The effects of electron-hole interaction on the optical properties of a variety of materials have been calculated using an ab initio method based on solving the Bethe-Salpeter equation. Results on selected semiconductors, insulators, and semiconducting polymers are presented. In the cases of alpha-quartz (SiO2) and poly-phenylene-vinylene, resonant excitonic states qualitatively alter the absorption spectra.

None

None

An instrument combining an array of Cadmium-Zinc-Telluride (CZT) detectors, a NaI scintillator, and two {sup 3}He neutron detectors has been constructed. The instrument uses the CZT array to identify radioactive materials. As an example of this application, the 3 {sigma} Minimum Detectable Activity for the 375 keV peak of {sup 238}Pu is less than 1 gram at a distance of 20 cm for a 100-second counting time. The 2 x 2 NaI scintillator has a dual purpose. First, it is used to supplement the CZT array for identification of high-energy gammas, such as those from {sup 60}Co. Second, the principle use of the NaI scintillator is to help search for radioactive material and to find a suitable measurement location on a suspect package for the CZT-based isotope-identification measurement. This detector also produces energy-corrected exposure-rate data. The {sup 3}He neutron detectors provide an additional confirmation of the presence of some plutonium isotopes. The neutron sensitivity is 90 counts per second at 20 cm from a moderated {sup 252}Cf neutron source.

Article on the solubility of anthracene in ternary methyl tert-butyl ether + alcohol + 2,2,4-trimethylpentane solvent mixtures at 298.15 K.

Article on the solubility of anthracene in ternary methyl tert-butyl ether + alcohol + heptane solvent mixtures at 298.15 K.

The Savannah River Technology Center (SRTC) designed and fabricated tritium target/blanket assemblies which were irradiated for six months at the Los Alamos Neutron Science Center (LANSCE). Cooling water was supplied to the assemblies through 1 inch diameter 304L Stainless Steel (SS) tubing. To attach the 304L SS tubing to the modules a 304L SS to 6061-T6 Aluminum (Al) inertia welded transition joint was used. These SS/Al inertia weld transition joints simulate expected transition joints in the Accelerator Production of Tritium (APT) Target/Blanket where as many as a thousand SS/Al weld transition joints will be used. Materials compatibility between the 304L SS and the 6061-T6 Al in the spallation neutron environment is a major concern as well as the corrosion associated with the cooling water flowing through the piping. The irradiated inertia weld examination will be discussed.

The blackbody radiation left over from the Big Bang has been transformed by the expansion of the Universe into the nearly isotropic 2.73 K Cosmic Microwave Background. Tiny inhomogeneities in the early Universe left their imprint on the microwave background in the form of small anisotropies in its temperature. These anisotropies contain information about basic cosmological parameters, particularly the total energy density and curvature of the universe. Here we report the first images of resolved structure in the microwave background anisotropies over a significant part of the sky. Maps at four frequencies clearly distinguish the microwave background from foreground emission. We compute the angular power spectrum of the microwave background, and find a peak at Legendre multipole {ell}{sub peak} = (197 {+-} 6), with an amplitude DT{sub 200} = (69 {+-} 8){mu}K. This is consistent with that expected for cold dark matter models in a flat (euclidean) Universe, as favored by standard inflationary scenarios.

The Idaho Nuclear Technology and Engineering Center (INTEC) safety analysis units at the Idaho National Engineering and Environmental Laboratory (INEEL) are in the process of implementing the recently issued INEEL Safety Analyst Training Standard (STD-1107). Safety analyst training and qualifications are integral to the development and maintenance of core safety analysis capabilities. The INEEL Safety Analyst Training Standard (STD-1107) was developed directly from EFCOG Training Subgroup draft safety analyst training plan template, but has been adapted to the needs and requirements of the INEEL safety analysis community. The implementation of this Safety Analyst Training Standard is part of the Integrated Safety Management System (ISMS) Phase II Implementation currently underway at the INEEL. The objective of this paper is to discuss (1) the INEEL Safety Analyst Training Standard, (2) the development of the safety analyst individual training plans, (3) the implementation issues encountered during this initial phase of implementation, (4) the solutions developed, and (5) the implementation activities remaining to be completed.

High-temperature creep measurements combined with microstructural investigations can be used to elucidate deformation mechanisms that can be related to the diffusion kinetics and defect chemistry of the minority species. This paper will review the theoretical basis for this correlation and illustrate it with examples from some important electronic ceramics having a perovskite structure. Recent results on BaTiO{sub 3}, (La{sub 1{minus}x}Sr){sub 1{minus}y}MnO{sub 3+{delta}}, YBa{sub 2}Cu{sub 3}O{sub x}, Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub x}, (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} and Sr(Fe,Co){sub 1.5}O{sub x} will be presented.

As Linux clusters have matured as platforms for low-cost, high-performance parallel computing, software packages to provide many key services have emerged, especially in areas such as message passing and net-working. One area devoid of support, however, has been parallel file systems, which are critical for high-performance I/O on such clusters. We have developed a parallel file system for Linux clusters, called the Parallel Virtual File System (PVFS). PVFS is intended both as a high-performance parallel file system that anyone can download and use and as a tool for pursuing further research in parallel I/O and parallel file systems for Linux clusters. In this paper, we describe the design and implementation of PVFS and present performance results on the Chiba City cluster at Argonne. We provide performance results for a workload of concurrent reads and writes for various numbers of compute nodes, I/O nodes, and I/O request sizes. We also present performance results for MPI-IO on PVFS, both for a concurrent read/write workload and for the BTIO benchmark. We compare the I/O performance when using a Myrinet network versus a fast-ethernet network for I/O-related communication in PVFS. We obtained read and write bandwidths as high as 700 Mbytes/sec with Myrinet and …

Polycrystalline Sr{sub 3}Mn{sub 2}O{sub 6.54} and Sr{sub 3}Mn{sub 2}O{sub 7} layered manganites were studied at room temperature using Raman spectroscopy. While the phonon spectrum of the stoichiometric Sr{sub 3}Mn{sub 2}O{sub 7} sample is consistent with the group theoretical analysis for the 14/mm structure, three additional modes are observed in the phonon spectrum of the oxygen deficient Sr{sub 3}Mn{sub 2}O{sub 6.54} sample. Based on an analysis of the temperature dependence of the Raman spectrum of Sr{sub 3}Mn{sub 2}O{sub 6.54} and a comparison with the Raman spectrum of LaSr{sub 2}Mn{sub 2}O{sub 7}, the authors conclude that the extra modes should be viewed as disorder induced Raman scattering.

Scientists from the Lawrence Berkeley National Laboratory (Berkeley Lab) have generated 300-femtosecond pulses of bend-magnet synchrotron radiation at the Advanced Light Source (ALS) with the aid of a laser ''time-slicing'' technique. This technique allows an ultrashort portion of an electron bunch in the ALS storage ring to be spatially displaced in such a way that the synchrotron radiation from the displaced portion can then be collected separately. Their proof-of-principle experiment demonstrates that this technique is a viable one for producing ultra-short pulses of x-rays. An ALS bend-magnet beamline is already under construction that will be dedicated to time-resolved x-ray diffraction, EXAFS, and other techniques capable of probing the long-range and local structure of matter on a femtosecond time scale. A proposed undulator beamline based on the same technique would further enhance the flux and brightness by orders of magnitude.

Welding plays an important role in the economical reuse and reclamation of used and failed nickel base superalloy blades. Previous research on microstructure development during laser beam welding of a single crystal CMSX4 alloy [Ref. l] showed non-equilibrium y/y{prime} microstructure development. In addition, the y{prime} precipitates were found to be irregular in shape and atom probe field ion microscopy illustrated the presence of diffusional concentration profile within the y phase in the as welded condition. To understand the above microstructure characteristics, y{prime} precipitation from y phase was investigated during continuous cooling from solutionizing temperature.

Sandia National Laboratories has been studying Energy Storage Systems since the late 1970s. Sandia started by applying their defense program battery experience to larger stationary systems, eventually joining in the formation of the Utility Battery Group which has since evolved into the Energy Storage Association. Sandia's role, as a Department of Energy funded program is to look ahead at emerging technologies, perform early R and D and identify applications for Energy Storage Systems that offer significant benefit to the nation's electricity providers and users. In order to identify applications of energy storage, a two-phase Opportunities Analysis was conceptualized in FY94. Phase 1 of the project was completed and published in 1995 (SAND94-2605). Phase 2 of the project is an extension of Phase 1 to reexamine the identified applications in the dynamic environment of today. In a preliminary assessment of national benefits, SNL estimated that generation and transmission applications of storage could represent $17.2B in national benefits. In Phase 1 of the Opportunities Analysis, the T and D benefits were found to be significantly higher than previous estimates Phase 2 of the study, which began in late 1998, includes a refinement of the technical and economic understanding of the role of …

Vertical cavity surface emitting lasers (VCSELs) which operate in multiple transverse optical modes have been rapidly adopted into present data communication applications which rely on multi-mode optical fiber. However, operation only in the fundamental mode is required for free space interconnects and numerous other emerging VCSEL applications. Two device design strategies for obtaining single mode lasing in VCSELs based on mode selective loss or mode selective gain are reviewed and compared. Mode discrimination is attained with the use of a thick tapered oxide aperture positioned at a longitudinal field null. Mode selective gain is achieved by defining a gain aperture within the VCSEL active region to preferentially support the fundamental mode. VCSELs which exhibit greater than 3 mW of single mode output power at 850 nm with mode suppression ratio greater than 30 dB are reported.

A flywheel is an electromechanical storage system in which energy is stored in the kinetic energy of a rotating mass. Flywheel systems under development include those with steel flywheel rotors and resin/glass or resin/carbon-fiber composite rotors. The mechanics of energy storage in a flywheel system are common to both steel- and composite-rotor flywheels. In both systems, the momentum of the rotating rotor stores energy. The rotor contains a motor/generator that converts energy between electrical and mechanical forms. In both types of systems, the rotor operates in a vacuum and spins on bearings to reduce friction and increase efficiency. Steel-rotor systems rely mostly on the mass of the rotor to store energy while composite flywheels rely mostly on speed. During charging, an electric current flows through the motor increasing the speed of the flywheel. During discharge, the generator produces current flow out of the system slowing the wheel down. The basic characteristics of a Flywheel system are shown. Steel flywheel systems are currently being marketed in the US and Germany and can be connected in parallel to provide greater power if required. Sizes range from 40kW to 1.6MW for times of 5--120 seconds. At this time sales are limited but growing. …

A Mach-Zehnder interferometer was used for analysis of pressure waves generated by ultrashort laser pulse ablation of water. It was found that the shock wave generated by plasma formation rapidly decays to an acoustic wave. Both experimental and theoretical studies demonstrated that the energy transfer to the mechanical shock was less than 1%.

This paper examines the modeling accuracy of finite element interpolation, kriging, and polynomial regression used in conjunction with the Progressive Lattice Sampling (PLS) incremental design-of-experiments approach. PLS is a paradigm for sampling a deterministic hypercubic parameter space by placing and incrementally adding samples in a manner intended to maximally reduce lack of knowledge in the parameter space. When combined with suitable interpolation methods, PLS is a formulation for progressive construction of response surface approximations (RSA) in which the RSA are efficiently upgradable, and upon upgrading, offer convergence information essential in estimating error introduced by the use of RSA in the problem. The three interpolation methods tried here are examined for performance in replicating an analytic test function as measured by several different indicators. The process described here provides a framework for future studies using other interpolation schemes, test functions, and measures of approximation quality.

Rotorcraft structures do not readily lend themselves to quantifiable inspection methods due to airframe construction techniques. Periodic visual inspections are a common practice for detecting corrosion. Unfortunately, when the telltale signs of corrosion appear visually, extensive repair or refurbishment is required. There is a need to nondestructively evaluate airframe structures in order to recognize and quantify corrosion before visual indications are present. Nondestructive evaluations of rotorcraft airframes face inherent problems different from those of the fixed wing industry. Most rotorcraft lap joints are very narrow, contain raised fastener heads, may possess distortion, and consist of thinner gage materials ({approximately}0.012--0.125 inches). In addition the structures involve stack-ups of two and three layers of thin gage skins that are separated by sealant of varying thickness. Industry lacks the necessary data techniques, and experience to adequately perform routine corrosion inspection of rotorcraft. In order to address these problems, a program is currently underway to validate the use of eddy current inspection on specific rotorcraft lap joints. Probability of detection (POD) specimens have been produced that simulate two lap joint configurations on a model TH-57/206 helicopter. The FAA's Airworthiness Assurance Center (AANC) at Sandia Labs and Bell Helicopter have applied single and dual frequency …

The authors give a brief account of recent theoretical developments in prompt photon production.

Electrical conductivities of fluid oxygen were measured between 30 and 80 GPa at a few 1000 K. These conditions were achieved with a reverberating shock wave technique. The measured conductivities were several orders of magnitude lower than measured previously on the single shock Hugoniot because of lower temperatures achieved under shock reverberation. Extrapolation of these data suggests that the minimum metallic conductivity of a metal will be reached near 100 GPa.

This work presents a method of finding near global optima to minimum-time trajectory generation problem for systems that would be linear if it were not for the presence of Coloumb friction. The required final state of the system is assumed to be maintainable by the system, and the input bounds are assumed to be large enough so that they can overcome the maximum static Coloumb friction force. Other than the previous work for generating minimum-time trajectories for non redundant robotic manipulators for which the path in joint space is already specified, this work represents, to the best of the authors' knowledge, the first approach for generating near global optima for minimum-time problems involving a nonlinear class of dynamic systems. The reason the optima generated are near global optima instead of exactly global optima is due to a discrete-time approximation of the system (which is usually used anyway to simulate such a system numerically). The method closely resembles previous methods for generating minimum-time trajectories for linear systems, where the core operation is the solution of a Phase I linear programming problem. For the nonlinear systems considered herein, the core operation is instead the solution of a mixed integer linear programming problem.

The success of nonrigid motion analysis using physical finite element model is dependent on the mesh that characterizes the object's geometric structure. We suggest a deformable mesh adapted to the natural features of images. The adaptive mesh requires much fewer number of nodes than the fixed mesh which was used in our previous work. We demonstrate the higher efficiency of the adaptive mesh in the context of estimating burn scar elasticity relative to normal skin elasticity using the observed 2D image sequence. Our results show that the scar assessment method based on the physical model using natural feature adaptive mesh can be applied to images which do not have artificial markers.