None

The shape of the hadronic form factor f{sub +} (q{sup 2}) in the decay D{sup 0} {yields} K{sup -} e{sup +}{nu}{sub e} has been measured in a model independent analysis and compared with theoretical calculations. They use 75 fb{sup -1} of data recorded by the BABAR detector at the PEPII electron-positron collider. The corresponding decay branching fraction, relative to the decay D{sup 0} {yields} K{sup -} {pi}{sup +}, has also been measured to be R{sub D} = BR(D{sup 0} {yields} K{sup -}e{sup +}{nu}{sub e})/BR(D{sup 0} {yields} K{sup -}{pi}{sup +}) = 0.927 {+-} 0.007 {+-} 0.012. From these results, and using the present world average value for BR(D{sup 0} {yields} K{sup -}{pi}{sup +}), the normalization of the form factor at q{sup 2} = 0 is determined to be f{sub +}(0) = 0.727 {+-} 0.007 {+-} 0.005 {+-} 0.007 where the uncertainties are statistical, systematic, and from external inputs, respectively.

Most large-scale applications of high-critical-temperature superconductors will require conductors that can carry large currents in the presence of applied magnetic fields. This report describes progress at Argonne National Laboratory (ANL) in the research and development of practical superconducting components and devices using the Y-Ba-Cu-O and Bi-Pb-Sr-Ca-Cu-O systems. Results are presented in the areas of fabrication of second- and first-generation composite conductors, characterization of their structures and superconducting properties, investigation of grain-boundary current transport and factors that influence it, testing and modeling of the components of a superconducting fault current limiter, and the measurement and modeling of a superconductor's response to a transient such as that in a fault current limiter after a fault.

An approach using positron emission tomography (PET) was developed, validated and used to measure myocardial fatty acid metabolism in patients with inherited forms of heart failure. Abnormalities were correlated with the severity of the clinical illness. The approach developed was also shown to identify abnormalities in myocardial fatty acid metabolism in some patients with acquired forms of heart failure. The PET technique thus permits identification of abnormal fatty acid metabolism and provides an approach to evaluate the efficacy of interventional strategies.

Calculational assessment and experimental verification of certain neutron cross sections that are related to widely needed new medical isotopes. Experiments were performed at the Oregon State University TRIGA Reactor and the High Flux Irradiation Reactor at Oak Ridge National Laboratory.

Long-term processes of cathodoluminescence degradation of thin film phosphors Zn{sub 2}SiO{sub 4}:Ti and Zn{sub 2}GeO{sub 4}:Mn were investigated in a wide range of e-beam energies, current and power densities. The time dependencies describing decreasing of emission intensity have been found. At high-level densities of e-beam irradiation the specific behavior of long-term degradation processes was observed, which is characteristic with rapid degradation at initial stage and slow consequent decrease of intensity. The most probable mechanisms responsible for long-term processes of degradation in investigated phosphors are proposed.

The technologies of fabrication of thin film phosphors based on gallium nitride using rf-magnetron sputtering are developed and structural properties of films are studied. Luminescence and electron spin resonance (ESR) spectra of GaN and GaN-Mn thin films have been studied. The correlation between cathodoluminescence intensity and conductivity of GaN films has been found. The nature of emission centers in GaN and GaN-Mn thin films is discussed as well as mechanism of luminescence in these films is proposed.

High-speed micro-strip micro-channel plate (MCP) x-ray framing cameras are a well established diagnostic for laser plasma experiments. Each frame acquired with these devices requires a separate image, and with most reasonable x-ray optics, a separate line of sight, causing potential parallax problems. Gated image tubes have a single line of sight capability, but the conventional designs have not been effectively extended to the short gating times of the micro-strip-line MCP camera. A hybrid camera combining image tube and micro-strip-line MCP technology has been under development at LLNL in collaboration with UR/LLE, and KENTECH Instruments. The key feature of this single line of sight (SLOS) hybrid image tube is a deflection assembly that continuously divides the electrons from a single photocathode x-ray image into a set of four electron images. Temporal gating of these images is carried out using a microstripline microchannel plate framing camera module positioned at the image plane of the electron tube. Characterization measurements performed using both X-rays from a Manson source and from laser generated plasmas, will be presented. Some implementation improvements will be discussed. The results will be compared to simulations carried out using the charged particle optics code SIMION. Various dissector designs were simulated in …

Our ability to simulate physical processes numerically is constrained by our ability to solve the resulting linear systems, prompting substantial research into the development of multiscale iterative methods capable of solving these linear systems with an optimal amount of effort. Overcoming the limitations of geometric multigrid methods to simple geometries and differential equations, algebraic multigrid methods construct the multigrid hierarchy based only on the given matrix. While this allows for efficient black-box solution of the linear systems associated with discretizations of many elliptic differential equations, it also results in a lack of robustness due to assumptions made on the near-null spaces of these matrices. This paper introduces an extension to algebraic multigrid methods that removes the need to make such assumptions by utilizing an adaptive process. The principles which guide the adaptivity are highlighted, as well as their application to algebraic multigrid solution of certain symmetric positive-definite linear systems.

None

Under the sponsorship of the U.S. DOE and DHS, we have developed a CFD model for simulating flow and dispersion of chemical and biological agents released in the urban environment. Our model, FEM3MP (Chan and Stevens, 2000), is based on solving the three-dimensional, time-dependent, incompressible Navier-Stokes equations on massively parallel computer platforms. The model uses the finite element method for accurate representation of complex building shapes and variable terrain, together with a semi-implicit projection method and modern iterative solvers for efficient time integration (Gresho and Chan, 1998). Physical processes treated include turbulence modeling via the RANS (Reynolds Averaged Navier-Stokes) and LES (Large Eddy Simulation) approaches, atmospheric stability, aerosols, UV radiation decay, surface energy budget, and vegetative canopies, etc. Predictions from our model are continuously being verified and validated against data from wind tunnel (Chan and Stevens, 2000; Chan, et al., 2001) and field experiments (Chan, et al., 2002, 2003; Lee, et al., 2002; Humphreys, et al., 2003; and Calhoun, et al., 2004). Discussed below are several examples to illustrate the use of FEM3MP in simulating flow and dispersion in urban areas and forest canopies, with model results compared against available field measurements.

This study investigates the effects of uncertainty inrockphysics models on estimates of reservoir parameters from jointinversion of seismic AVA and CSEMdata. The reservoir parameters arerelated to electrical resistivity using Archie's law, and to seismicvelocity and density using the Xu-White model. To account for errors inthe rock-physics models, we use two methods to handle uncertainty: (1)the model outputs are random functions with modes or means given by themodel predictions, and (2) the parameters of the models are themselvesrandom variables. Using a stochastic framework and Markov Chain MonteCarlo methods, we obtain estimates of reservoir parameters as well as ofthe uncertainty in the estimates. Synthetic case studies show thatuncertainties in both rock-physics models and their associated parameterscan have significant effects on estimates of reservoir parameters. Ourmethod provides a means of quantifying how the uncertainty in theestimated reservoir parameters increases with increasing uncertainty inthe rock-physics model and in the model parameters. We find that in theexample we present, the estimation of water saturation is relatively lessaffected than is the estimation of clay content and porosity.

The elimination of in-board ohmic heating solenoid is required for the spherical torus (ST) to function as an attractive fusion power plant. An in-board ohmic solenoid, along with the shielding needed for its insulation, increases the size and, hence, the cost of the plant. Here, we investigate using static as well as dynamic codes in ST geometries a solenoid-free start-up concept utilizing a set of out-board poloidal field coils. By using the static code, an optimization of coil positions as well as coil currents was performed to demonstrate that it is indeed possible to create a high quality multi-pole field null region while retaining significant flux (volt-seconds) needed for the subsequent current ramp-up. With the dynamic code that includes the effect of vacuum vessel eddy currents, we then showed that it is possible to maintain a large size field null region for several milliseconds in which sufficient ionization avalanche can develop in the applied toroidal electric field. Under the magnetic geometry typical of a next generation spherical torus experiment, it is shown that the well-known plasma breakdown conditions for conventional ohmic solenoid start-up of E(sub)TB(sub)T/B(sub)P {approx} (0.1-1) kV/m with V(sub)loop {approx} 6 V can be readily met while retaining significant …

Motivated by observations of supersonic argon-ion flow generated by linear helicon-heated plasma devices, a three-dimensional particle-in-cell (PIC) code is used to study whether stationary electrostatic layers form near mechanical apertures intersecting the flow of magnetized plasma. By self-consistently evaluating the temporal evolution of the plasma in the vicinity of the aperture, the PIC simulations characterize the roles of the imposed aperture and applied magnetic field on ion acceleration. The PIC model includes ionization of a background neutral-argon population by thermal and superthermal electrons, the latter found upstream of the aperture. Near the aperture, a transition from a collisional to a collisionless regime occurs. Perturbations of density and potential, with mm wavelengths and consistent with ion acoustic waves, propagate axially. An ion acceleration region of length ~ 200−300 λD,e forms at the location of the aperture and is found to be an electrostatic double layer, with axially-separated regions of net positive and negative charge. Reducing the aperture diameter or increasing its length increases the double layer strength.

Properties of the multi-species electromagnetic Weibel and electrostatic two-stream instabilities are investigated for an intense ion beam propagating through background plasma. Assuming that the background plasma electrons provide complete charge and current neutralization, detailed linear stability properties are calculated within the framework of a macroscopic cold-fluid model for a wide range of system parameters.

Among the many physics processes at TeV hadron colliders, we look most eagerly for those that display signs of the Higgs boson or of new physics. We do so however amid an abundance of processes that proceed via Standard Model (SM) and in particular Quantum Chromodynamics (QCD) interactions, and that are interesting in their own right. Good knowledge of these processes is required to help us distinguish the new from the known. Their theoretical and experimental study teaches us at the same time more about QCD/SM dynamics, and thereby enables us to further improve such distinctions. This is important because it is becoming increasingly clear that the success of finding and exploring Higgs boson physics or other New Physics at the Tevatron and LHC will depend significantly on precise understanding of QCD/SM effects for many observables. To improve predictions and deepen the study of QCD/SM signals and backgrounds was therefore the ambition for our QCD/SM working group at this Les Houches workshop. Members of the working group made significant progress towards this on a number of fronts. A variety of tools were further developed, from methods to perform higher order perturbative calculations or various types of resummation, to improvements in …

A quasi one-dimensional (1-D) steady-state model of the Hall thruster is presented. For the same discharge voltage two operating regimes are possible -- with and without the anode sheath. For given mass flow rate, magnetic field profile and discharge voltage a unique solution can be constructed, assuming that the thruster operates in one of the regimes. However, we show that for a given temperature profile the applied discharge voltage uniquely determines the operating regime: for discharge voltages greater than a certain value, the sheath disappears. That result is obtained over a wide range of incoming neutral velocities, channel lengths and widths, and cathode plane locations. It is also shown that a good correlation between the quasi 1-D model and experimental results can be achieved by selecting an appropriate electron mobility and temperature profile.

A comprehensive experimental laboratory study has been conducted on the thermal performance of reflective insulation systems. The goal of this study was to develop test and evaluation protocols and to obtain thermal performance data on a selected number of idealized and commercial systems containing reflective airspaces for use in analytical models. Steady-state thermal resistance has been measured on 17 different test panels using two guarded hot boxes. Additional instrumentation was installed to measure the temperature of critical locations inside the test panels. The test parameters which have been studied are heat flow direction (horizontal, up, and down), number of airspaces comprising the cavity, airspace effective emittance, airspace aspect ratio, airspace mean temperature and temperature difference, and the thermal resistance of the stud material. Tests have also been performed on similar constructions with mass insulation. Two one-dimensional calculation techniques (ASHRAE and proposed ASTM) have been employed to determine the cavity thermal resistance from the measured test panel results. The measured cavity thermal resistance is compared with literature data which is commonly employed to calculate the thermal resistance of reflective airspace assemblies. A consumer-oriented handbook pertaining to reflective insulation for building and commercial applications has also been prepared as part of this …

The supply of calcium to the developing neonate via milk is an important physiological process. Until recently the mechanism for the enrichment of milk with calcium was thought to be almost entirely mediated via the secretory pathway. However, recent studies suggest that a specific isoform of the plasma membrane calcium ATPase, PMCA2, is the primary mechanism for calcium transport into milk, highlighting a major role for apical calcium transport. We compared the expression of the recently identified secretory calcium ATPase, SPCA2, and SPCA1, in the mouse mammary gland during different stages of development. SPCA2 levels increased over 35 fold during lactation, while SPCA1 increased only a modest two fold. The potential importance of SPCA2 in lactation was also highlighted by its localization to luminal secretory cells of the mammary gland during lactation, while SPCA1 was expressed throughout the cells of the mammary gland. We also observed major differences in the localization of PMCA2 and PMCA1 during lactation. Using the SCp2 mouse mammary epithelial cell 3D culture model, differences in the sub-cellular distribution of PMCA2 and PMCA1 were clear. These studies highlight the likely specific roles of PMCA2 and SPCA2 in lactation, and link the recently characterized SPCA2 calcium pump to …

We summarize the ECL2 workshop on electron cloud clearing, which was held at CERN in early March 2007, and highlight a number of novel ideas for electron cloud suppression, such as continuous clearing electrodes based on enamel, slotted structures, and electrete inserts.

None

We report on molecular desorption of baked stainless steel from irradiation with high energy ions under perpendicular impact. Ion induced molecular desorption has affected the performance of a number of ion accelerators, in which the beam loss typically occurs under small angles. However, experimental parameters can be easier controlled in measurements with perpendicular impact. Desorption coefficients for small angle impact can be estimated from these measurements. The measurements were carried out at Brookhaven's Relativistic Heavy Ion Collider.

Carbon nanotubes offer an outstanding platform for studying molecular transport at nanoscale, and have become promising materials for nanofluidics and membrane technology due to their unique combination of physical, chemical, mechanical, and electronic properties. In particular, both simulations and experiments have proved that fluid flow through carbon nanotubes of nanometer size diameter is exceptionally fast compared to what continuum hydrodynamic theories would predict when applied on this length scale, and also, compared to conventional membranes with pores of similar size, such as zeolites. For a variety of applications such as separation technology, molecular sensing, drug delivery, and biomimetics, selectivity is required together with fast flow. In particular, for water desalination, coupling the enhancement of the water flux with selective ion transport could drastically reduce the cost of brackish and seawater desalting. In this work, we study the ion selectivity of membranes made of aligned double-walled carbon nanotubes with sub-2 nm diameter. Negatively charged groups are introduced at the opening of the carbon nanotubes by oxygen plasma treatment. Reverse osmosis experiments coupled with capillary electrophoresis analysis of permeate and feed show significant anion and cation rejection. Ion exclusion declines by increasing ionic strength (concentration) of the feed and by lowering solution …

We have measured the production of hv {approx} 4.7 keV x-rays from low-density Ti-doped aerogel ({rho} {approx} 3 mg/cc) targets at the OMEGA laser facility (University of Rochester), with the goal of maximizing x-ray output. Forty OMEGA beams ({lambda}{sub L} = 0.351 {micro}m) illuminated the two cylindrical faces of the target with a total power that ranged from 7 to 14 TW. The laser fully ionizes the target (n{sub e}/n{sub crit} {le} 0.1), and a laser-bleaching wave excites, supersonically, the high-Z emitter ions in the sample. Heating in the target was imaged with gated x-ray framing cameras and an x-ray streak camera. Ti K-shell x-ray emission was spectrally resolved with a two-channel crystal spectrometer and also with a set of filtered aluminum x-ray diodes, both instruments provide absolute measurement of the multi-keV x-ray emission. We find between 40 - 260 J of output with 4.67 {le} hv {le} 5.0 keV. Radiation-hydrodynamic calculations predict late time enhancement of the x-ray power due first to axial stagnation of the heating waves, then, ablatively-driven radial compression from the target walls.