Graphene receives enormous attention owing to its distinctive physical and chemical prosperities. Growing and transferring graphene to different substrates have been investigated. The graphene growing on the copper substrate has an advantage of low solubility of carbon on the copper which allow us to grow mostly monolayer graphene. Graphene sheet of few centimeters can be transferred to 300nm silicon oxide and quartz crystal pre-deposited with metal like Cu and Ru. Characterization of the graphene has been done with Raman and contact angle measurement and recently quartz crystal microbalance (QCM) has been employed. The underpotential deposition (UPD) process of Bi on Ru metal surface is studied using electrochemical quartz crystal microbalance (EQCM) and XPS techniques. Both Bi UPD and Bi bulk deposition are clearly observed on Ru in 1mM Bi (NO3)3/0.5M H2SO4. Bi monolayer coverage calculated from mass (MLMass) and from charge (MLCharge) were compared with respect to the potential scanning rates, anions and ambient controls. EQCM results indicate that Bi UPD on Ru is mostly scan rate independent but exhibits interesting difference at the slower scan. Bi UPD monolayer coverage calculated from cathodic frequency change (ΔfCathodic) is significantly smaller than the monolayer coverage derived from integrated charge under the cathodic …

Transition metal oxynitrides are of growing interest for their use as electrocatalyst for nitrogen reduction reaction. The metals in the oxynitride used for catalytic process are stabilized in intermediate state for effective activation of nitrogen. Therefore, studying the interaction of metal oxynitrides films to ambient exposure is necessary. Here, sputter deposited vanadium oxynitride is compared to cobalt oxynitride using insitu Auger electron spectroscopy (AES), ex situ X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscopy (SEM). After deposition in Ar/N2 environment, in situ AES spectra indicate that film is vanadium oxynitride despite oxygen is not the reactive gas. In contrast, in situ AES indicate film is pure cobalt nitride at the same base pressure and deposition condition (as vanadium). For ambient exposure, in situ AES indicate the incorporation of oxygen in the cobalt nitride film to form cobalt oxynitride. Ex situ XPS indicate both films get more oxidized but uniformly distributed as there is only slight difference in grazing and normal emission XPS. XRD and SEM also indicate how homogeneously distributed both films are. These finding confirms how important it is that transition metal centers are kept in intermediate oxidation state for the activation of nitrogen bond.

Baeyer-Villiger oxidation of 1,9-dibromopentacyclo[5.4.0.02,6.03,10.05,9]undecane-8,11-dione (1,9-dibromo-PCU-8,11-dione) was performed by using an excess amount of m-chloroperbenzoic acid (3 equivalents) and resulted in the formation of the corresponding monolactone. The reaction would not proceed to the dilactone stage. The structure of the reaction product was established unequivocally via single crystal X-ray diffraction. Baeyer-Villiger oxidation of 1,9-dibromo-PCU-8,11-dione using ceric ammonium nitrate (CAN) was also performed and afforded a mixture of lactones. Only one of these lactones, which also contained an alkene functionality, could be isolated and characterized. 1,7-dibromo-PCU-8,11-dione was also reacted with CAN, yielding the mono-lactone, which has also been characterized.

Previous work was successful at delineating reaction pathways for the photoactivated synthesis of an amine, [CztBu(PyriPr)(NH2−PyriPr)], by double intramolecular C−H activation and functionalization via irradiating a metal(II) azido complex, [CztBu(PyriPr)2NiN3. The present work seeks to expand upon earlier research, and to substitute the metal with iron or cobalt, and to expand the study to photocatalyzed intermolecular C−H activation and functionalization of organic substrates. Density functional theory (DFT) – B3LYP/6-31+G(d') and APFD/Def2TZVP – and time-dependent density functional theory (TDDFT) were used to propose a detailed pathway comprised of intermediates of low, intermediate, or high spin multiplicity and photo-generated excited states for the reaction of the azido complex, [CztBu(PyriPr)2MN3] to form the amine complex [CztBu(PyriPr)M(NH2−PyriPr)], M = Co, Ni or Fe, and the intermediates along the reaction pathway. For applications on quantum computing, the photophysical properties of photoactive d8 nickel(II) complexes are modeled. Such systems take advantage of a two-level system pathway between ground to excited state electronic transitions and could be useful for the discovery of successful candidates for a room temperature qubit, the analogue of a classical computational bit. A modified organometallic model, inspired by a nitrogen vacancy selective intersystem crossing model in diamond, was developed to take advantage of …

Six bis(silyl)acetylenes with the following varied silicon substituents were prepared: I (Me, Me); II (H, H); III (Cl, H); IV (Cl, Cl); V (OMe, H); VI (OMe, OMe). While I and II may be prepared by the reaction of dilithio- or bis(bromomagnesium)-acetylide with appropriate chlorosilane, similar reactions designed to give III - VI give oligomers, YMe_2Si(C≡C-SiMe_2)_nY, VII, Y = Cl, OMe, as the major products indicating that the acetylenic functionality on silicon activates the chlorosilane toward nucleophilic substitution. Compounds III and IV were prepared by free radical chlorination of II. Methanolysis of III and IV gave quantitative yields of V and VI, respectively. In the presence of mineral acid, VI readily cyclized to give high yields of the cyclic siloxane octamethyl-4,9-dioxa-3,5,8,10-tetrasila-cyclodeca-1,6-diyne, VIII, and the analogous triyne, IX. It was determined that V and VI could be prepared directly from II in high yield by methanolysis with palladium catalyst. Vaska's complex also accomplished the conversion. I attempted to prepare bis(ethoxydimethylsilyl)acetylene by using of Wilkinson 's catalyst for hydrosilylation with acetaldehyde. The principal product of this reaction was 1-(dimethylsilyl)-3,5,5-trimethyl-4-oxa-3-silacyclopent-1-ene, XI.

Six peripherally meso-modified Zn (II) porphyrin sensitizer dyes are designed and their J-V performance in dye sensitized solar cell (DSSC) evaluated. Electron-donating groups including phenothiazine, carbazole and pyrene are used to modify the porphyrin macrocycle at the meso-carbon position(s). To compare the effect of donor substitution on the performance of the cells in terms of short circuit current (Jsc), light harvesting efficiency (LHE) and power conversion efficiency (η), two sets of sensitizers with different degrees of substitution are synthesized. One set of dyes (mono-substituted) have one electron donor at trans-position to the acceptor, while the second set (tri-substituted) dyes have three of the same type electron donor groups at 5, 10 and 15 meso-carbon positions making all the six dyes push-pull type sensitizers incorporating 4'-carboxyphenyl as an electron-acceptor/anchor group. Different spectroscopic and electrochemical methods are used to study the photophysical and electrochemical properties of the dyes, while the photovoltaic performance of their cells under 1.5 A.M is studied using solar simulator. Meso-substitution of Zinc (II) porphyrin with these small donor molecules is shown to improve the light harvesting character of the Zinc (II) porphyrin macrocycle in the UV-Vis absorption while at same time improving its fluorescence quantum yield, excited-state life …

Benzenesulfonates, para-substituted with amine, chloride and methyl groups were successfully incorporated into layered double hydroxides of two different compositions, 2:1 Mg-Al LDH and 2:1 Zn-Al LDH. These parent materials were also doped with small amounts of nickel and the differences in the two systems were studied. The hexamethylenetetramine route of layered double hydroxide synthesis was investigated to verify if the mechanism is indeed homogeneous. This included attempting preparation of 2:1 Mg-Al LDH, 2:1 Zn-Al LDH and 2:1 Zn-Cr LDH with two different concentrations of hexamethylenetetramine. The analytical data of the products suggest that the homogeneous precipitation may not be the true mechanism of reaction involved in LDH synthesis by this method.

This thesis describes the reactions of mercury-sensitized isopropyl alcohol when bombarded with 2537 Angstrom radiation.

This thesis describes the reactions and emission spectra of propylene under radio frequency energy radiation.

An extremely facile and novel method called spontaneous deposition, to deposit noble metal nanoparticles on a most stable form of carbon (C) i.e. diamond is presented. Nanometer sized particles of such metals as platinum (Pt), palladium (Pd), gold (Au), copper (Cu) and silver (Ag) could be deposited on boron-doped (B-doped) polycrystalline diamond films grown on silicon (Si) substrates, by simply immersing the diamond/Si sample in hydrofluoric acid (HF) solution containing ions of the corresponding metal. The electrons for the reduction of metal ions came from the Si back substrate. The diamond/Si interfacial ohmic contact was of paramount importance to the observation of the spontaneous deposition process. The metal/diamond (M/C) surfaces were investigated using Raman spectroscopy, scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and x-ray diffractometry (XRD). The morphology (i.e. size and distribution) of metal nanoparticles deposits could be controlled by adjusting the metal ion concentration, HF concentration and deposition time. XRD data indicate the presence of textured and strained crystal lattices of Pd for different Pd/C morphologies, which seem to influence the electrocatalytic oxidation of formaldehyde (HCHO). The sensitivity of electrocatalytic reactions to surface crystal structure implies that M/C could be fabricated for specific electrocatalytic applications. The research also …

The major topics discussed are the phosphorescence sensitization in the lanthanides via energy transfer and in the organics by heavy atom effects. The f-f transitions in lanthanides are parity forbidden and have weak molar extinction coefficients. Upon complexation with the ligand, ttrpy (4'-p-Tolyl-[2,2':6',2"]-terpyridine) the absorption takes place through the ligand and the excitation is transferred to the lanthanides, which in turn emit. This process is known as "sensitized luminescence." Bright red emission from europium and bright green emission from terbium complexes were observed. There is ongoing work on the making of OLEDs with neutral complexes of lanthanide hexafluoroacetyl acetonate/ttrpy, studied in this dissertation. Attempts to observe analogous energy transfer from the inorganic donor complexes of Au(I) thiocyanates were unsuccessful due to poor overlap of the emissions of these systems with the absorptions of Eu(III) and Tb(III). Photophysics of silver-aromatic complexes deals with the enhancement of phosphorescence in the aromatics. The heavy atom effect of the silver is responsible for this enhancement in phosphorescence. Aromatics such as naphthalene, perylene, anthracene and pyrene were involved in this study. Stern Volmer plots were studied by performing the quenching studies. The quenchers employed were both heavy metals such as silver and thallium and lighter …

With the reliability requirements of automobile microelectronics pushing towards near 0 ppb levels of failure control, halide induced corrosion issues in wire bonded devices have to be tightly controlled to achieve such a high reliability goal. With real-time corrosion monitoring, for the first time we demonstrated that the explosive H2 evolution coupled with the oxygen reduction reaction, occurring at the critical Al/Cu interfaces, is the key driving force for the observed aggressive corrosion. Several types of passivation coating on Cu wire surfaces to effectively block the cathodic H2 evolution were explored with an aim to disrupt this explosive corrosion cycle. The properties of the protective coating were evaluated using various analytical techniques. The surface coating exhibited high thermal stability up to 260 °C (evaluated using TGA analysis). A uniform, highly hydrophobic coating (surface contact angle of >130° with water), was achieved by carefully controlling CVD parameters such as time of deposition, surface control of Cu metal, amount of inhibitor compound loading, temperature of coating process etc. FTIR spectroscopy combined with corrosion screening was used to optimize the CVD passivated coating with strong chemisorption. SEM and EDX, XPS were carried out on various coated surfaces to understand the composition and selectivity …

Thermal and flash photolysis studies of ligand-substitution reactions of cis-(pip)(L)M(CO)_4 by L' (pip = piperidine; L, L' = CO, phosphines, phosphites; M = Cr, Mo) implicate square-pyramidal [(L)M(CO)_4], in which L occupies a coordination site in the equatorial plane, as the reactive species. In chlorobenzene (= CB) solvent, the predominant species formed after flash photolysis and a steady-state intermediate for the thermal reaction is cis—[(CB)(L)M(CO)_4], for which rates of CB-dissociation increase with increasing steric demands of coordinated L. Rates of CB-dissociation from trans-[(CB)(L)M(CO)_4] intermediates, formed after photolysis but not thermally, exhibit no observable dependence on the steric properties of the coordinated L.

The kinetics of the reaction of atomic sulfur with acetylene (S (3P) + C2H2) were investigated experimentally via the flash photolysis resonance fluorescence method, and the theoretical potential energy surface for the reaction CN + SO was modeled via the density functional and configuration interaction computational methods. Sulfur is of interest in modern chemistry due to its relevance in combustion and atmospheric chemistry, in the Claus process, in soot and diamond-film formation and in astrochemistry. Experimental conditions ranged from 295 – 1015 K and 10 – 400 Torr of argon. Pressure-dependence was shown at all experimental temperatures. The room temperature high-pressure limit second order rate constant was (2.10 ± 0.08) × 10-13 cm3 molecule-1 s-1. The Arrhenius plot of the high-pressure limit rate constants gave an Ea of (11.34 ± 0.03) kJ mol-1 and a pre-exponential factor of (2.14 ± 0.19) × 10-11 cm3 molecule-1 s-1. S (3P) + C2H2 is likely an adduct forming reaction due to pressure-dependence (also supported by a statistical mechanics analysis) which involves intersystem crossing. The potential energy surface for CN + SO was calculated at the B3LYP/6-311G(d) level and refined at the QCISD/6-311G(d) level. The PES was compared to that of the analogous reaction …

A computational chemistry analysis combined with a crystallographic database study of the bonding in late transition metal N-heterocyclic carbene (NHC) complexes is reported. The results illustrate a metal-carbon bond for these complexes, approximately 4% shorter than that of a M-C single bond found in metal alkyl complexes. As a consequence of this result, two hypotheses are investigated. The first hypothesis explores the possibility of multiple-bond character in the metal-carbon linkage of the NHC complex, and the second, considers the change in the hybridization of the carbenoid carbon to incorporate more p character. The latter hypothesis is supported by the results. Analysis of these complexes using the natural bond orbital method evinces NHC ligands possessing trans influence.

When E- or Z-l-methyl-l-phenyl-2-neopentylsilene was generated by the retro-Diels-Alder vacuum-sealed tube thermolysis of its corresponding anthracene adduct, in the presence of various alkoxysilanes, only one diastereomeric adduct was formed in each case, showing that the reactions are stereospecific. An x-ray crystal structure of the methoxytriphenylsilane adduct of the E-silene confirmed its relative configuration as (R,S) or (S,R). This demonstrated that the addition of alkoxysilanes to silenes is stereospecific and syn. The relative configurations of similar alkoxysilane and alkoxystannane adducts to E- and Z-l-methyl-l-phenyl-2-neopentylsilene were assigned based on a combination of xray structures and *3C NMR data. A strong, nonbonded oxygen-metal interaction is apparent in all of those compounds studied. Treatment of the alkoxystannane adducts with alkyl lithium reagents results in tin-lithium exchange in some cases. The results indicate that the resulting <x-lithio alkoxysilanes are not configurationally stable in either THF or hydrocarbon solvents. The reaction of tert butyl lithium with a-trimethylsilylvinylmethylphenylchlorosilane in hydrocarbon solvents yields E- and Z-l-methyl-l-phenyl-2-neopentyl-2-trimethylsilylsilene. In the absence of any traps these silenes undergo a novel tert butyl lithium catalyzed rearrangement to 2-phenyl-3-trimethylsilyl-5,5-dimethyl-2-silahex-3-ene. These silenes were also trapped as their [4+2] cycloadducts with anthracene. The Z-isomer of the anthracene adduct was separated and its stereochemistry confirmed by …

Web-based homework systems are becoming more common in general chemistry as instructors face ever-increasing enrollment. Yet providing meaningful feedback on assignments remains of the utmost importance. Chemistry instructors consider completion of homework integral to students' success in chemistry, yet only a few studies have compared the use of Web-based systems to the traditional paper-and-pencil homework within general chemistry. This study compares the traditional homework system to four different Web-based systems. Data from eight, semester classes consisting of a diagnostic pre-test, final semester grades, and the number of successful and unsuccessful students are analyzed. Statistically significant results suggest a chemistry instructor should carefully consider options when selecting a homework system.

This dissertation demonstrates that it is possible to create a donor-acceptor system that can transform sunlight into electrons. By using site-directed synthesis, it was possible to create a novel trans-A2B2 porphyrin. In the pursuit of creating a supramolecular system, both the novel (TPA-BT)2ZnP and C60imidazole combined in solution such that the nitrogenous lone pair of C60 imidazole would coordinate axially to the zinc atom in the porphyrin. The conjugates' characterization utilized spectral, electrochemical, and computational techniques. Computational studies revealed in the optimized structure that the HOMO localized on the porphyrin and LUMO centered over the C60imidazole entity. Rehm-Weller calculations showed feasibility of singlet-electron transfer. Femtosecond transient absorption studies documented an efficient photoinduced charge separation in the conjugate. The subsequent work through steady-state and time-resolved transient absorption techniques that photoinduced electron transfer takes place between the synthesized phenylimidazole functionalized bisstyrylBODIPY (BDP(Im)2) and three selected zinc tetrapyrroles. This dyad consisted of BDP(Im)2 and either zinc tetratolylporphyrin (ZnP), zinc-tetra-t-butyl phthalocyanine (ZnPc), or zinc tetra-t-butyl naphthalocyanine (ZnNc) in a solution solvated by σ-dichlorobenzene (DCB). The three dyads (BDP(Im)2:ZnP, BDP(Im)2:ZnPc, and BDP(Im)2:ZnNc) were investigated by spectroscopic, computational, and electrochemical methods. The 1:1 complex of the dyads in optical absorption studies were approximately ~104 M-1 suggesting …

This dissertation focuses on the development, characterization, and analysis of luminescent materials and coatings for sensing applications, including CO2, heavy metals, and silver. Chapter 2 involves the use of a gold(I) pyrazolate trimer that is able to detect silver ions with an AgNP medium. Detection of silver is vital, because there is an influx of silver into our environment caused by the increased use of AgNP. Therefore, having a sensor that is able to differentiate between and detect only Ag ions is an important first step to solving the toxicity mystery of AgNPs. Chapter 3 focuses on the development of sensor coatings containing a Eu(III) based luminescent system for sensing dissolved CO2 without the aid of an absorption-based dye. It is well-known that monitoring CO2 levels in our environment is important since even at low concentrations it can cause adverse health effects to the human body. This work demonstrates a pH-sensitive Eu complex being used directly as a CO2 sensor without the aid of any other absorption-based dye. Chapter 4 explores the idea of developing a heavy metal sensor for lead and its ability to detect lead in wide concentration range upon changing the pH of the medium and the …

The preparation of layered double hydroxides via titration with sodium hydroxide was thoroughly investigated for a number of M(II)/M(III) combinations. These titration curves were examined and used to calculate nominal solubility product constants and other thermodynamic quantities for the various LDH chloride systems.

This study expands the role of polythiophenes as an electron donating chromophore within energy harvesting milti-modular donor-acceptor systems. The polythiophene moiety would act as an electron donating spacer group between the donor and acceptor entities, viz., phenothiazine and fulleropyrrolidine, respectively, in the newly synthesized supramolecular triads. The triads 10-{[2,2';5',2"] terthiophene-5-fulleropyrrolidine} phenothiazine and 10-{[2,2'] bithiophene-5-fulleropyrrolidine} phenothiazine were synthesized and characterized through electrochemical and spectroscopic methods to ascertain their structural integrity. the componets of the triads were selected for their established redox parameters. Phenothiazine would act as a secondary donor and would facilitate hole-transfer from the polythiophene primary electron donor, due to its ease of oxidation and yield a long-lived charge separated state. Fulleropyrrolidine would act as an acceptor for ease of reductive capabilities and its ability to hold multiple charges. Finally, occurrence of photoinduced electron transferleading to the anticipated charge separated states is established from advanced transient spectroscopic techniques on these novel supramolecular systems.

Carbon nanotubes (CNT) have unparalleled mechanical properties, spanning several orders of magnitude over both length and time scales. Computational and experimental results vary greatly, partly due to the multitude of variables. Coupling physics-based molecular dynamics (MD) with informatics methodologies is proposed to navigate the large problem space. The adaptive intermolecular reactive empirical bond order (AIREBO) is used to model short range, long range and torsional interactions. A powerful approach that has not been used to study CNT mechanical properties is the derivation of descriptors and quantitative structure property relationships (QSPRs). For the study of defected single-walled CNTs (SWCNT), two descriptors were identified as critical: the density of non-sp2 hybridized carbons and the density of methyl groups functionalizing the surface. It is believed that both of these descriptors can be experimentally measured, paving the way for closed-loop computational-experimental development. Informatics can facilitate discovery of hidden knowledge. Further evaluation of the critical descriptors selected for Poisson’s ratio lead to the discovery that Poisson’s ratio has strain-varying nonlinear elastic behavior. CNT effectiveness in composites is based both on intrinsic mechanical properties and interfacial load transfer. In double-walled CNTs, inter-wall bonds are surface defects that decrease the intrinsic properties but also improve load transfer. …

The capability to characterize disease states by way of determining novel biomarkers has led to a high demand of single cell and organelle analytical methodologies due to the unexpected heterogeneity present in cells of the same type. Lipids are of particular interest in the search for biomarkers due to their active roles in cellular metabolism and energy storage. Analyzing localized lipid chemistry from individual cells and organelles is challenging however, due to low analyte volume, limited discriminate instrumentation, and common requirements of separation procedures and expenditure of cell sample. Using nanomanipulation in combination with mass spectrometry, individual cells and organelles can be extracted from tissues and cultures in vitro to determine if heterogeneity at the cellular level is present. The discriminate extraction of a single cell or organelle allows the remainder of cell culture or tissue to remain intact, while the high sensitivity and chemical specificity of mass spectrometry provides structural information for limited volumes without the need for chromatographic separation. Mass analysis of lipids extracted from individual cells can be carried out in multiple mass spectrometry platforms through direct-inject mass spectrometry using nanoelectrospray-ionization and through matrix-assisted laser/desorption ionization.

A brief introduction to the current state of research in the Origins of Life field is given in Part I of this work. Part II covers original research performed by the author and co-workers. Layered Double Hydroxide (LDH) systems are anion-exchanging clays that have the general formula M(II)xM(III)(OH)(2x+2)Y, where M(II) and M(III) are any divalent and trivalent metals, respectively. Y can be nearly any anion, although modern naturally occuring LDH systems incorporate carbonate (CO32-), chloride (Cl-), or sulfate (SO42-) anions. Intercalated cobalticyanide anion shows a small yet observable deviation from local Oh symmetry causing small differences between its oriented and non-oriented infrared spectra. Nitroprusside is shown to intercalate into 2:1 Mg:Al LDH with decomposition to form intercalated ferrocyanide and nitrosyl groups of an unidentified nature. The [Ru(CN)6]4- anion is shown to intercalate into layered double hydroxides in the same manner as other hexacyano anions, such as ferrocyanide and cobalticyanide, with its three-fold rotational axis perpendicular to the hydroxide sheets. The square-planar tetracyano-nickelate(II), -palladate(II), and platinate(II) anions were intercalated into both 2:1 and 3:1 Mg:Al layered double hydroxides (LDH). The basal spacings in the 2:1 hosts are approximately 11 Å, indicating that the anions are inclined approximately 75 degrees relative to …