We outline a method to study the spatial and orientation statistics of dynamical dislocation systems by modeling the dislocations as a stochastic fiber process. Statistical measures have been introduced for the density, velocity, and flux of dislocations, and the connection between these measures and the dislocation state and plastic distortion rate in the crystal is explained. A dislocation dynamics simulation model has been used to extract numerical data to study the evolution of these statistical measures numerically in a body-centered cubic crystal under deformation. The orientation distribution of the dislocation density, velocity and dislocation flux, as well as the dislocation correlations have been computed. The importance of the statistical measures introduced here in building continuum models of dislocation systems is highlighted.

None

We present a three-dimensional modeling study of gas flow inthe unsaturated fractured rock of Yucca Mountain. Our objective is toestimate large-scale fracture permeability, using the changes insubsurface pneumatic pressure in response to barometric pressure changesat the land surface. We incorporate the field-measured pneumatic datainto a multiphase flow model for describing the coupled processes ofliquid and gas flow under ambient geothermal conditions. Comparison offield-measured pneumatic data with model-predicted gas pressures is foundto be a powerful technique for estimating the fracture permeability ofthe unsaturated fractured rock, which is otherwise extremely difficult todetermine on the large scales of interest. In addition, this studydemonstrates that the multi-dimensional-flow effect on estimatedpermeability values is significant and should be included whendetermining fracture permeability in heterogeneous fracturedmedia.

We present results from experiments, numerical simulations and analytic modeling, demonstrating enhanced hohlraum performance. Care in the fabrication and handling of hohlraums with walls consisting of high-Z mixtures (cocktails) has led to our demonstration, for the first time, of a significant increase in radiation temperature (up to +7eV at 300 eV) compared to a pure Au hohlraum, in agreement with predictions and ascribable to reduced wall losses. The data extrapolated to full NIF suggest we can expect an 18% reduction in wall loss for the current ignition design by switching to cocktail hohlraums, consistent with requirements for ignition with 1MJ laser energy.

With the planned installation of a superconducting rf system, the new operation mode of TLS, the electron storage ring at NSRRC, is expected to double the beam intensity. Several accelerator physics topics need to be examined. Beam instability of single-bunch longitudinal microwave instability is one of these topics. We consider two approaches to measure the effective broad band impedance. We compare these measurement results with each other and to old data [Ref.1]. We calculate the threshold current of microwave instability with a mode-mixing analysis code written by Dr. K. Oide of KEK [Ref.2]. We also develop a multi-particle tracking code to simulate the instability. The results of simulation and measurement are compared and discussed. We conclude that doubling of beam current from 200 mA (1.5 mA/bunch) to 400 mA (3 mA/bunch) will not trigger the microwave instability even without a Landau cavity to lengthen the bunch. The benefit of Landau cavity is mainly for beam life time.

This report summarizes the accomplishments toward project goals during the first six months of the third year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. Characterization of the gasoline fuel indicates a dominance of single ring alkylcycloalkanes that have a low octane rating; however, blends containing these compounds do not have a negative effect upon gasoline when blended in refinery gasoline streams. Characterization of the diesel fuel indicates a dominance of 3-ring aromatics that have a low cetane value; however, these compounds do not have a negative effect upon diesel when blended in refinery diesel streams. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is …

The Attribute Measurement System with Information Barrier (AMS/IB) specification is being developed in support of the Defense Threat Redcution Agency's (DTRA's) Cooperative Threat Reduction (CTR) program for the Mayak Fissile Material Storage Facility. This document discusses the technologies available for attribute measurement, and advantages and disadvantages of alternatives.

Wet-etch figuring (WEF), a computer-controlled method for generating arbitrarily shaped optical surfaces using wet chemical etching, has been developed. This method uses applicator geometry and surface tension gradients (the Marangoni Effect) to define and confine the footprint of a wetted etchant zone on the surface. Capillary forces attach the flowing etchant solution to the underside of the optic being figured. No mechanical or thermal stresses or residues are applied to the optic by this process. This enables interferometric measurement of the glass thickness while surfacing, which then controls the placement and dwell time of the wetted zone. The result is a truly deterministic, closed-loop figuring process with a high degree of optical precision. This process can figure sub-millimeter thickness, large-aperture plates or sheets that are very difficult to finish by conventional methods. Automated linear and circular spot etching tools were used to demonstrate surfacing on 380 micron-thick glass sheets, to Strehl better than 0.8, as specified by data array or Zernike polynomials.

Recently, studies of the Platte River watershed have gained significant attention from federal and Nebraska, USA, state agencies due to the importance of groundwater/surface-water interactions under drought conditions. Using archive data from a 1983 pumping test, Chen and Chen (2003) interpret the hydraulic properties of the alluvium and a streambed of the Platte River near Kearney, Nebraska, and compare their data with results of other studies performed over the past several years. Three important inconsistencies of this article will be highlighted here: (1) misuse of the analytical model of Hunt (1999), (2) departure of their results from previously published data, and (3) unsatisfactory explanation of these anomalous results.

A swift ion creates a track of electronic excitations in the target material. A net repulsion inside the track can cause a ''Coulomb Explosion'', which can lead to damage and sputtering of the material. Here we report results from molecular-dynamics (MD) simulations of Coulomb explosion for a cylindrical track as a function of charge density and neutralization/quenching time, {tau}. Screening by the free electrons is accounted for using a screened Coulomb potential for the interaction among charges. The yield exhibits a prompt component from the track core and a component, which dominates at higher excitation density, from the heated region produced. For the cases studied, the number of atoms ejected per incident ion, i.e. the sputtering yield Y, is quadratic with charge density along the track as suggested by simple models. Y({tau} = 0.2 Debye periods) is nearly 20% of the yield when there is no neutralization ({tau} {yields} {infinity}). The connections between ''Coulomb explosions'', thermal spikes and measurements of electronic sputtering are discussed.

None

This presentation by Keith Wipke at the 2007 DOE Hydrogen Program Annual Merit Review Meeting provides information about NREL's Controlled Hydrogen Fleet and Infrastructure Analysis Project.

OpenMP [1] is an important API for shared memory programming, combining shared memory's potential for performance with a simple programming interface. Unfortunately, OpenMP lacks a critical tool for demonstrating whether programs are correct: a formal memory model. Instead, the current official definition of the OpenMP memory model (the OpenMP 2.5 specification [1]) is in terms of informal prose. As a result, it is impossible to verify OpenMP applications formally since the prose does not provide a formal consistency model that precisely describes how reads and writes on different threads interact. This paper focuses on the formal verification of OpenMP programs through a proposed formal memory model that is derived from the existing prose model [1]. Our formalization provides a two-step process to verify whether an observed OpenMP execution is conformant. In addition to this formalization, our contributions include a discussion of ambiguities in the current prose-based memory model description. Although our formal model may not capture the current informal memory model perfectly, in part due to these ambiguities, our model reflects our understanding of the informal model's intent. We conclude with several examples that may indicate areas of the OpenMP memory model that need further refinement however it is specified. …

In 2005 the Confederated Tribes of Warm Springs Tribal Council authorized an evaluation of the geothermal development potential on the Confederated Tribes of Warm Springs Reservation of Oregon. Warm Springs Power & Water Enterprises obtained a grant from the U.S. Department of Energy to conduct a geological assessment and development estimate. Warm Springs Power & Water Enterprises utilized a team of expert consultants to conduct the study and develop a strategic plan. The resource assessment work was completed in 2006 by GeothermEx Inc., a consulting company specializing in geothermal resource assessments worldwide. The GeothermEx report indicates there is a 90% probability that a commercial geothermal resource exists on tribal lands in the Mt. Jefferson area. The geothermal resource assessment and other cost, risk and constraints information has been incorporated into the strategic plan.

None

Many materials and electronics need to be tested for the radiation environment expected at linear colliders (LC) since both accelerator and detectors will be subjected to large fluences of hadrons, leptons and {gamma}'s over the life of the facility [1]. While the linacs will be superconducting, there are still many uses for NdFeB in the damping rings, injection and extraction lines and final focus. Our understanding of the situation for rare earth, permanent magnet materials was presented at PAC03 [2]. Our first measurements of fast neutron, stepped doses at the UC Davis McClellan Nuclear Reactor Center (UCD MNRC) were presented at EPAC04 [3]. We have extended the doses, included other manufacturer's samples, and measured induced radioactivities which are discussed in detail.

Windows in the U.S. consume 30 percent of building heating and cooling energy, representing an annual impact of 4.1 quadrillion BTU (quads) of primary energy. Windows have an even larger impact on peak energy demand and on occupant comfort. An additional 1 quad of lighting energy could be saved if buildings employed effective daylighting strategies. The ENERGY STAR{reg_sign} program has made standard windows significantly more efficient. However, even if all windows in the stock were replaced with today's efficient products, window energy consumption would still be approximately 2 quads. However, windows can be ''net energy gainers'' or ''zero-energy'' products. Highly insulating products in heating applications can admit more useful solar gain than the conductive energy lost through them. Dynamic glazings can modulate solar gains to minimize cooling energy needs and, in commercial buildings, allow daylighting to offset lighting requirements. The needed solutions vary with building type and climate. Developing this next generation of zero-energy windows will provide products for both existing buildings undergoing window replacements and products which are expected to be contributors to zero-energy buildings. This paper defines the requirements for zero-energy windows. The technical potentials in terms of national energy savings and the research and development (R&D) status …

The Next and Global Linear Collider (NLC/GLC) designs require precision alignment of the beam in the accelerator structures to reduce short range wakefields. The moderately damped and detuned structures themselves provide suitable higher order mode (HOM) signals to measure this alignment. The modes in the lowest dipole band, whose frequencies range from 14-16 GHz, provide the strongest signals. To determine the position resolution they provide, an NLC/GLC prototype structure that was installed in the ASSET facility of the SLAC Linac was instrumented to downmix and digitize these signals. The beam position within the structure was determined by simultaneously measuring the signals at three frequencies (14.3, 15, 15.7 GHz) corresponding to modes localized at the beginning, the middle and the end of the 60 cm long structure. A resolution of 1 micron was achieved even with 28 dB signal attenuation, which is better than the 5 micron resolution required for the NLC/GLC.

The objective of this calculation was to determine the structural response of a 12-Pressurized Water Reactor (PWR) Long, a 24-Boiling Water Reactor (BWR) and a 5-Defense High Level Waste/Department of Energy (DHLW/DOE)--Long spent nuclear fuel waste packages lifted in a horizontal position. The scope of this calculation was limited to reporting the calculation results in terms of maximum stress intensities in the trunnion collar sleeves. In addition, the maximum stress intensities in the inner and outer shells of the waste packages were presented for illustrative purposes. The information provided by the sketches (Attachments I, II and III) is that of the potential design of the types of waste packages considered in this calculation, and all obtained results are valid for these designs only. This calculation is associated with the waste package design and was performed by the Waste Package Design Section in accordance with the ''Technical work plan for: Waste Package Design Description for LA'' (Ref. 7). AP-3.12Q, Calculations (Ref. 13), was used to perform the calculation and develop the document.

We present measurements of the effective vertical emittance and IP {beta}-function in the PEP-II asymmetric B Factory at SLAC. These beam parameters are extracted from fits to the longitudinal dependence of the luminosity and the vertical luminous size, measured using e{sup +}e{sup -} {yields} {mu}{sup +}{mu}{sup -} events recorded in the BABAR detector. The results are compared, for different sets of machine conditions, to accelerator-based measurements of the optical functions of the two beams.

The measurement of the top quark pair production crosssection inproton-antiproton collisions at 1.96 TeV is a test ofquantumchromodynamics and could potentially be sensitive to newphysics beyondthe standard model. I report on the latest t-tbarcross section resultsfrom the CDF and DZero experiments in various finalstate topologies whicharise from decays of top quark pairs.

None

Seven large power supplies (LGPS) with output ratings from 72kW to 270kW power PEP-II quad magnets in the electron-positron collider region. These supplies have posed serious maintenance and reliability problems since they were installed in 1997, resulting in loss of accelerator availability. A redesign/rebuild program was undertaken by the SLAC Power Conversion Department. During the 2004 summer shutdown all the control circuits in these supplies were redesigned and replaced. A new PWM control board, programmable logic controller, and touch panel have been installed to improve LGPS reliability, and to make troubleshooting easier. In this paper we present the details of this rebuilding program and results.

Chemical kinetic modeling has been used for many years in process optimization, estimating real-time material performance, and lifetime prediction. Chemists have tended towards developing detailed mechanistic models, while engineers have tended towards global or lumped models. Many, if not most, applications use global models by necessity, since it is impractical or impossible to develop a rigorous mechanistic model. Model fitting acquired a bad name in the thermal analysis community after that community realized a decade after other disciplines that deriving kinetic parameters for an assumed model from a single heating rate produced unreliable and sometimes nonsensical results. In its place, advanced isoconversional methods (1), which have their roots in the Friedman (2) and Ozawa-Flynn-Wall (3) methods of the 1960s, have become increasingly popular. In fact, as pointed out by the ICTAC kinetics project in 2000 (4), valid kinetic parameters can be derived by both isoconversional and model fitting methods as long as a diverse set of thermal histories are used to derive the kinetic parameters. The current paper extends the understanding from that project to give a better appreciation of the strengths and weaknesses of isoconversional and model-fitting approaches. Examples are given from a variety of sources, including the former …