Experiments were performed to establish the critical heat flux (CHF) characteristics of heavy water and light water. Testing was performed with the up-flow of heavy and of light water within a 0.3744 inch inside diameter circular tube with 72.3 inches of heated length. Comparisons were made between heavy water and light water critical heat flux levels for the same local equilibrium quality at CHF, operating pressure, and nominal mass velocity. Results showed that heavy water CHF values were, on the average, 8 percent below the light water CHF values.

The Federal Wind Energy Program (FWEP) was initiated to provide focus, direction and funds for the development of wind power. Each year a summary is prepared to provide the American public with an overview of government sponsored activities in the FWEP. This program summary describes each of the Department of Energy's (DOE) current wind energy projects initiated or renewed during FY 1979 (October 1, 1978 through September 30, 1979) and reflects their status as of April 30, 1980. The summary highlights on-going research, development and demonstration efforts and serves as a record of progress towards the program objectives. It also provides: the program's general management structure; review of last year's achievements; forecast of expected future trends; documentation of the projects conducted during FY 1979; and list of key wind energy publications.

The emission of alpha particles in coincidence with the most deeply inelastic heavy-ion reactions has been studied for /sup 181/Ta/sup +/ /sup 165/Ho at 1354 MeV laboratory energy and /sup nat/Ag + /sup 84/Kr at 664 MeV. Alpha particle energy spectra and angular distributions, in coincidence with a projectile-like fragment, were acquired both in the reaction plane and out of the reaction plane at a fixed in-plane angle. The in-plane data for both systems are employed to show that the bulk of the alpha particles in coincidence with the deep-inelastic exit channel can be explained by evaporation from the fully accelerated fragments. Average velocity diagrams, ..cap alpha..-particle energy spectra as a function of angle in several rest frames, and ..cap alpha..-particle angular distributions are presented. The out-of-plane alpha particle angular distributions and the gamma-ray multiplicities are used to study the transfer and partitioning of angular momentum between the two fragments. For the /sup nat/Ag + /sup 84/Kr system, individual fragment spins are extracted form the alpha particle angular distributions as a function of mass asymmetry while the sum of the fragment spins is derived from the gamma-ray multiplicities. These data, together with the fragment kinetic energies, are consistent with rigid …

The next generation of accelerators for high-energy physics will require high-field, small-bore dipole magnets: in the region of 10 T and 40-mm diam. For such magnets, there is a great incentive to attain high overall current density through increasing the current density within the superconductor and minimizing the copper stabilizer. Both Nb-Ti operating at 1.8 K and Nb/sub 3/sn at 4.2 are candidate superconductors. Two programs in the US and one in Japan are directed toward the development of such magnets. The program at LBL is described below.

Major objectives in the process of developing a rugged portable instrument to evaluate dose and dose equivalent have been achieved. A tissue-equivalent proportional counter simulating a 2 micrometer spherical tissue volume has operated satisfactorily for over a year. The basic elements of the electronic system have been designed and tested. And finally, the most suitable mathematical technique for evaluating dose equivalent with a portable instrument has been selected. Design and fabrication of a portable prototype, based on the previously tested circuits, is underway.

An exact stochastic simulation of the Schroedinger equation for charged Bosons and Fermions was used to calculate the correlation energies, to locate the transitions to their respective crystal phases at zero temperature within 10%, and to establish the stability at intermediate densities of a ferromagnetic fluid of electrons.

This report describes the environmental surveillance program conducted by Los Alamos National Laboratory during 1987. Routine monitoring for radiation and radioactive or chemical materials is conducted on the Laboratory site as well as in the surrounding region. Monitoring results are used to determine compliance with appropriate standards and to permit early identification of potentially undesirable trends. Results and interpretation of data for 1987 cover: external penetrating radiation; quantities of airborne emissions and liquid effluents; concentrations of chemicals and radionuclides in ambient air, surface and ground waters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Comparisons with appropriate standards, regulations, and background levels provide the basis for concluding that environmental effects from Laboratory operations are insignificant and do not pose a threat to the public, Laboratory employees, or the environment. 113 refs., 33 figs., 120 tabs.

Measurements of line integrated emission profiles of D/sub ..beta../, OIII, OV, OVI, and CV line radiation have been performed in the ZT-40M device at Los Alamos National Laboratory. The behavior of these emission profiles will be presented for several operating currents, fill pressures, and current risetimes. The basic oxygen radial structures are seen to resemble an onion skin at any particular time, with OIII farthest out in radius and OVI nearest the axis, as one would expect in the absence of any anomalous heating mechanisms (such as thermal instabilities). The rate at which the various lines occur during several different current level discharges appears to be consistent with increased losses for increased I/sub phi/ during the early phases of heating (up to OVI), while the later stages are consistent with a much lower energy loss and a heating rate proportional to I/sup 2/. Evidence of enhanced wall interaction in the latter stages of the discharge is presented.

Work on the development of the directly-fired high temperature air heater (HTAH) for MHD power plants is reported. Progress is reported on three tasks: (1) materials selection, evaluation, and development, (2) operability, performance, and materials testing, and (3) full-scale design concepts. Under Task 1, efforts were carried out in several areas. Work on the computer data base for material properties was begun. Data were compiled for several HTAH materials. Materials selections for Valve Test 3 and full-scale studies were made. Test conditions were defined for and creep results obtained from Montana College of Mineral Science and Technology concerning candidate matrix and hot liner materials. Liaison efforts with refractory manufacturers were continued, and information was provided to Argonne National Laboratory and Babcock and Wilcox concerning the HRSR design. Analyses of materials samples from previous matrix and valve tests were completed. Finally, a thermal stress cycling experiment to be carried out at Montana Tech was designed. Under Task 2, efforts were directed toward running Valve Test 3. Problems were encountered with the VTF hot gas supply duct which necessitated two intermediate shutdowns without reaching the final test goal of 300 hours. Modifications necessary to complete the test were begun. Under Task 3, …

AMAX Research Development Center (AMAX R D) has been investigating methods for enhancing the reactivity and durability of the zinc ferrite desulfurization sorbent. Zinc ferrite sorbents are intended for use in desulfurization of hot coal gas in integrated gasification combined cycle (IGCC) or molten carbonate fuel cell (MCFC) applications. For the present program, the reactivity of the sorbent may be defined as its sulfur sorption capacity at the breakthrough point and at saturation in a bench-scale, fixed-bed reactor. Durability may be defined as the ability of the sorbent to maintain important physical characteristics such as size, strength, and specific surface area during 10 cycles of sulfidation and oxidation.

A new system of detectors (MPS II) which has been installed and operated in the Brookhaven National Laboratory Multiparticle Spectrometer (MPS), consisting of short drift distance drift chambers is briefly described. (WHK)

The objective of the program has been to evaluate potential materials for their chemical and physical stability in molten carbonate fuel cell electrolyte. Eleven powdered candidate materials were selected based on previous physical and chemical stability tests at elevated temperatures on solid materials and/or their thermodynamic stability with respect to proposed degradation reactions. The eleven candidate materials, plus gamma lithium aluminate, were characterized prior to corrosion testing utilizing (a) Chemical Analysis, (b) X-ray Diffraction for Phase Identification, (c) Scanning Electron Microscopy (SEM), and (d) Surface Area Analysis (B.E.T.). The powders were corrosion tested initially for 200 hours by heating to 700/sup 0/C in a mixture of 62% Li/sub 2/CO/sub 3/-38% K/sub 2/CO/sub 3/ under a fuel gas atmosphere. The gas composition was based on reformed Naphtha at 700/sup 0/C and consisted of 50.2% H/sub 2/, 10.8% CO, 9.5% CO/sub 2/, and 29.5% H/sub 2/O. The samples were tested in an inert container made by coating the interior of alumina crucibles with a layer of 0.002-inch gold. Seven of the original test materials (Al rich MgAl/sub 2/O/sub 4/, Mg rich MgAl/sub 2/O/sub 4/, Al/sub 2/(/sub 1-x/)Cr/sub 2x/O/sub 3/, CaZrO/sub 3/, MgTa/sub 2/O/sub 6/, CoAl/sub 2/O/sub 4/, and MgZrO/sub 3/) were eliminated …

The need for a means to express general relationships (networks) among entity occurrences (data sets) in System 2000 data bases is established. Integer expression of general path segments is described as a means to meet this need. Operations on the expressions are also described. Two possible implementations are discussed. Either or both of these implementations can be included by the user in System 2000 data bases. They are compatible with the System 2000 hierarchical data model, and could also be internally implemented as an enhancement to System 2000. 4 figures.

An apparatus and method for injecting a substance, such as a radiopharmaceutical, into the bloodstream of a subject is described. The apparatus comprises an injection means, such as a servo controlled syringe, a means for measuring the concentration of that substance in the subject's bloodstream, and means for controlling the injection in response to the measurement so that the concentration of the substance follows a predetermined function of time. The apparatus of the subject invention functions to inject a substance into a subject's bloodstream at a rate controlled by an error signal proportional to the difference between the concentration of the substance in the subject's bloodstream and the predetermined function.

A method is presented for evaluating the technical and economic potential of geothermal energy for industrial process heat applications. The core of the method is a computer program which can be operated either as a design analysis tool to match energy supplies and demands, or as an economic analysis tool if a particular design for the facility has already been selected. Two examples are given to illustrate the functioning of the model and to demonstrate that results reached by use of the model closely parallel those that have been determined by more traditional techniques. Other features of interest in the model include: (1) use of decision analysis techniques as well as classical methods to deal with questions relating optimization; (2) a tax analysis of current regulations governing percentage depletion for geothermal deposits; and (3) development of simplified correlations for the thermodynamic properties of salt solutions in water.

The sulfur-iodine water-splitting cycle is characterized by the following three reactions: 2H/sub 2/O + SO/sub 2/ + I/sub 2/ ..-->.. H/sub 2/SO/sub 4/ + 2HI; H/sub 2/SO/sub 4/ ..-->.. H/sub 2/O + SO/sub 2/ + 1/2 O/sub 2/; and 2HI ..-->.. H/sub 2/ + I/sub 2/. This cycle was developed at General Atomic after several critical features in the above reactions were discovered. These involved phase separations, catalytic reactions, etc. Estimates of the energy efficiency of this economically reasonable advanced state-of-the-art processing unit produced sufficiently high values (to approx.47%) to warrant cycle development effort. The DOE contract was largely directed toward the engineering development of this cycle, including a small demonstration unit (CLCD), a bench-scale unit, engineering design, and costing. The work has resulted in a design that is projected to produce H/sub 2/ at prices not yet generally competitive with fossil-fuel-produced H/sub 2/ but are projected to be favorably competitive with respect to H/sub 2/ from fossil fuels in the future.

BRUTE is an algorithm to derive the implied boundary of a piecepart from the part's wireframe representation. BRUTE's input is an IGES file. The geometry is extracted and used to derive the edge-vertex (EV) topology. BRUTE then uses a divide-and-conquer method to derive all reasonable face-edge-vertex (FEV) topologies from the EV topology. The final step is to determine the geometry of each face by using the geometry of its edges. Any FEV topology that contains a face that is not a valid surface type is rejected. Valid surface types are plane, cylinder, cone, and sphere.

The sensitization study in the guinea pig did not show gadolinium nitrate to have potential sensitizing properties. Skin application studies in the rabbit demonstrated that it was cutaneously a severe irritant. This material was considered an irritant in the rabbit eye application studies. 3 refs., 1 tab.

The overall objective of this project is to provide a basic understanding of the principal processes that govern fine particulate formation in pulverized coal flames. This understanding is to be sued to develop a model (or models) which will predict the yield and size distribution of fine particulate matter as a function of coal type, coal processing, and combustion conditions. The goal of the model is to provide an engineering tool that will enable the practitioner to estimate the consequences of deign decisions and fuel selection on the fine particulate yield. The practitioner can then make rational decisions regarding the required technology and costs associated with effluent cleanup while still in the design phase.

A critical review of the applications of QCD to low- and high-p/sub T/ interactions of two photons is presented. The advantages of the two-photon high-p/sub T/ tests over corresponding hadronic beam and/or target tests of QCD are given particular emphasis.

Progress in the Savannah River /sup 238/Pu Fuel Form Program is summarized. Work during this period concentrated on the extensive cracking of the /sup 238/PuO/sub 2/ fuel form prior to encapsulation in the iridium containment shell for heat sources. This cracking results in increased recycle cost and decreased production efficiency. To better understand this cracking, Savannah River Laboratory (SRL) has made an extensive review of the development of /sup 238/PuO/sub 2/ fuel forms from small-scale Multi-hundred Watt (MHW) pellets through the current GPHS full-scale pellet production. Historically, /sup 238/PuO/sub 2/ fuel has almost always been uncracked after hot pressing in a graphite die, but has emerged cracked and fragile from the final heat-treatment furnace. The cracking tendency depends on the microstructure of the fuel form and on the hot pressing conditions used to fabricate it. In general, a microstructure of large intershard porosity is more desirable because it allows internal gas to escape more readily and it can absorb more reoxidation strain. Studies of the GPHS microstructure showed that the internal structures of typical GPHS Pellets fabricated at LANL and in the PEF differed significantly. The LANL pellets had severe density gradients and were extensively cracked.

This report covers progress on the Milliwatt Generator Project during April 1983--March 1984. Activities included (plutonium 238 oxide) fuel processing and characterization, production of heat sources, fabrication of pressure-burst test units, compatibility studies, impact testing, examination of surveillance units, Inconel weld development, and qualilty assurance.

This research program has five main objectives: (1) flow properties - to assess the effects of temperature and pressure on absolute and relative permeabilities, on capillary pressure and on any relevant property of petroleum reservoirs; (2) in-situ combustion - tube runs for simulation of in-situ combustion experiments are performed under different pressure and oxygen concentration levels, and kinetics of in-situ combustion reactions are also studied; (3) steam injection with additives - to optimize the steam injection techniques when the control in steam injection is studied; (4) reservoir definition - to improve existing interpretation techniques for well tests, tracer tests and logging; and (5) field support services - to discuss practical problems with representatives of the oil industry. Progress reports are presented for the 5 tasks.

The polymerization of silicic acid in geothermal brine-like aqueous solutions to produce amorphous silica in colloidal form has been studied experimentally and theoretically. A large amount of high quality experimental data has been generated over the temperature rang 23 to 100{sup 0}C. Wide ranges of dissolved silica concentration, pH, and sodium chloride concentration were covered. The catalytic effects of fluoride and the reaction inhibiting effects of aluminum and boron were studied also. Two basic processes have been separately studied: the formation of new colloidal particles by the homogeneous nucleation process and the deposition of dissolved silica on pre-existing colloidal particles. A rigorous theory of the formation of colloidal particles of amorphous silica by homogeneous nucleation was developed. This theory employs the Lothe-Pound formalism, and is embodied in the computer code SILNUC which quantitatively models the homogeneous nucleation and growth of colloidal silica particles in more than enough detail for practical application. The theory and code were extensively used in planning the experimental work and analyzing the data produced. The code is now complete and running in its final form. It is capable of reproducing most of the experimental results to within experimental error. It is also capable of extrapolation to …