This document is a tutorial on the CCA Standard as realized through the Decaf implementation. Decaf does not equal the CCA standard much in the same way that Microsoft Visual C++ is not ANSI/ISO C++. This document was created because the CCA standard is evolving and still too fluid to nail down in a tutorial document. Because of its fluidity, and that it represents a hotbed of research and development, beginners can only start learning CCA by choosing one of the frameworks (warts and all). Decaf has just enough functionality to be a useful tool for beginners in the CCA to get started on. Though it lacks many features of the bigger CCA frameworks (CCAFE [3], XCAT [10], and SciRUN [8]) where the heavy-duty research is still going on, it is the first CCA framework that is underpinned by Babel, which provides its language interoperability features. This document can also serve the dual-purpose of providing a reasonable-sized example of building an application using Babel. The entire source for Decaf is included in the examples/subdirectory of the Babel code distribution. This manual assumes the reader is a programmer who has a conceptual understanding of the Babel Language Interoperability Tool. They should …

This report summarizes a research and development program that produced a stand-alone active desiccant module (ADM) that can be easily integrated with new or existing packaged cooling equipment. The program also produced a fully integrated hybrid system, combining the active desiccant section with a conventional direct expansion air-conditioning unit, that resulted in a compact, low-cost, energy-efficient end product. Based upon the results of this investigation, both systems were determined to be highly viable products for commercialization. Major challenges--including wheel development, compact packaging, regeneration burner development, control optimization, and low-cost design--were all successfully addressed by the final prototypes produced and tested as part of this program. Extensive laboratory testing was completed in the SEMCO laboratory for each of the two ADM system approaches. This testing confirmed the performance of the ADM systems to be attractive compared with that of alternate approaches currently used to precondition outdoor air, where a return air path is not readily available for passive desiccant recovery or where first cost is the primary design criterion. Photographs, schematics, and performance maps are provided for the ADM systems that were developed; and many of the control advantages are discussed. Based upon the positive results of this research and development …

The purpose of this work was to provide chemical- and physical-property data addressing the technical risks of the Caustic-Side Solvent Extraction (CSSX) process as applied specifically to the removal of cesium from alkaline high-level salt waste stored at the US Department of Energy Savannah River Site. As part of the overall Salt Processing Project, this effort supported decision-making in regards to selecting a preferred technology among three alternatives: (1) CSSX, (2) nonelutable ion-exchange with an inorganic silicotitanate material and (3) precipitation with tetraphenylborate. High risks, innate to CSSX, that needed specific attention included: (1) chemical stability of the solvent matrix, (2) radiolytic stability of the solvent matrix, (3) proof-of-concept performance of the proposed process flowsheet with simulated waste, and (4) performance of the CSSX flowsheet with actual SRS high-level waste. This body of work directly addressed the chemical-stability risk and additionally provided supporting information that served to plan, carry out, and evaluate experiments conducted by other CSSX investigators addressing the other high risks. Information on cesium distribution in extraction, scrubbing, and stripping served as input for flowsheet design, provided a baseline for evaluating solvent performance under numerous stresses, and contributed to a broad understanding of the effects of expected process …

Nanogold{reg_sign}, a gold cluster with a core of gold atoms 1.4 nm in diameter, has proven to be a superior probe label for electron microscopy (EM), giving both higher labeling density and improved access to previously hindered or restricted antigens. It may be visualized by autometallography (AMG) for use in light microscopy (LM): silver-and gold-amplified Nanogold detection has proven to be one of the most sensitive methods available for the detection of low copy number targets such as viral DNA in cells and tissue specimens. AMG enhancement has also made Nanogold an effective detection label in blots and gels. The following protocols will be described: Labeling of nuclear components in cells. Protocol for in situ hybridization and detection with fluorescein-Nanogold--or Cy3{trademark}-Nanogold-labeled streptavidin. Nanogold is an inert molecule, and generally does not interact with biological molecules unless a specific chemical reactivity is introduced into the molecule. Conjugates are prepared using site-specific chemical conjugation through reactive chemical functionalities introduced during Nanogold preparation, which allows the gold label to be attached to a specific site on the conjugate biomolecule. For example, a maleimido-Nanogold derivative, which is specific for thiol binding, is frequently attached to the hinge region of an antibody at a unique …

Attribute measurement systems are being developed in support of arms-reduction negotiations to verify compliance with the disassembly of nuclear weapons and disposition of material. The currently demonstrated attribute measurement systems utilize nuclear radiation detection technologies. Alternative low-intrusion non-nuclear measurement techniques may offer access to relevant information, e.g. mass of an item, when combined with information from a nuclear radiation measurement. This document examines the application of low-intrusion non-nuclear methods in combination with nuclear methods for attribute measurement systems. Several specific combinations are evaluated.

This Corrective Action Decision Document/Closure Report (CADD/CR) has been prepared for Corrective Action Unit (CAU) 405, Area 3 Septic Systems, in accordance with the Federal Facility Agreement and Consent Order. Located on the Tonopah Test Range (TTR) approximately 235 miles north of Las Vegas, Nevada, CAU 405 consists of three Corrective Action Sites (CASs): 03-05-002-SW03, Septic Waste System (aka: Septic Waste System [SWS] 3); 03-05-002-SW04, Septic Waste System (aka: SWS 4); 03-05-002-SW07, Septic Waste System (aka: SWS 7). The CADD and CR have been combined into one report because no further action is recommended for this CAU, and this report provides specific information necessary to support this recommendation. The CAU consists of three leachfields and associated collection systems that were installed in or near Area 3 for wastewater disposal. These systems were used until a consolidated sewer system was installed in 1990. Historically, operations within various buildin gs in and near Area 3 of the TTR generated sanitary and industrial wastewaters. There is a potential that contaminants of concern (COCs) were present in the wastewaters and were disposed of in septic tanks and leachfields. The justification for closure of this CAU without further action is based on process knowledge and …

Burnable poisons are used in all modern nuclear reactors to permit higher loading of fuel without the necessity of an overly large control rod system. This not only permits a longer core life but can also be used to level the power distribution. Commercial nuclear reactors commonly use B{sub 4}C in separate non-fueled rods and more recently, zirconium boride coatings on the fuel pellets or gadolinium oxide mixed with the fuel. Although the advantages are great, there are problems with using these materials. Boron, which is an effective neutron absorber, transmutes to lithium and helium upon absorption of a neutron. Helium is insoluble and is eventually released to the interior of the fuel rod, where it produces an internal pressure. When sufficiently high, this pressure stress could cause separation of the cladding from the fuel, causing overly high centerline temperatures. Gadolinium has several very strongly absorbing isotopes, but not all have large cross sections and result in residual burnable poison reactivity worth at the end of the fuel life. Even if the amount of this residual absorber is small and the penalty in operation small, the cost of this penalty, even if only several days, can be very high. The …

This report provides recommended durability-based design properties and criteria for a quasi-isotropic carbon-fiber composite for possible automotive structural applications. The composite, which was made by a rapid molding process suitable for high-volume automotive applications, consisted of continuous Thornel T300 fibers (6K tow) in a Baydur 420 IMR urethane matrix. The reinforcement was in the form of four {+-}45{sup o} stitch-bonded mats in the following layup: [0/90{sup o}/{+-}45{sup o}]{sub S}. This material is the second in a progression of three candidate thermoset composites to be characterized and modeled as part of an Oak Ridge National Laboratory project entitled Durability of Carbon-Fiber Composites. The overall goal of the project, which is sponsored by the U.S. Department of Energy's Office of Advanced Automotive Technologies and is closely coordinated with the industry Automotive Composites Consortium, is to develop durability-driven design data and criteria to assure the long-term integrity of carbon-fiber-based composite systems for large automotive structural components. This document is in two parts. Part I provides the design criteria, and Part 2 provides the underlying experimental data and models. The durability issues addressed include the effects on deformation, strength, and stiffness of cyclic and sustained loads, operating temperature, automotive fluid environments, and low-energy impacts …

This report covers phase 2 (year 2) of the Nucleic Acid System--Hybrid PCR and Multiplex Assay project. The objective of the project is to reduce to practice the detection and identification of biological warfare pathogens by the nucleic acid recognition technique of PCR (polymerase chain reaction) in a multiplex mode using flow cytometry. The Hybrid instrument consists of a flow-through PCR module capable of handling a multiplexed PCR assay, a hybridizing module capable of hybridizing multiplexed PCR amplicons and beads, and a flow cytometer module for bead-based identification, all controlled by a single computer. Multiplex immunoassay using bead-based Luminex flow cytometry is available, allowing rapid screening for many agents. PCR is highly specific and complements and verifies immunoassay. It can also be multiplexed and detection provided using the bead-based Luminex flow cytometer. This approach allows full access to the speed and 100-fold multiplex capability of flow cytometry for rapid screening as well as the accuracy and specificity of PCR. This project has two principal activities: (1) Design, build and test a prototype hybrid PCR/flow cytometer with the basic capabilities for rapid, broad spectrum detection and identification, and (2) Develop and evaluate multiplex flow analysis assay protocols and reagents for the …

None

Pulsed lasers offer the capability of rapid material removal. Here we present simulations of steel coupon tests by two solid state heat capacity lasers built at LLNL. Operating at 1.05 pm, these deliver pulse energies of about 80 J at 10 Hz, and about 500 J at 20 Hz. Each is flashlamp-pumped. The first laser was tested at LLNL, while the second laser has been delivered to HELSTF, White Sands Missile Range. Liquid ejection appears to be an important removal mechanism. We have modeled these experiments via a time-dependent code called THALES, which describes heat transport, melting, vaporization, and the hydrodynamics of liquid, vapor, and air. It was previously used, in a less advanced form, to model drilling by copper vapor lasers [1] . It was also used to model vaporization in beam dumps for a high-power laser [2]. The basic model is in 1D, while the liquid hydrodynamics is handled in 2D.

Experimental tests have been undertaken to determine safe levels of laser exposure on bare high explosive (HE) samples and on common metals used in intimate contact with HE. Laser light is often focused on bare HE and upon metals in contact with HE during alignment procedures and experimental metrology experiments. This paper looks at effects caused by focusing laser beams at high energy densities directly onto the surface of various bare HE samples. Laser energy densities (fluence) exceeding 19 kilowatts/cm{sup 2} using a 5-milliwatt, 670 nm, cw laser diode were generated by focusing the laser down to a spot size diameter of 4 microns. Upon careful inspection, no laser damage was observed in any of the HE samples illuminated at this fluence level. Direct laser exposure of metals directly contacting HE surfaces was also tested. Laser energy densities (fluence) varying from 188 Watts/cm{sup 2} to 12.7 KW/cm{sup 2} were generated using an 11-Watt, 532 nm frequency-doubled Nd:YAG cw laser with focal spot size diameters as small as 100 microns. These measurements look at the temperature rise of the surface of the metal in contact with HE when laser energy is incident on the opposite side of the metal. The temperature …

For many applications, silver salt-based autometallography (often also called silver enhancement or silver development) is required to visualize colloidal gold (1-5 nm in diameter) or the small 1.4 nm Nanogold{reg_sign} particles (Nanoprobes, Yaphank, NY, USA). Although even Nanogold may be seen directly by scanning-transmission electron microscopy (STEM), by transmission EM (TEM; in thin sections without stain or ice-embedded cryo-EM samples), energy filtered TEM, and scanning EM (SEM), silver enhancement makes viewing in the EM more facile since the particles are enlarged to approximately 10 to 20 nm, convenient for most specimens. Autometallographic (AMG) enhancement is required in order to visualize smaller gold particles such as Nanogold for light microscopy (LM) or in blots or gels. This chapter includes the following protocols: Protocol for HQ silver enhancement of Nanogold; Protocols for use of silver-enhanced Nanogold with osmium tetroxide--(A) Procedure using reduced concentration of OsO{sub 4}; (B) Procedures for gold toning; Protocol for HQ silver enhancement of Nanogold in pre-embedding immunocytochemistry for cell cultures; Protocol for gold enhancement of Nanogold for EM; Protocol for gold enhancement of Nanogold for LM; Protocol for staining blots with Nanogold and silver enhancement; and Protocol for staining gels with Nanogold and silver enhancement.

The authors present results from a parameter study investigating the stability of underground structures in response to ground shock. Direct simulation requires detailed knowledge of both the facility itself and the surrounding geology. In practice, however, key details (joint spacing, joint stiffness, reinforcement) may not be available. Thus, in order to place bounds upon the predicted behavior of a given facility, an extensive series of simulations representing different realizations may be required. They will discuss the distinct element method (DEM) with particular emphasis on techniques for achieving improved computational efficiency, including the handling of contact detection and approaches to parallelization. Some continuum approaches to the simulation of underground facilities are discussed along with results from underground explosions. Finally, their DEM code is used to simulate dynamic loading of several generic subterranean facilities in hard rock for a range of joint properties and sources, demonstrating the suitability of the DEM for this application.

It is peculiar that in situ hybridization (ISH), a technique with many similarities to immunohistochemistry (IHC), has not enjoyed the phenomenal growth in both basic research and clinical applications as has its sister technique IHC. Since the late 1970s, when immunoperoxidase techniques began to be applied to routine diagnostic material and to numerous research applications, there has been a natural evolution of the IHC procedure. Namely, only a few primary antibodies were available commercially at the onset, and only one indirect and the peroxidase-antiperoxidase (PAP) technique detection systems were in place. With the advent of avidin-biotin detection systems and monoclonal antibodies, and a viable commercial market, extraordinary growth of the procedure's applications in clinical research and diagnostic pathology occurred during the subsequent two decades. Today, IHC is automated and widely used for research purposes and, to a large extent, has become a routine diagnostic ''special stain'' in most clinical laboratories. During the same period, ISH enjoyed very little growth in both research and diagnostic applications. What has accounted for this lack of maturation of the technique? The success of IHC is part of the reason measuring a gene's encoded protein routinely and inexpensively, particularly as automation evolved, rendered IHC a …

Recent advances in laser and optical technologies have now enabled the current generation of high intensity, ultrashort-pulse lasers to achieve focal intensities of 10{sup 20}-10{sup 21} W/cm{sup 2} in pulse durations of 100-500fs. These ultraintense laser pulses are capable of producing highly relativistic plasma states with densities, temperatures, and pressures rivaling those found in the interiors of stars and nuclear weapons. Utilizing the ultraintense 100TW JanUSP laser at LLNL we have explored the possibility of ion shock heating small micron-sized plasmas to extremely high energy densities approaching 1GJ/g on timescales of a few hundred femtoseconds. The JanUSP laser delivers 10 Joules of energy in a 100fs pulse in a near diffraction-limited beam, producing intensities on target of up to 10{sup 21}W/cm{sup 2}. The electric field of the laser at this intensity ionizes and accelerates electrons to relativistic MeV energies. The sudden ejection of electrons from the focal region produces tremendous electrostatic forces which in turn accelerate heavier ions to MeV energies. The predicted ion flux of 1 MJ/cm{sup 2} is sufficient to achieve thermal equilibrium conditions at high temperature in solid density targets. Our initial experiments were carried out at the available laser contrast of 10{sup -7} (i.e. the contrast …

This report describes the groundwater monitoring and corrective-action program at the M-Area Hazardous Waste Management Facility (HWMF) and the Metallurgical Laboratory (Met Lab) HWMF at the Savannah River Site (SRS) during 2000. This program is required by South Carolina Resource Conservation and Recovery Act (RCRA) Hazardous Waste Permit SC1890008989 and Section 264.100(g) of the South Carolina Hazardous Waste Management Regulations.

The High Level Waste Tank Farms store and process high-level liquid wastes from a number of sources including F- and H-Canyons. These wastes are made alkaline prior to transfer to the Tank Farm and are subject to acceptance based on their composition. These wastes may contain significant concentrations of ammonia from flushing of the process vessel vent system. The Authorization Basis for the Tank Farm limits ammonia concentrations in canyon receipts to control flammability in pump tanks and waste tanks. However, during flushing of the canyon process vessel vent systems, the current limits pose significant operational restrictions. It was originally thought that the current limits based on data obtained by Pacific Northwest National Laboratory (PNNL), on a Hanford salt solution might be overly conservative with respect to salt solutions normally found in SRS Pump Tanks. However, on investigation of the possible range of concentrations based on canyon transfer data, it was found that pump tank salt solution concentrations probably did not differ significantly from the salt solution tested by PNNL. This report documents the work performed as originally described in the task technical plan.

Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2000 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report.

The increased use of object-oriented toolkits in large-scale scientific simulation presents new opportunities and challenges for the use of automatic (or algorithmic) differentiation (AD) techniques, especially in the context of optimization. Because object-oriented toolkits use well-defined interfaces and data structures, there is potential for simplifying the AD process. Furthermore, derivative computation can be improved by exploiting high-level information about numerical and computational abstractions. However, challenges to the successful use of AD with these toolkits also exist. Among the greatest challenges is balancing the desire to limit the scope of the AD process with the desire to minimize the work required of a user. They discuss their experiences in integrating AD with the PETSc, PVODE, and TAO toolkits and the plans for future research and development in this area.

The Savannah River Site Operations Office of the U.S. Department of Energy is submitting this Delisting Petition to the U.S. Environmental Protection Agency, Region IV. This petition seeks exclusion of certain solid wastes generated at the Savannah River Site near Aiken, South Carolina from the list of Resource Conservation and Recovery Act hazardous wastes contained in 40 CFR 261.24 and 40 CFR 261.31.

The A/M-Area of the Savannah River Site is a known area of solvent release to the subsurface. The Solvent Storage Tank Area is an area of documented dense non-aqueous phase liquids (DNAPL) in the subsurface. June 30, 2000 a remediation using the Dynamic Underground Stripping (DUS) treatment technology commenced. This technology injects steam into the subsurface through a series of injection wells located within the treatment zone. The steam is pulled through the subsurface to an extraction well where it is removed. The heating of the subsurface causes the DNAPL present to be volatilized and removed through the extraction well.

Bimonthly newsletter from DOE's Office of Industrial Technologies to promote the use of energy-efficient industrial systems.

This grant had as its focus (i) to develop chemistry and enzymology to permit the enzymatic synthesis of 2' fluoro modified Sanger sequencing reactions, which would be resistant to fragmentation during MALDI process, (ii) to develop rapid MALDI analyses of DNA sequence polymorphisms using Peptide Nucleic Acid (PNA) DNA analogs in conjunction with solid phase chemistry (iii) to study the fundamental mechanisms occurring in the MALDI analysis of nucleic acids.