Initial Test in the Transonic Range of Four Flutter Airfoils Attached to a Freely Falling Body (open access)

Initial Test in the Transonic Range of Four Flutter Airfoils Attached to a Freely Falling Body

Report presenting the results of testing in the transonic range of four flutter airfoils attached to a freely falling body. Failures of the airfoils were metered and recorded in order to determine the Mach numbers and altitudes of failure.
Date: May 5, 1947
Creator: Barmby, J. G. & Clevenson, S. A.
System: The UNT Digital Library
Aerodynamic Characteristics at a Mach Number of 1.25 of a 6-Percent-Thick Triangular Wing and 6- and 9-Percent-Thick Triangular Wings in Combination With a Fuselage: Wing Aspect Ratio 2.31, Biconvex Airfoil Sections (open access)

Aerodynamic Characteristics at a Mach Number of 1.25 of a 6-Percent-Thick Triangular Wing and 6- and 9-Percent-Thick Triangular Wings in Combination With a Fuselage: Wing Aspect Ratio 2.31, Biconvex Airfoil Sections

Report discussing testing to determine the aerodynamic characteristics of two semispan delta-wing configurations. Information about the lift characteristics, drag characteristics, pitching-moment characteristics, and comparison with other results is provided.
Date: May 5, 1950
Creator: Hall, Albert W. & Morris, Garland J.
System: The UNT Digital Library
Investigation of a Systematic Group of NACA 1-Series Cowling With and Without Spinners (open access)

Investigation of a Systematic Group of NACA 1-Series Cowling With and Without Spinners

Report presenting an investigation to study cowling-spinner combinations based on the NACA 1-series nose inlets and to obtain systemic data for one family of approximately ellipsoidal spinners. 11 of the spinners were also tested in various combinations with 9 NACA open-nose cowlings, which were also tested without spinners. Results regarding flow over spinners, internal flow, external flow over cowling, critical Mach number characteristics, envelope values, and cowling section are provided.
Date: May 5, 1948
Creator: Nichols, Mark R. & Keith, Arvid L., Jr.
System: The UNT Digital Library
Free-flight performance of 16-inch-diameter supersonic ram-jet units 2: five units designed for combustion-chamber-inlet Mach number of 0.16 at free-stream Mach number of 1.60 (units B-1, B-2, B-3, B-4, and B-5) (open access)

Free-flight performance of 16-inch-diameter supersonic ram-jet units 2: five units designed for combustion-chamber-inlet Mach number of 0.16 at free-stream Mach number of 1.60 (units B-1, B-2, B-3, B-4, and B-5)

Free-flight performance of five 16-inch-diameter ram-jet units was determined over range of free-stream Mach numbers of 0.50 to 1.86 and gas total-temperature ratios between 1.0 and 6.1 Time histories of performance data are presented for each unit. Correlations illustrate effect of free-stream Mach number and gas total-temperature ratio on diffuser total-pressure recovery, net-thrust coefficient, and external drag coefficient. One unit had smooth steady burning throughout the entire flight and encountered a maximum free-stream Mach number of 1.86 with a net acceleration of approximately 4.2 g's.
Date: May 5, 1950
Creator: Messing, Wesley E. & Simpkinson, Scott H.
System: The UNT Digital Library
Study of the Pressure Rise Across Shock Waves Required to Separate Laminar and Turbulent Boundary Layers (open access)

Study of the Pressure Rise Across Shock Waves Required to Separate Laminar and Turbulent Boundary Layers

Report presenting a study and experimental investigation on the pressure rise across shock waves required to cause separation of the boundary layer on a flat plate. The interaction of shock wave and boundary layer was investigated experimentally when the boundary layer was caused to separate from the surface of a tube. Results regarding testing and correlation with other results are provided.
Date: May 5, 1952
Creator: Donaldson, Coleman duP. & Lange, Roy H.
System: The UNT Digital Library
Aerodynamic and Lateral-Control Characteristics of a 1/28-Scale Model of the Bell X-1 Airplane Wing-Fuselage Combination: Transonic-Bump Method (open access)

Aerodynamic and Lateral-Control Characteristics of a 1/28-Scale Model of the Bell X-1 Airplane Wing-Fuselage Combination: Transonic-Bump Method

Report discussing an investigation into the lateral-control characteristics and the pitching-moment characteristics of a scale model of the X-1 wing-fuselage configuration. Information about the estimated variation of rolling effectiveness and wing-fuselage pitching-moment coefficient is described in detail.
Date: May 5, 1950
Creator: Lockwood, Vernard E.
System: The UNT Digital Library
Comparison of the aerodynamic characteristics at transonic speeds of a plane wing and a cambered and twisted wing, both having 45 degrees of sweepback and an aspect ratio of 6 (open access)

Comparison of the aerodynamic characteristics at transonic speeds of a plane wing and a cambered and twisted wing, both having 45 degrees of sweepback and an aspect ratio of 6

Report presenting a transonic investigation made by the free-fall technique of a plane wing and a cambered and twisted wing, each with an aspect ratio 6, taper ratio of 0.5, and a sweepback of 45 degrees. Measurements were made of the loads on the exposed wings, pressures on the fuselage in the vicinity of the wing, and acceleration and angle of attack of the complete model.
Date: May 5, 1953
Creator: Holdaway, George H.
System: The UNT Digital Library
Spin Investigation of a 1/29-Scale Model of the Republic XF-91 Airplane with a Conventional Tail Installed (open access)

Spin Investigation of a 1/29-Scale Model of the Republic XF-91 Airplane with a Conventional Tail Installed

"An investigation has been conducted in the Langley 20-foot free-spinning tunnel of a 1/29-scale model of the Republic XF-91 airplane with a.conventional-tail arrangement installed. Previously, tests were made on the model with a vee tail installed. The erect spin and recovery characteristics of the model were determined for the normal loading with the wing installed at various amounts of incidence. The spin investigation also included inverted-spin tests, spin-recovery-parachute tests, tests with the center of gravity moved rearward, and tests with external fuel tanks added to the model" (p. 1).
Date: May 5, 1949
Creator: Klinar, Walter J. & Jones, Ira P., Jr.
System: The UNT Digital Library
Data from Tests of a 1/5-Scale Model of a Proposed High-Speed Submarine in the Langley Full-Scale Tunnel (open access)

Data from Tests of a 1/5-Scale Model of a Proposed High-Speed Submarine in the Langley Full-Scale Tunnel

Tests of a 1/5 scale model of a proposed 153-foot high-speed submarine have been conducted in the Langley full-scale tunnel at the request of the Bureau of Ships, Department of the Navy. The test program included: (1) force tests to determine the drag, control effectiveness, and static stability characteristics for a number of model configurations, both in pitch and in yaw, (2) pressure measurements to determine the boundary-layer conditions and flow characteristics in the region of the propeller, and (3) an investigation of the effects of propeller operation on the model aerodynamic characteristics. In response to oral requests from the Bureau of Ships representatives t hat the basic data obtained in these tests be made available to them as rapidly as possible, this data report has been prepared to present some of the more pertinent results. All test results given in the present paper are for the propeller-removed condition and were obtained at a Reynolds number of approximately 22,300,000 based on model length.
Date: May 5, 1950
Creator: Cocke, Bennie W.; Lipson, Stanley & Scallion, William I.
System: The UNT Digital Library