The fifth report in a series of five that present unanalyzed pressure data obtained in tests of five full-scale propellers with NACA 16-series blade sections. Pressure distributions on the blade sections were measured under operating conditions to determine the aerodynamic characteristics of each blade section. This particular report presents information for nine radial stations of the NACA 10-(0)(066)-03 propeller.

Report discussing tests using a model of the Navy XP2V-1 to study its performance when ditched. From Summary: "Various landing attitudes, speeds, and conditions of damage were simulated. The performance of the model was determined and recorded from visual observations, by recording time histories of the longitudinal decelerations, and by taking motion pictures of the ditchings."

The results of an experimental investigation of the load distribution over two triangular wings in sideslip at Mach numbers from 1.20 to 1.79 are presented and compared with theory. The two wings tested have identical plan form, 45 degrees sweepback of the leading edge, and an aspect ratio of 4.0. One model was composed of round-nose airfoil sections and the other of sharp-nose, biconvex sections. For both wings the maximum thickness of streamwise sections was 6 percent and was located at the 30-percent chord.

Report presenting a vibrational survey conducted during normal operation of a production eleven-stage axial-flow compressor powered as part of a complete turbojet engine. After serious third-stage vibration was detected, an investigation was conducted to study and eliminate the vibration with several component configurations. The vibrational source was determined to be an aerodynamic phenomenon related to a stall, but a new inlet-guide-vane assembly with a 4-percent increase in inlet area eliminated the vibration and increased the engine thrust 4 percent.

"A new method is presented for obtaining the velocity potential of the flow about a body of revolution moving uniformly in the direction of its axis of symmetry in a fluid otherwise at rest. This method is based essentially on the fact that the form of the differential equation for the velocity potential is invariant with regard to conformal transformation of the meridian plane. By means of the conformal transformation of the meridian profile into a circle a system of orthogonal curvilinear coordinates is obtained, the main feature of which is that one of the coordinate lines is the meridian profile itself" (p. 7).

Report presenting an investigation of rotating stall and surge at low and intermediate speeds conducted on a 10-stage subsonic axial-flow research compressor. Fluctuations of rotating stall and surge were detected by hot-wire anemometers and pressure transducers. Results regarding overall performance and rotating stall, rotating stall and blade vibration, surge, and discussion of surge are provided.

Report presenting the design and experimental performance of a turbine configuration designed to drive a high-speed, high specific-weight-flow supersonic compressor. Results regarding two configurations and their work output, design weight flow, and blade loading are provided.

"Tests were conducted to determine the effect of engine-operating variables and internal coolants on spark-advance requirements of a single cylinder from a 12-cylinder liquid-cooled engine for maximum take-off power and maximum cruise economy. The effects of fuel-air ratio, engine speed, air flow (charge density), mixture temperature, and internal coolants on peak-power (optimum) spark advance were investigated. In addition, tests were conducted to determine the effect of spark advance on the knock-limited engine performance at several mixture temperatures for conditions simulating take-off, high-power cruise, and low-power cruise" (p. 1).

From Summary: "An investigation of the characteristics of a full-scale supersonic-type propeller has been made in the Langley 16-foot transonic tunnel with the 6000-horsepower propeller dynamometer. The tests covered a range of blade angles from 20.2 degrees to 60.2 degrees at forward Mach numbers up to 0.96. The results showed that envelope efficiency at an advance ratio of 2.8 decreased from 86 percent to 72 percent when the forward Mach number was increased from 0.70 to 0.96."

"The problem of oscillating lifting surface of finite span in subsonic compressible flow is reduced to an integral equation. The kernel of the integral equation is approximated by a simpler expression, on the basis of the assumption of sufficiently large aspect ratio. With this approximation the double integral occurring in the formulation of the problem is reduced to two single integrals, one of which is taken over the chord and the other over the span of the lifting surface" (p. 969).

A pneumatic proportional-plus -integral shock-positioning control unit was investigated for controlling a ram-jet engine at a flight Mach number of 2.5 and altitudes of 50,000 to 65,000 feet. A satisfactory of attack, the control action was marginal for the same control settings used at zero angle of attack.

Preliminary results of one phase of a control-motion study program involving several jet fighter-type airplanes are presented in time-history form and are summarized as maximum measured quantities plotted against indicated airspeed. The results pertain to approximately 1,000 maneuvers performed by a Republic F-84G jet-fighter airplane during squadron operational training. The data include most tactical maneuvers of which the F-84G airplane is capable. Maneuvers were performed at pressure altitudes of 0 to 30,000 feet with indicated airspeeds ranging from the stalling speed to approximately 515 knots.

A comprehensive investigation has been carried on with full-scale models in the NACA 20-foot wind tunnel, the general purpose of which is to furnish information in regard to the physical functioning of the composite propeller-nacelle unit under all conditions of take-off, taxiing, and normal flight. This report deals exclusively with the cowling characteristics under condition of normal flight and includes the results of tests of numerous combinations of more than a dozen nose cowlings, about a dozen skirts, two propellers, two sizes of nacelle, as well as various types of spinners and other devices.

"Tests were made of eight full-scale propellers of different shape at various tip speeds up to about 1,000 feet per second. The range of blade-angle settings investigated was from 10 degrees to 30 degrees at the 0.75 radius. The results indicate that a loss in propulsive efficiency occurred at tip speeds from 0.5 to 0.7 the velocity of sound for the take-off and climbing conditions" (p. 517).

It is shown that the lift distribution for a biplane with unequal chords may be calculated by the method developed in NACA Technical report no. 458 if corrections are made for the inequality in chord lengths. The method is applied to four cases in which the upper chord was greater than the lower and good agreement is obtained between observed and calculated lift coefficients.

"The results of an experimental investigation on the boundary-correction factor are presented in this report. The values of the boundary-correction factor from the theory, which at the present time is virtually completed, are given in the report for all conventional types of tunnels. With the isolation of certain disturbing effects, the experimental boundary-correction factor was found to be in satisfactory agreement with the theoretically predicted values, thus verifying the soundness and sufficiency of the theoretical analysis" (p. 79).