Report issued by the Bureau of Mines over the progress made in emergency mine communications. The results of testing done on low-frequency radio communication are presented. This report includes tables, graphs, illustrations, and photographs.

Description of the standards used by the electrical power industry for the measurement of the electrical quantities.

The following report examines the fission counter, fission plates and activation results of the neutron energy distribution in the center of the Los Alamos plutonium reactor.

The operation of the Fast Reactor is considered in terms of normal equilibrium conditions and normal shut-down. The proposed loading, control rod adjustment and subsequent "floating" operation are discussed. Safety devices and interlocks are described. Temperature and reactivity changes are examined with respect to various system failures, phase changes, and "flashing" of the reactor. Slow changes due to faulty slug cooling are also considered. The calculations were initially based upon 10 kw operation. Performance tests of the mercury system now indicate that 20-kw operation may be feasible.

The following report describes procedures taken to utilize the photelometer to procure the most rapid and reliable determinations, but the goal of the tests presented was to create satisfactory dispersions of particles to analyze.

This progress report discusses progress on oxidation-reduction studies, including polarography, as well as the Uranium-complex formation including electrical transport and spectro-photometric work. This report covers the work done in the period of February of 1945.

The following report analyzes the hydrolytic behavior of cerium and compares them with the actinides of uranium and plutonium.

The following report presents data and conclusions from investigations of the chemical properties of elements 95 (americium, Am) and 96 (curium, Cu) by means of tracer techniques.

Report discussing experiments that were performed to determine whether amino acids in urine could be used as a test of subtle uranium poisoning.

"This appendix presents a description of the loading equipment, the tracking procedure, and the results of tests and observations made during and after the traffic tests on the asphalt stability test section. Analyses of the test results are also included" (p. 1).

"This report presents the results of laboratory and field tests conducted by the Corps of Engineers to develop a method for the design and construction control of asphalt paving mixtures. The investigation consisted of: (a) the selection of a test apparatus and the performance of laboratory studies to develop techniques and procedures; (b) the construction of a test section and the performance of traffic tests with 15,000 and 37,000-lb single and 60,000-lb dual wheel loads to obtain design criteria; and (c) additional laboratory work to adjust the test procedures to the design criteria" (p. 1).

Report presenting an investigation to determine the effects of forward movements of transition on the section characteristics of a 12-percent-thick low-drag airfoil section with a 0.24-chord sealed plain aileron. Section lift and aileron section hinge-moment and seal-pressure characteristics were determined at a specific Reynolds number for aerodynamically smooth surfaces and with fixed transition at two different points.

"The effects of outdoor weathering for 2 years and of an accelerated weathering test on the weight, dimensional stability, and flexural properties of selected reinforced plastics were investigated. The results of all tests, both in this report and the previous report (NACA TN No. 1240), indicate that none of the laboratory aging tests correlated with outdoor weathering with respect to all properties and all materials" (p. 1).

"A flight investigation in natural icing conditions was conducted by the NACA to determine the effect of ice accretion on airplane performance. The maximum loss in propeller efficiency encountered due to ice formation on the propeller blades was 19 percent. During 87 percent of the propeller icing encounters, losses of 10 percent or less were observed" (p. 1).

From Summary: "An investigation to determine the effectiveness of icing protection afforded by air-heating hollow steel unpartitioned propeller blades has been conducted In the NACA Cleveland icing research tunnel. The propeller used was a production model modified with blade shank and tip openings to permit internal passage of heated air. Blade-surface and heated-air temperatures were obtained and photographic observations of Ice formations were made with variations In icing intensity and heating rate to the blades. For the conditions of Icing to which the propeller was subjected, it was found that adequate ice protection was afforded with a heating rate of 40 1 000 Btu per hour per blade."

From Summary: "The icing protection afforded an internal air-heated propeller blade by radial partitioning at 50-percent chord to confine the heated air to the forward half of the blade was determined in the NACA Cleveland icing research tunnel. A modified production-model hollow steel propeller, was used for the investigation. Temperatures of the blade surfaces for several heating rates were measured under various tunnel icing conditions. Photographic observations of ice formations on blade surfaces and blade heat-exchanger effectiveness were obtained."

From Summary: "The icing protection obtained from an internally air-heated propeller blade partitioned to confine the heated air forward of 25-percent chord was investigated in the NACA Cleveland icing research tunnel. A production-model hollow steel propeller was modified with an Internal radial partition at 25-percent chord and with shank and tip openings to admit and exhaust the heated air. Temperatures were measured on the blade surfaces and in the heated-air system during tunnel icing conditions. Heat-exchanger effectiveness and photographs of Ice formations on the blades were obtained."

Report presenting a study of a family of diffusing scrolls designed for use with a mixed-flow impeller and a small-diameter vaneless diffuser. Results regarding a comparison of performance of scrolls and comparison of performance of various compressor configurations are provided.

Report presenting the analysis of the stability derivatives of low-aspect-ratio triangular wings at subsonic and supersonic speeds, which is extended to apply to triangular wings having large vertex angles and traveling at supersonic speeds.

Note presenting results of an investigation made to determine measurements of stability, controllability, and stalling characteristics of five light airplanes. Results regarding the longitudinal stability and control characteristics, lateral stability and control characteristics, stalling characteristics, spinning characteristics, and effect of slots on flying qualities are provided.

"New application of the Lagrangian multiplier method to stability analysis are described by means of elementary examples. The use of the method in analyzing the stability of (a) clamped plates in shear and (b) plate-stiffener combinations is demonstrated. A detailed analysis for finding upper and lower limits to critical stresses of clamped rectangular plates is presented in the appendix" (p. 1).

"By consideration of antisymmetrical, as well as symmetrical, buckling configurations, the theoretical shear buckling stresses of clamped rectangular flat plates are evaluated more correctly than in previous work. The results given, which represent the average of upper- and lower-limit solutions obtained b the Lagrangian multiplier method, are within 1 1/4 percen of true buckling stresses" (p. 1).

Contains derivations, based on a simplified theory, of approximate relations for low-speed stability derivatives of swept wings. Method accounts for the effects and, in most cases, taper ratio. Charts, based on the derived relations, are presented for the stability derivatives of untapered swept wings. Calculated values of the derivatives are compared with experimental results.

"An analytical investigation is made of the effect of shear lag on the bending vibration of wings that are designed essentially as shallow box beams, and a procedure is outlined for incorporating this effect in the determination of bending modes and frequencies. Numerical examples show that shear-lag action in a box beam can have a large influence on its vibration characteristics. The calculations indicate that even though only a small shear-lag action may be observed in a simple static deflection test of the beam, reductions in the second and higher-mode frequencies may be relatively large" (p. 1).