CKM mixing between third family quarks and a possible fourth family is constrained by global fits to the precision electroweak data. The dominant constraint is from nondecoupling oblique corrections rather than the vertex correction to Z {yields} {bar b}b used in previous analyses. The possibility of large mixing suggested by some recent analyses of FCNC processes is excluded, but 3-4 mixing of the same order as the Cabbibo mixing of the first two families is allowed.

Partial ytterbium f-orbital occupancy (i.e., intermediate valence) and open-shell singlet formation are established for a variety of bipyridine and diazabutadiene adducts with decamethylytterbocene, (C5Me5)2Yb, abbreviated as Cp*2Yb. Data used to support this claim include ytterbium valence measurements using Yb LIII-edge X-ray absorption near-edge structure spectroscopy, magnetic susceptibility, and complete active space self-consistent field (CASSCF) multiconfigurational calculations, as well as structural measurements compared to density functional theory calculations. The CASSCF calculations indicate that the intermediate valence is the result of a multiconfigurational ground-state wave function that has both an open-shell singlet f13(?*)1, where pi* is the lowest unoccupied molecular orbital of the bipyridine or dpiazabutadiene ligands, and a closed-shell singlet f14 component. A number of other competing theories for the unusual magnetism in these materials are ruled out by the lack of temperature dependence of the measured intermediate valence. These results have implications for understanding chemical bonding not only in organolanthanide complexes but also for f-element chemistry in general, as well as understanding magnetic interactions in nanoparticles and devices.

Design of Experiments (DoE) were developed and performed in an effort to discover and resolve the causes of three different manufacturing issues; large panel voids after Hot Air Solder Leveling (HASL), cable hole locations out of tolerance after lamination and delamination/solder wicking around flat flex cable circuit lands after HASL. Results from a first DoE indicated large panel voids could be eliminated by removing the pre-HASL cleaning. It also revealed eliminating the pre-HASL bake would not be detrimental when using a hard press pad lamination stackup. A second DoE indicated a reduction in hard press pad stackup lamination pressure reduced panel stretch in the y axis approximately 70%. A third DoE illustrated increasing the pre-HASL bake temperature could reduce delamination/solder wicking when using a soft press pad lamination stackup.

Tokamaks are sensitive to deviations from axisymmetry as small as δB=B0 ~ 10-4. These non-axisymmetric perturbations greatly modify plasma confinement and performance by either destroying magnetic surfaces with subsequent locking or deforming magnetic surfaces with associated non-ambipolar transport. The Ideal Perturbed Equilibrium Code (IPEC) calculates ideal perturbed equilibria and provides important basis for understanding the sensitivity of tokamak plasmas to perturbations. IPEC calculations indicate that the ideal plasma response, or equiva- lently the effect by ideally perturbed plasma currents, is essential to explain locking experiments on National Spherical Torus eXperiment (NSTX) and DIII-D. The ideal plasma response is also important for Neoclassical Toroidal Viscosity (NTV) in non-ambipolar transport. The consistency between NTV theory and magnetic braking experiments on NSTX and DIII-D can be improved when the variation in the field strength in IPEC is coupled with generalized NTV theory. These plasma response effects will be compared with the previous vacuum superpositions to illustrate the importance. However, plasma response based on ideal perturbed equilibria is still not suffciently accurate to predict the details of NTV transport, and can be inconsistent when currents associated with a toroidal torque become comparable to ideal perturbed currents.

The CeTIn_5 superconductors (T=Co, Rh, or Ir) have generated great interest due to their relatively high transition temperatures, non-Fermi liquid behavior, and their proximity to antiferromagnetic order and quantum critical points. In contrast to small changes with the T-species, electron doping in CeT(In_1-x M_x)_5 with $M$=Sn and hole doping with Cd or Hg have a dramatic effect on the electronic properties at very low concentrations. The present work reports local structure measurements usingthe extended x-ray absorption fine-structure (EXAFS) technique that address the substituent atom distribution as a function of T, M, and x, in the vicinity of the superconducting phase. Together with previous measurements for M=Sn, the proportion of the $M$ atom residing on the In(1) site, f_\textrm In(1), increases in the order M=Cd, Sn, and Hg, ranging from about 40\percent to 70percent, showing a strong preference for each of these substituents to occupy the In(1) site (random occupation = 20percent). In addition, f_In(1) ranges from 70percent to 100percent for M=Hg in the order T=Co,Rh, and Ir. These fractions track the changes in the atomic radii of the various species, and help explain the sharp dependence of $T_c$ on substituting into the In site. However, it is difficult to reconcile …

The objectives of this paper are: (1) validate H{sub 2} FC vehicles and infrastructure in parallel; (2) identify current status and evolution of the technology; (3) objectively assess progress toward technology readiness; and (4) provide feedback to H{sub 2} research and development.

We report an analysis of {tau}{sup -} decaying into {omega}{pi}{sup -} {nu}{sub {tau}} with {omega} {yields} {pi}{sup +}{pi}{sup -}{pi}{sup 0} using a data sample containing nearly 320 million {tau} pairs collected with the BABAR detector at the PEP-II B-Factory. We find no evidence for second-class currents and we set an upper limit of 0.69% at 90% confidence level for the fraction of second-class currents in this decay mode.

A high contrast 12.6 keV Kr K{alpha} source has been demonstrated on the petawatt-class Titan laser facility. The contrast ratio (K{alpha} to continuum) is 65, with a competitive ultra short pulse laser to x-ray conversion efficiency of 10{sup -5}. Filtered shadowgraphy indicates that the Kr K{alpha} and K{beta} x-rays are emitted from a roughly 1 x 2 mm emission volume, making this source suitable for area backlighting and scattering. Spectral calculations indicate a typical bulk electron temperature of 50-70 eV (i.e. mean ionization state 13-16), based on the observed ratio of K{alpha} to K{beta}. Kr gas jets provide a debris-free high energy K{alpha} source for time-resolved diagnosis of dense matter.

Several approaches to ASP performance can be contemplated. Perhaps the ideal would be a full cost/benefit analysis (which is probably utterly infeasible). Another approach would be a test-based figure-of-merit (FOM), this approach has the virtue of being quantitative and the challenge that each customer and application would be characterized by a different FOM. The alternative proposed here is an approach that uses information about the limits of detection of real instruments to support informed judgments.

The Advanced Telecommunications Computing Architecture is a new industry open standard for electronics instrument modules and shelves being evaluated for the International Linear Collider (ILC). It is the first industrial standard designed for High Availability (HA). ILC availability simulations have shown clearly that the capabilities of ATCA are needed in order to achieve acceptable integrated luminosity. The ATCA architecture looks attractive for beam instruments and detector applications as well. This paper provides an overview of ongoing R&D including application of HA principles to power electronics systems.

None

None

None

The authors designed, implemented and tested cryogenic RF filters with zero DC resistance, based on wires with a superconducting core inside a resistive sheath. The superconducting core allows low frequency currents to pass with negligible dissipation. Signals above the cutoff frequency are dissipated in the resistive part due to their small skin depth. The filters consist of twisted wire pairs shielded with copper tape. Above approximately 1 GHz, the attenuation is exponential in {radical}{omega}, as typical for skin depth based RF filters. By using additional capacitors of 10 nF per line, an attenuation of at least 45 dB above 10 MHz can be obtained. Thus, one single filter stage kept at mixing chamber temperature in a dilution refrigerator is sufficient to attenuate room temperature black body radiation to levels corresponding to 10 mK above about 10 MHz.

The major accomplishment of this project is the production of CafLib, an 'object-oriented' parallel numerical library written in Co-Array Fortran. CafLib contains distributed objects such as block vectors and block matrices along with procedures, attached to each object, that perform basic linear algebra operations such as matrix multiplication, matrix transpose and LU decomposition. It also contains constructors and destructors for each object that hide the details of data decomposition from the programmer, and it contains collective operations that allow the programmer to calculate global reductions, such as global sums, global minima and global maxima, as well as vector and matrix norms of several kinds. CafLib is designed to be extensible in such a way that programmers can define distributed grid and field objects, based on vector and matrix objects from the library, for finite difference algorithms to solve partial differential equations. A very important extra benefit that resulted from the project is the inclusion of the co-array programming model in the next Fortran standard called Fortran 2008. It is the first parallel programming model ever included as a standard part of the language. Co-arrays will be a supported feature in all Fortran compilers, and the portability provided by standardization will …

We derive a duality relation between one-loop integrals and phase-space integrals emerging from them through single cuts. The duality relation is realized by a modification of the customary + i0 prescription of the Feynman propagators. The new prescription regularizing the propagators, which we write in a Lorentz covariant form, compensates for the absence of multiple cut contributions that appear in the Feynman Tree Theorem. The duality relation can be applied to generic one-loop quantities in any relativistic, local and unitary field theories. It is suitable for applications to the analytical calculation of one-loop scattering amplitudes, and to the numerical evaluation of cross-sections at next-to-leading order.

A framework for high level accelerator application software is being developed for the Linac Coherent Light Source (LCLS). The framework is based on plug-in technology developed by an open source project, Eclipse. Many existing functionalities provided by Eclipse are available to high-level applications written within this framework. The framework also contains static data storage configuration and dynamic data connectivity. Because the framework is Eclipse-based, it is highly compatible with any other Eclipse plug-ins. The entire infrastructure of the software framework will be presented. Planned applications and plug-ins based on the framework are also presented.

We report on an improved measurement of the Cabibbo-Kobayashi-Maskawa CP-violating phase {gamma} through a Dalitz plot analysis of neutral D meson decays to K{sub s}{sup 0}{pi}{sup +}{pi}{sup -} and K{sub s}{sup 0}K{sup +}K{sup -} produced in the processes B{sup {-+}} {yields} DK{sup {-+}}, B{sup {-+}} {yields} D* K{sup {-+}} with D* {yields} D{pi}{sup 0}, D{gamma}, and B{sup {-+}} {yields} DK*{sup {-+}} with K8{sup {-+}} {yields} K{sub S}{sup 0}{pi}{sup {-+}}. Using a sample of 383 million B{bar B} pairs collected by the BABAR detector, we measure {gamma} = (76 {+-} 22 {+-} 5{+-} 5){sup o} (mod 180{sup o}), where the first error is statistical, the second is the experimental systematic uncertainty and the third reflects the uncertainty on the description of the Dalitz plot distributions. The corresponding two standard deviation region is 29{sup o} < {gamma} < 122{sup o}. This result has a significance of direct CP violation ({gamma} {ne} 0) of 3.0 standard deviations.

Access to previous results is of paramount importance in the scientific process. Recent progress in information management focuses on building e-infrastructures for the optimization of the research workflow, through both policy-driven and user-pulled dynamics. For decades, High-Energy Physics (HEP) has pioneered innovative solutions in the field of information management and dissemination. In light of a transforming information environment, it is important to assess the current usage of information resources by researchers and HEP provides a unique test-bed for this assessment. A survey of about 10% of practitioners in the field reveals usage trends and information needs. Community-based services, such as the pioneering arXiv and SPIRES systems, largely answer the need of the scientists, with a limited but increasing fraction of younger users relying on Google. Commercial services offered by publishers or database vendors are essentially unused in the field. The survey offers an insight into the most important features that users require to optimize their research workflow. These results inform the future evolution of information management in HEP and, as these researchers are traditionally 'early adopters' of innovation in scholarly communication, can inspire developments of disciplinary repositories serving other communities.

None

The authors present measurements of branching fractions for five B-meson decays to two-body charmless final states. The data, collected with the BABAR detector at the Stanford Linear Accelerator Center, represent 459 million B{bar B} pairs. The results for branching fractions are, in units of 10{sup -6} (upper limits at 90% C.L.): {Beta}(B{sup +} {yields} {eta}{rho}{sup +}) = 9.9 {+-} 1.2 {+-} 0.8, {Beta}(B{sup 0} {yields} {eta}{prime}{eta}) = 0.5 {+-} 0.4 {+-} 0.1 (< 1.2), {Beta}(B{sup 0} {yields} {eta}{pi}{sup 0}) = 0.9 {+-} 0.4 {+-} 0.1 (< 1.5), {Beta}(B{sup 0} {yields} {eta}{prime}{pi}{sup 0}) = 0.9 {+-} 0.4 {+-} 0.1 (< 1.5), and {Beta}(B{sup 0}{sup 0} {yields} {omega}{pi}{sup 0}) = {eta}{rho}{sup +} mode, they measure the charge asymmetry {Alpha}{sub ch} (B{sup +} {yields} {eta}{rho}{sup +}) = 0.13 {+-} 0.11 {+-} 0.02.

This document focusses on green power purchasing in the Federal sector.

Petascale systems are in existence today and will become common in the next few years. Such systems are inevitably very complex, highly distributed and heterogeneous. Monitoring a petascale system in real-time and understanding its status at any given moment without impacting its performance is a highly intricate task. Common approaches and off-the-shelf tools are either unusable, do not scale, or severely impact the performance of the monitored servers. This paper describes unobtrusive monitoring software developed at Stanford Linear Accelerator Center (SLAC) for a highly distributed petascale production data set. The paper describes the employed solutions, the lessons learned, the problems still to be addressed, and explains how the system can be reused elsewhere.

None