Low cross section experiments to produce super-heavyelements have increased the demand for high intensity heavy ion beams atenergies of about 5 MeV/nucleon at the 88-Inch Cyclotron at the LawrenceBerkeley National Laboratory. Therefore, efforts are underway to increasethe overall ion beam transmission through the axial injection line andthe cyclotron. The ion beam emittance has been measured for various ionmasses and charge states. Beam transport simulations including spacecharge effects were performed for both of the injection line and the ionsource extraction. The relatively low nominal injection voltage of 10 kVwas found to be the main factor for ion beam losses, because of beam blowup due to space charge forces at higher intensities. Consequently,experiments and simulations have been performed at higherinjectionenergies, and it was demonstrated that the ion beams could still becentered in the cyclotron at these energies. Therefore, the new injectorion source VENUS and its ion beam transport system (currently underconstruction at the 88-Inch Cyclotron) are designed for extractionvoltages up to 30 kV.

None

OAK-B135 DIRECT ENERGY CONVERSION FISSION REACTOR FOR THE PERIOD MARCH 1,2000 THROUGH MAY 31,2000

One of the most important scenarios for atmospheric modelers is the stable boundary layer (SBL). Airborne material released near the ground will likely be trapped near the ground in high concentrations due to the reduced dispersion in the SBL. Hence the SBL is often the worst case scenario for studies of health impacts from routine or accidental release of toxic materials to the atmosphere. Unfortunately the SBL is very challenging to understand and model correctly. There is also a limited number of field studies with which to verify models, although recent studies (such as CASES-99) are promising. It is difficult for traditional Reynolds-averaged models of turbulence to capture the weak, spatially- and temporally-varying fluctuations that contribute to dispersion the SBL. Large-eddy simulation (LES) has become a promising approach study the SBL because much of the dynamical structure is explicitly resolved and allowed to develop according to the full equations of motion. The presence of topography further complicates the simulation of SBL flows. The drainage flows that develop as the surface cools must be resolved, along with their interaction with other drainage flows of varying scales and the main forcing (synoptic scale) flow. In this study, we have used LES techniques …

Dilute Oxygen Combustion (DOC) burners have been successfully installed and operated in the reheat furnace at Auburn Steel Co., Inc., Auburn, NY, under Phase 3 of the Dilute Oxygen Combustion project. Two new preheat zones were created employing a total of eight 6.5 MMBtu/hr capacity burners. The preheat zones provide a 30 percent increase in maximum furnace production rate, from 75 tph to 100 tph. The fuel rate is essentially unchanged, with the fuel savings expected from oxy-fuel combustion being offset by higher flue gas temperatures. When allowance is made for the high nitrogen level and high gas phase temperature in the furnace, measured NOx emissions are in line with laboratory data on DOC burners developed in Phase 1 of the project. Burner performance has been good, and there have been no operating or maintenance problems. The DOC system continues to be used as part of Auburn Steel's standard reheat furnace practice. High gas phase temperature is a result of the high firing density needed to achieve high production rates, and little opportunity exists for improvement in that area. However, fuel and NOx performance can be improved by further conversion on furnace zones to DOC burners, which will lower furnace …

None

Dilute Oxygen Combustion (DOC) burners have been successfully installed and operated in the reheat furnace at Auburn Steel Co., Inc., Auburn, NY, under Phase 3 of the Dilute Oxygen Combustion project. Two new preheat zones were created employing a total of eight 6.5 MMBtu/hr capacity burners. The preheat zones provide a 30 percent increase in maximum furnace production rate, from 75 tph to 100 tph. The fuel rate is essentially unchanged, with the fuel savings expected from oxy-fuel combustion being offset by higher flue gas temperatures. When allowance is made for the high nitrogen level and high gas phase temperature in the furnace, measured NOx emissions are in line with laboratory data on DOC burners developed in Phase 1 of the project. Burner performance has been good and there have been no operating or maintenance problems. The DOC system continues to be used as part of Auburn Steel?s standard reheat furnace practice. High gas phase temperature is a result of the high firing density needed to achieve high production rates, and little opportunity exists for improvement in that area. However, fuel and NOx performance can be improved by further conversion of furnace zones to DOC burners, which will lower furnace …

The purpose of this analysis is to demonstrate the design of the naval spent nuclear fuel (SNF) waste package (WP) using the Waste Package Department's (WPD) design methodologies and processes described in the ''Waste Package Design Methodology Report'' (CRWMS M&O [Civilian Radioactive Waste Management System Management and Operating Contractor] 2000b). The calculations that support the design of the naval SNF WP will be discussed; however, only a sub-set of such analyses will be presented and shall be limited to those identified in the ''Waste Package Design Sensitivity Report'' (CRWMS M&O 2000c). The objective of this analysis is to describe the naval SNF WP design method and to show that the design of the naval SNF WP complies with the ''Naval Spent Nuclear Fuel Disposal Container System Description Document'' (CRWMS M&O 1999a) and Interface Control Document (ICD) criteria for Site Recommendation. Additional criteria for the design of the naval SNF WP have been outlined in Section 6.2 of the ''Waste Package Design Sensitivity Report'' (CRWMS M&O 2000c). The scope of this analysis is restricted to the design of the naval long WP containing one naval long SNF canister. This WP is representative of the WPs that will contain both naval short …

Acid deposition is a serious problem throughout much of Asia. Emissions of sulfur dioxide (SO{sub 2}) and nitrogen oxides (NO{sub x}) have been increasing steadily, as nations strive to increase their levels of economic development. Coal and fuel oil have been the main choices for powering industrial development; and, until recently, only a few countries (notably Japan and Taiwan) had taken significant steps to avert the atmospheric emissions that accompany fuel combustion. This paper discusses trends in emissions of SO{sub 2} and NO{sub x} that have occurred in Asian countries in the period 1985--1997, using results from the RAINS-ASIA computer model and energy-use trends from the IEA Energy Statistics and Balances database. Emissions of SO{sub 2} in Asia grew from 26.6 Tg in 1985 to 33.7 Tg in 1990 and to 39.2 Tg in 1997. Though SO{sub 2} emissions used to grow as fast as fossil-fuel use, recent limitations on the sulfur content of coal and oil have slowed the growth. The annual-average emissions growth between 1990 and 1997 was only 1.1%, considerably less than the economic growth rate. Emissions of NO{sub x}, on the other hand, continue to grow rapidly, from 14.1 Tg in 1985 to 18.7 Tg in …

None

The thermal stability of Li-ion cells with intercalating carbon anodes and metal oxide cathodes was measured as a function of state of charge and temperature for two advanced cell chemistries. Cells of the 18650 design with Li{sub x}CoO{sub 2} cathodes (commercial Sony cells) and Li{sub x}Ni{sub 0.8}Co{sub 0.2}O{sub 2} cathodes were measured for thermal reactivity. Accelerating rate calorimetry (ARC) was used to measure cell thermal runaway as a function of state of charge (SOC), microcalorimetry was used to measure the time dependence of thermal output, and differential scanning calorimetry (DSC) was used to study the thermal reactivity of the individual components. Thermal decomposition of the anode solid electrolyte interphase (SEI) layer occurred at low temperatures and contributes to the initiation of thermal runaway. Low temperature reactions from 40 C--70 C were observed during the ARC runs that were SOC dependent. These reactions measured in the microcalorimeter decayed over time with power-law dependence and were highly sensitive to SOC and temperature. ARC runs of aged and cycled cells showed complete absence of these low-temperature reactions but showed abrupt exothermic spikes between 105--135 C. These results suggest that during aging the anode SEI layer is decomposing from a metastable state to a …

The current BNFL Inc. flowsheet for the pretreatment of the Hanford High-Level tank wastes includes the use of Superlig{reg_sign} materials for the removal of {sup 137}Cs and {sup 99}Tc from the aqueous fraction of the waste. The cesium-selective Superlig{reg_sign} 644 (SL-644) and the technetium-selective Superlig{reg_sign} 639 (SL-639) have been evaluated in tests with actual waste samples. These materials have a finite processing lifetime in the plant and will need to be disposed of. The composition and level of residual radionuclide contamination is important for assessing various disposal pathways for the Superlig{reg_sign} materials. This report contains the results of analyses of subsamples of the SL-639 and SL 644 materials that have been used in small column testing of actual waste samples at the Radiochemical Processing Laboratory. The wastes that have been tested include samples from Tanks 241-AW-101 and 241-AN-107. The analyses of the spent resins include inductively coupled plasma/atomic emission spectrometry (ICP-AES) for metals, cold vapor atomic absorption (CVAA) spectroscopy for mercury, gamma energy analysis (GEA) for radionuclides and inductively coupled plasma/mass spectrometry (ICP-MS) for selected metals and radionuclides. While these results provide an indication of the analyte concentrations that may be left on the spent resin, they do not fully …

This article provides evidence for the arrival of automated reasoning. Indeed, one of its primary goals of the early 1960s has been reached: The use of an automated reasoning program frequently leads to significant contributions to mathematics and to logic. In addition, although not clearly an original objective, the use of such a program now plays an important role for chip design and for program verification. That importance can be sharply increased; indeed, in this article the authors discuss the possible value of automated reasoning to finding better designs of chips, circuits, and computer code. They also provide insight into the mechanisms--in particular, strategy--that have led to numerous successes. To complement the evidence they present and to encourage further research, the offer challenges and open questions for consideration. They include a glimpse of the future and some commentary on the possibly unexpected benefits of automating the search for answers to open questions.

This report documents a survey of the literature, and provides a compilation of data contained therein, for the {sup 31}P(p,{gamma}){sup 32}S reaction. Attention here is paid mainly to resonance states in the compound-nuclear system {sup 32}S formed by {sup 31}P + p, with emphasis on radiative capture, i.e., gamma-ray decay channels ({sup 32}Si + {gamma}) which populate specific levels in {sup 32}S. The energy region near the proton separation energy for {sup 32}S is especially important in this context for applications in nuclear astrophysics. Properties of the excited states in {sup 32}S are also considered. Summaries of all the located references with significant content are provided and numerical data contained in them are compiled in EXFOR format where applicable.

None

This article focuses on an esoteric but practical use of automated reasoning that may indeed be new to many, especially those concerned primarily with verification of both hardware and software. Specifically, featured are a discussion and some methodology for taking an existing design -- of a circuit, a chip, a program, or the like--and refining and improving it in various ways. Although the methodology is general and does not require the use of a specific program, McCune's program OTTER does offer what is needed. OTTER has played and continues to play the key role in my research, and an interested person can gain access to this program in various ways, not the least of which is through the included CD-ROM in [3]. When success occurs, the result is a new design that may require fewer components, avoid the use of certain costly components, offer more reliability and ease of verification, and, perhaps most important, be more efficient in the contexts of speed and heat generation. Although the author has minimal experience in circuit design, circuit validation, program synthesis, program verification, and similar concerns, (at the encouragement of colleagues based on successes to be cited) he presents materials that might indeed …

This analysis evaluates the radiological consequences of potential Hanford Tank Farm waste transfer leaks. These include ex-tank leaks into structures, underneath the soil, and exposed to the atmosphere. It also includes potential misroutes, tank overflow