number of variables involved and the large number of calculations that have to be made for each position of the linkage. If a digital computer is used to make the calculations required for a multi-position analysis of a mechanism, it is feasible to design by analyzing a large numbers of similar linkages and selecting the optimum configuration. In this paper expressions have been derived for the output angle as a function of the input angle and the transmission angle as a function of the input angle for any single-degree-of-freedom six-bar linkage for which the parameters are known An example showing the usefulness of a six-bar computer program as a mechanism design tool is discussed.

Abstract. The peacetime application of nuclear explosives to the conservation and development of our national water resources is, at this time, of sufficient promise to present some of the possibilities publicly. In nuclear explosives man has at his disposal and service, a powerful source of energy - a new tool - that we believe can be utilized safely to excavate channels and lake basins, or to create conduits of broken permeable material and underground reservoirs. In surveying the possible applications of nuclear explosives, the following ideas are among those worthy of serious consideration: (a) the use of nuclear explosives for the economic movement of large volumes of earth in the construction of earth fill dames, (b) the use of nuclear explosives for the diversion of a stream from a river system, whose flow is largely lost to the sea, into another stream channel leading to an arid section or a closed basin, (c) the use of nuclear explosives to create a recharge basin or a conduit to a subsurface aquifer for fresh water recharge, and (d) the use of nuclear explosives to create off-channel reservoirs for the elimination of saline waters through recharge to a mineralized aquifer and by evaporation.

The following quarterly report covers the period of January, February and March of 1954, discussing medical and health physics such as: the metabolic properties of various materials, biological studies of radiation effects, lipoprotein studies, health chemistry, and health physics.

LRL has the responsibility of demonstrating the feasibility of a reactor for use as a power plant for a low-altitude, high-Mach-number missile. This reactor is literally a very high power air heater which must work at temperatures in excess of 2000' F. The reactor is exposed to high loads so one of the primary problems is providing high temperature structure. Considerable effort has been devoted to developing ceramic structural elements. One of the materials considered for this purpose is silicon nitride. In ceramic structural elements operating over large temperature ranges, a major problem is coping with thermal stress. In this respect there is a similarity with the radome problem. The work on silicon nitride at LRL consisted of limited fabrication studies (principally for familiarization), measurement of properties of interest to the application, and funding of fabrication scale-up efforts.

An empirical approach for the evaluation of shielding materials for macrochemical manipulations of spontaneously fissioning heavy elements (curium and californium) has revealed interesting comparisons. High-density metal halide solutions were compared with lead glass and with rare earth glass for use as shielding windows. Laminated shields of lead-paraffin and uranium-paraffin were compared with water and with paraffin for shielding walls.