"Some aileron load characteristics for three thin wings varying in sweep have been presented for Mach numbers from 0.80 to 1.05. For the transonic Mach number range, shock effects exert a large influence on the loading, but the exact location of each shock for a specific wing design cannot be cataloged at the present time. It is shown, however, that the aileron loading, although greater in magnitude than at subsonic speeds, nevertheless varies in as uniform a fashion as at subsonic speeds" (p. 1).

Report presenting an investigation to determine the possibility of using simplified procedures for the estimation of control loads at supersonic speeds. The results indicated that relatively simple procedures are possible for the estimation of loadings on flap-type controls at supersonic speeds for cases when no flow separation occurs ahead of the hinge line.

Report presenting a wind-tunnel investigation at subsonic Mach numbers up to 0.9 to measure the root-mean-square variation of the normal forces on 27 NACA airfoil sections. The effects of thickness-chord ratio, camber, location of minimum pressure, and leading-edge radius were investigated.

Report presenting a consideration of the problem of shaping an adjoining fuselage for a given wing and supersonic Mach number so that the combination will have a low wave drag. Only fuselages that can be simulated by singularities distributed along the body axis are studied.

Report presenting a blade-vibration and rotating-stall survey on a modified version of a production turbojet engine with a 13-stage axial-flow compressor with a design pressure ratio of 7 and an air flow of 120 pounds per second. This testing was carried out due to the problems rotating stall can cause with both experimental and production axial-flow compressors. Results regarding the rotating-stall patterns, rotor-blade vibrations, radial and axial strength of rotating stall, and maximum rotating-stall speed are provided.

Memorandum presenting the Bell X-5 research airplane tested at 58.7 degrees sweepback during the program to determine the characteristics of a variable-sweep fighter airplane at transonic speeds. This paper includes the stability and control characteristics in the stable lift range up to Mach numbers near 1.0 at an altitude of 40,000 feet and to slightly lower Mach numbers at altitudes of 25,000 feet and 15,000 feet. Results regarding general comments, static stability and control characteristics, and longitudinal dynamic stability are provided.

Report presenting an exploratory investigation of three aluminum disoaps of C(sub 8) acids to determine the gelling properties and stabilizing ability in slurries of 50 percent magnesium power and JP-4 fuel. All of the soaps were found to gel the slurries satisfactorily and to exhibit adequate reproducibility of gel properties. Results regarding the soap behaviors, effects of temperature, viscosity, and formation of the gel structures are provided.

Memorandum presenting pulse techniques applied to strain gages for increasing the output level and extending the usable range. Bonded and unbonded strain gages which normally operate with exciting potentials between 3.5 and 14 volts operated satisfactorily with 200-volt pulses of 1-microsecond duration and a repetition rate of 350 per second. Results regarding maximum allowable voltages, effective pulse duration, sensitivity, minimum readable signal, effects of cable capacitance and inductance, sensitivity to external noise, and linearity are provided.

Report presenting an investigation of the use of aerodynamic and mechanical devices for improving the response of guided missiles. An analysis indicates that the use of free-floating flaps and spring-mounted control surfaces should be able to increase maneuverability to the point that electronic automatic stabilization and gain-adjusting devices can be eliminated.

Report presenting an investigation conducted with trimethyl borate azeotrope and pentaborane fuels in a turbojet combustor. The primary purposes of the study were to determine the effect of boron oxide deposits on the turbine-nozzle area, combustor pressure loss, temperature distribution, and combustion efficiency. Three distinct boron deposit patterns were noted in the investigation.

The problems of static and dynamic longitudinal stability both at high speeds and at low speeds are discussed and data are presented which indicate recent progress made in the solution of these problems.

This report contains a selected list of Government sponsored research projects on related aircraft materials in effect during the calendar year 1947. Information is contained on titles, description, sponsoring and conducting agencies.

The effects on dynamic lateral stability and controllability of some of the important aerodynamic and mass characteristics are discussed and methods are presented for estimating the various stability parameters to be used in the calculation of the dynamic lateral stability of airplanes with swept and low-aspect-ratio wings.

Report presenting an investigation to study cowling-spinner combinations based on the NACA 1-series nose inlets and to obtain systemic data for one family of approximately ellipsoidal spinners. 11 of the spinners were also tested in various combinations with 9 NACA open-nose cowlings, which were also tested without spinners. Results regarding flow over spinners, internal flow, external flow over cowling, critical Mach number characteristics, envelope values, and cowling section are provided.

Report presenting a wind-tunnel investigation to explore the merits of split and chord-extension flaps on a 45 degree sweptback wing. Testing occurred at low speed on a semispan model equipped with split flaps of 60 and 90-percent span and a full-span chord-extension flap. Results regarding split flaps, chord-extension flap, and resultant lift coefficients after balancing pitching-moment coefficients are provided.

Aerodynamic and icing investigations of internal water-inertia separation inlets designed to prevent automatically entrance of large quantities of water into a turbojet engine in icing conditions was conducted on a one-half scale model. A simplified analytical approach to the design of internal water-inertia separation inlets is included. Results show that in order to be effective in preventing screen and guide-vane icing for an inlet of this type, a ram-pressure recovery of 75 percent was attained at design inlet-velocity ratio in an icing condition. For nonicing operation, ram-pressure recovery is comparable to direct-ram inlet.

Report presenting an investigation of the rolling effectiveness of a wing-spoiler arrangement using a rocket-propelled test vehicle in free flight. The configuration investigated in the report is likely not optimum and indicates a need for further exploration.

Report presenting measurements of downwash angles at points at two vertical positions at the probable tail location behind a high-aspect-ratio wing with an NACA 65-210 section with no sweep and 30 degrees and 45 degrees of sweepback and sweepforward in conjunction with a fuselage.

Report presenting an investigation of the problems of static and dynamic longitudinal stability both at high speeds and low speeds as well as information about progress that has been made to solve these problems. The incorporation of large amounts of sweepback on both the wing and horizontal tail can improve the rate of trim changes and stability. Longitudinal stability has been attained for configurations with a sweep angle of 45 degrees with stall-control devices, but experimental proof is needed for these devices.

From Summary: "Theoretical performance data including nozzle-exit temperature, specific impulse, volume specific impulse and composition, temperature, and mean molecular weight of reaction products based on frozen equilibrium and isentropic expansion are presented for 13 propellant combinations at reaction pressure of 300 pounds per square inch absolute and expansion ratio of 20.4. On basis of maximum specific impulse alone, five fuels had the following order for any given oxidant: liquid hydrogen, hydrazine, liquid ammonia, and either hydrazine hydrate or hydroxylamine. Three oxidants with a given fuel had the following order: liquid ozone, liquid oxygen, and 100-percent hydrogen peroxide."

"This report presents the results of pilot observations and photographs of the compression shock wave on the wing of an airplane in flight. A detailed description of the test conditions necessary and the procedure to be following in producing the visible shock are presented. The pilot's observations of the occurrence of an oscillating shock wave and its possible relationship with the airplane buffeting are also presented" (p. 1).

Report presenting testing of a 42.7 degree sweptback tapered wing with three types of ailerons tested at a Mach number of 1.9 and a Reynolds number of 2,200,000; the wing geometry was similar to that of an XS-2 airplane. The purpose of the investigation was to determine the effectiveness of ailerons at these specified flight characteristics. Results regarding the aerodynamic characteristics of the wing are also provided.

Memorandum presenting a review of information relating to aircraft fires to determine what new or further research might lead to a substantial reduction of the aircraft fire hazard in flight and following crashes. An examination of fuels, lubricants, and hydraulic fluids as inflammable liquids is presented, together with possible sources of ignition under the general categories of hot surfaces, electric sparks and arcs, flames, and hot gases.

Report presenting testing on a series of five flat plate models of aspect ratio 2.0 with 25-percent-mean-aerodynamic-chord flaps at a range of Mach numbers in order to investigate the effect of sweepback on flap effectiveness.