A 1-J laser was designed to launch light down 16, multi-mode fibers (400-{micro}m-core dia.). A diffractive-optic splitter was designed in collaboration with Digital Optics Corporation (DOC), and was delivered by DOC. Using this splitter, the energy injected into each fiber varied <1%. The spatial profile out of each fiber was such that there were no ''hot spots,'' a flyer could successfully be launched and a PETN pellet could be initiated. Preliminary designs of the system were driven by system efficiency where a pristine TEM{sub 00} laser beam would be required. The laser is a master oscillator, power amplifier (MOPA) consisting of a 4-mm-dia. Nd:YLF rod in the stable, q-switched oscillator and a 9.5-mm-dia. Nd:YLF rod in the double-passed amplifier. Using a TEM{sub 00} oscillator beam resulted in excellent transmission efficiencies through the fibers at lower energies but proved to be quite unreliable at higher energies, causing premature fiber damage, flyer plate rupture, stimulated Raman scattering (SRS), and stimulated Brillouin scattering (SBS). Upon further investigation, it was found that both temporal and spatial beam formatting of the laser were required to successfully initiate the PETN. Results from the single-mode experiments, including fiber damage, SRS and SBS losses, will be presented. In …

Recording of the first public hearing held by the National Commission on Terrorist Attacks upon the United States on April 1, 2003 at the Alexander Hamilton U.S. Custom House in New York City. This hearing specifically addresses the topics of borders, money, and transportation; law enforcement, domestic intelligence, and homeland security; and immediate response to the attacks. This section includes testimony from Steven Brill on the subject of law enforcement, domestic intelligence, and homeland security.

Recording of the ninth public hearing held by the National Commission on Terrorist Attacks upon the United States on April 8, 2004 at the Hart Senate Office Building in Washington, D.C. The Commission heard testimony from Dr. Condoleezza Rice, Assistant to the President for National Security Affairs on the formulation and conduct of U.S. counterterrorism policy.

Recording of the tenth public hearing held by the National Commission on Terrorist Attacks upon the United States on April 13, 2004 in Washington, D.C. The two-day hearing examined the performance of law enforcement and the Intelligence Community prior to September 11 and evaluated post-9/11 reforms in these areas. In addition to witness testimony, four staff statements were delivered during the course of the proceedings. This section includes the opening statement by Chairman Kean, in addition to the staff statement on law enforcement, counterterrorism, and intelligence collection in the United States prior to 9/11, and the first panel with testimony from Louis J. Freeh.

Recording of the tenth public hearing held by the National Commission on Terrorist Attacks upon the United States on April 13, 2004 in Washington, D.C. The two-day hearing examined the performance of law enforcement and the Intelligence Community prior to September 11 and evaluated post-9/11 reforms in these areas. In addition to witness testimony, four staff statements were delivered during the course of the proceedings.This section includes the second panel of the hearing with testimony from former Attorney General, Janet Reno.

Recording of the tenth public hearing held by the National Commission on Terrorist Attacks upon the United States on April 13, 2004 in Washington, D.C. The two-day hearing examined the performance of law enforcement and the Intelligence Community prior to September 11 and evaluated post-9/11 reforms in these areas. In addition to witness testimony, four staff statements were delivered during the course of the proceedings. This section includes the staff statement on threats and responses in 2001 in addition to the third panel on Summer 2001, with testimony from Thomas J. Pickard and J. Cofer Black.

Recording of the tenth public hearing held by the National Commission on Terrorist Attacks upon the United States on April 13, 2004 in Washington, D.C. The two-day hearing examined the performance of law enforcement and the Intelligence Community prior to September 11 and evaluated post-9/11 reforms in these areas. In addition to witness testimony, four staff statements were delivered during the course of the proceedings. This section includes the panel on Summer 2001 with testimony by John Ashcroft, Attorney General of the United States.

Recording of the tenth public hearing held by the National Commission on Terrorist Attacks upon the United States on April 14, 2004 in Washington, D.C. The two-day hearing examined the performance of law enforcement and the Intelligence Community prior to September 11 and evaluated post-9/11 reforms in these areas. In addition to witness testimony, four staff statements were delivered during the course of the proceedings. This section includes the staff statement on the performance of the intelligence community in addition to the panel on Summer 2001 with testimony from George J. Tenet.

Recording of the tenth public hearing held by the National Commission on Terrorist Attacks upon the United States on April 14, 2004 in Washington, D.C. The two-day hearing examined the performance of law enforcement and the Intelligence Community prior to September 11 and evaluated post-9/11 reforms in these areas. In addition to witness testimony, four staff statements were delivered during the course of the proceedings. This section includes the panel on preventing future attacks inside the United States, with testimony from John O. Brennan, Lieutenant General Patrick M. Hughes, John S. Pistole, and James L. Pavitt.

Recording of the tenth public hearing held by the National Commission on Terrorist Attacks upon the United States on April 14, 2004 in Washington, D.C. The two-day hearing examined the performance of law enforcement and the Intelligence Community prior to September 11 and evaluated post-9/11 reforms in these areas. In addition to witness testimony, four staff statements were delivered during the course of the proceedings. This section includes the staff statement on reforming law enforcement, counterterrorism, and intelligence collection in the United States, in addition to the panel on FBI leadership and initiatives post 9/11 with testimony from Robert S. Muller.

This report contains top-level requirements for the various areas of radiological protection for workers. Detailed quotations of the requirements for applicable regulatory documents can be found in the Radiological Design Summary Report Implementation Guide. For the purposes of demonstrating compliance with these requirements, per Engineering Standard 01064, ''shall consider / shall evaluate'' indicates that the designer must examine the requirement for the design and either incorporate or provide a technical justification as to why the requirement is not incorporated. This report describes how the Building 512-S, Actinide Removal Process meets the required radiological design criteria and requirements based on 10CFR835, DOE Order 420.1A, WSRC Manual 5Q and various other DOE guides and handbooks. The analyses supporting this Radiological Design Summary Report initially used a source term of 10.6 Ci/gallon of Cs-137 as the basis for bulk shielding calculations. As the project evolved, the source term was reduced to 1.1 Ci/gallon of Cs-137. This latter source term forms the basis for later dose rate evaluations.

The Defense Threat Reduction Agency, DTRA, is a federal agency charged with safeguarding the nation from weapons of mass destruction, in particular nuclear weapons such as crude devices, and radiological dispersal devices (RDD), also known as dirty bombs. Both of which could be delivered using unconventional means such as by transporting them by a car or boat. Two years ago DTRA partnered with NNSA to evaluate commercially available technologies that could be deployed quickly to defend against threats posed by unconventional nuclear weapons under a program called the Unconventional Nuclear Warfare Defense (UNWD) Program. Lawrence Livermore National Laboratory (LLNL) was one of several National laboratories that participated in this program, which consisted in developing, deploying, and demonstrating detection systems suitable for military base protection. Two key contributions to this program by the LLNL team were the development of two Radiation Detection Buoys (RDB) deployed at Naval Base in Kings Bay in Georgia, and the Detection and Tracking System (DTS) demonstrated at Fort Leonard Wood Missouri, headquarters for the Total Force's Maneuver Support Center (MANSCEN). The RDB's were designed to detect the potential transportation of an unconventional nuclear or radiological weapon by a boat. The RDB's consisted of two commercial marine …

The Chemical Engineering Division is one of six divisions within the Engineering Research Directorate at Argonne National Laboratory, one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, to promote national security, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base by developing innovative technology and transferring it to industry. The Division is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced electrochemical power sources, and management of both high- and low-level nuclear wastes. Additionally, the Division operates the Analytical Chemistry Laboratory, which provides a broad range of analytical services to Argonne and other organizations. The Division is multidisciplinary. Its people have formal training in chemistry; physics; materials science; and electrical, mechanical, chemical, and nuclear engineering. They are specialists in electrochemistry, ceramics, metallurgy, catalysis, materials characterization, nuclear magnetic resonance, repository science, and the nuclear fuel cycle. Our staff have experience working in and collaborating with university, industry …

The objective is to assist the Department of Energy in the development of a low cost, reliable and high performance air compressor/expander. Technical Objective 1: Perform a turbocompressor systems PEM fuel cell trade study to determine the enhanced turbocompressor approach. Technical Objective 2: Using the results from technical objective 1, an enhanced turbocompressor will be fabricated. The design may be modified to match the flow requirements of a selected fuel cell system developer. Technical Objective 3: Design a cost and performance enhanced compact motor and motor controller. Technical Objective 4: Turbocompressor/motor controller development.

In support of CH2M HILL Hanford Group, Inc.'s (CHG) preparation of a Field Investigative Report (FIR) for the closure of the Hanford Site Single-Shell Tank (SST) Waste Management Area (WMA) tank farms, a set of numerical simulations of flow and solute transport was executed to investigate different potential contaminant source scenarios that may pose long-term risks to groundwater from the closure of the S-SX Tank Farm. This report documents the simulation of 7 cases (plus two verification) involving two-dimensional cross sections through the S Tank Farm (Tanks S-101, S102, and S-103) and the simulation of one case involving three-dimensional domain of the S Tank Farm. Using a unit release scenario at Tank S-103, three different types of leaks were simulated. These simulations assessed the effect of leaks during retrieval as well as residual wastes and ancillary equipment after closure. Two transported solutes were considered: uranium-238 (U-238) and technetium-99 (Tc 99). To evaluate the effect of sorption on contaminant transport, six different sorption coefficients were simulated for U 238. Overall, simulations results for the S Tank Farm showed that only a small fraction (< 0.4%) of the U-238 with sorption coefficients  0.6 mL/g migrated from the vadose zone in all …

This project consists of two activities. Task A, Simulations and Measurements, combines all the material model development and associated numerical work with the materials-oriented experimental activities. The goal of this effort is to provide an improved understanding of dynamic material properties and to provide accurate numerical representations of those properties for use in analysis codes. Task B, ALE3D Development, involves general development activities in the ALE3D code with the focus of improving simulation capabilities for problems of mutual interest to DoD and DOE. Emphasis is on problems involving multi-phase flow, blast loading of structures and system safety/vulnerability studies.

Node-on-segment contact is the most common form of contact used today but has many deficiencies ranging from potential locking to non-smooth behavior with large sliding. Furthermore, node-on-segment approaches are not at all applicable to higher order discretizations (e.g. quadratic elements). In a previous work, [3, 4] we developed a segment-to-segment contact approach for eight node hexahedral elements based on the mortar method that was applicable to large deformation mechanics. The approach proved extremely robust since it eliminated the over-constraint that caused 'locking' and provided smooth force variations in large sliding. Here, we extend this previous approach to treat frictional contact problems. In addition, the method is extended to 3D quadratic tetrahedrals and hexahedrals. The proposed approach is then applied to several challenging frictional contact problems that demonstrate its effectiveness.

None

The purpose of this study was to examine the hypothesis that clastic dikes could form a preferential flow path through the vadose zone to the water table at the Hanford Site. Clastic dikes are subvertical structures that form within sedimentary sequences after deposition and cut across the original sedimentary layers. They are common throughout the Hanford Site, often occurring in organized polygonal networks. In the initial phase of the project, we analyzed the large-scale geometry of the clastic dikes and developed an algorithm for simulating their spatial distribution. This result will be useful in providing maps of the potential distribution of clastic dikes in areas where they are not exposed at the surface (e.g., where covered by windblown sand or construction of facilities like tank farms at the surface). In addition to the study of the large-scale distribution of the dikes, a major focus of the project was on field, laboratory, and modeling studies of the hydrogeological properties of the clastic dikes and the effect that they have on transport of water through the vadose zone. These studies were performed at two field locations at the Hanford Site. We performed an extensive series of field and laboratory measurements of a …

Ab initio electronic structure methods can supplement CALPHAD in two major ways for subsequent applications to stability in complex alloys. The first one is rather immediate and concerns the direct input of ab initio energetics in CALPHAD databases. The other way, more involved, is the assessment of ab initio thermodynamics {acute a} la CALPHAD. It will be shown how these results can be used within CALPHAD to predict the equilibrium properties of multi-component alloys.

Crystals of potassium dihydrogen phosphate (KH{sub 2}PO{sub 4}, KDP) are grown in large scale for use as nonlinear material in laser components. Traces of trivalent metal impurities are often added to the supernatant to achieve habit control during crystal growth, selectively inhibiting the growth of the {l_brace}100{r_brace} face. Model systems representing AlPO{sub 4}-doped KDP {l_brace}100{r_brace} stepped surfaces are prepared and studied using ab initio quantum methods. Results of Hartree-Fock partial optimizations are presented, including estimated energies of ion pair binding to the steps. We find that the PO{sub 4}{sup 3-} ion takes a position not unlike that of a standard phosphate in the crystal lattice, while the aluminum atom is displaced far from a K{sup +} ion position to establish coordinations with the PO{sub 4}{sup 3-} ion and to bind with another lattice-bound phosphate. Our optimized structures suggest that it is the formation of a fourth coordination of Al(III) to a third phosphate ion from solution, or perhaps from a nearby position in the lattice, that disrupts further deposition, pinning the steps.

We report the results of variational calculations of elastic electron scattering by tetrafluoroethene, C{sub 2}F{sub 4}, with incident electron energies ranging from 0.5 to 20 eV, using the complex Kohn method and effective core potentials. These are the first fully calculations to reproduce experimental angular differential cross sections at energies below 10 eV. Low-energy electron scattering by C{sub 2}F{sub 4} is sensitive to the inclusion of electronic correlation and target-distortion effects. We therefore present results that describe the dynamic polarization of the target by the incident electron. The calculated cross sections are compared with recent experimental measurements.

This report provides a summary of the structure of the Abandon Mine Land (AML) program, distribution of funds, and discusses major proposals considered in the 108th Congress.

We have designed an experimental technique to use on the National Ignition Facility (NIF) laser to achieve very high pressure (P{sub max} &gt; 10 Mbar = 1000 GPa), dense states of matter at moderate temperatures (kT &lt; 0.5 eV = 6000 K), relevant to the core conditions of the giant planets. A discussion of the conditions in the interiors of the giant planets is given, and an experimental design that can approach those conditions is described.