The discovery that ultra-intense laser pulses (I > 10{sup 18} W/cm{sup 2}) can produce short pulse, high energy proton beams has renewed interest in the fundamental mechanisms that govern particle acceleration from laser-solid interactions. Experiments have shown that protons present as hydrocarbon contaminants on laser targets can be accelerated up to energies > 50 MeV. Different theoretical models that explain the observed results have been proposed. One model describes a front-surface acceleration mechanism based on the ponderomotive potential of the laser pulse. At high intensities (I > 10{sup 18} W/cm{sup 2}), the quiver energy of an electron oscillating in the electric field of the laser pulse exceeds the electron rest mass, requiring the consideration of relativistic effects. The relativistically correct ponderomotive potential is given by U{sub p} = ([1 + I{lambda}{sup 2}/1.3 x 10{sup 18}]{sup 1/2} - 1) m{sub o}c{sup 2}, where I{lambda}{sup 2} is the irradiance in W{micro}m{sup 2}/cm{sup 2} and m{sub o}c{sup 2} is the electron rest mass.At laser irradiance of I{lambda}{sup 2} {approx} 10{sup 20} W{micro}m{sup 2}/cm{sup 2}, the ponderomotive potential can be of order several MeV. A few recent experiments--discussed in Chapter 3 of this thesis--consider this ponderomotive potential sufficiently strong to accelerate protons from the …

The MINOS experiment was designed to measure neutrino oscillation parameters with muon neutrinos. It achieves this by measuring the neutrino energy spectrum and flavor composition of the man-made NuMI neutrino beam 1km after the beam is formed and again after 735 km. By comparing the two spectra it is possible to measure the oscillation parameters. The NuMI beam is made up of 7.0%$\bar{v}$_μ, which can be separated from the v_μ because the MINOS detectors are magnetized. This makes it possible to study $\bar{v}$_μ oscillations separately from those of muon neutrinos, and thereby test CPT invariance in the neutrino sector by determining the $\bar{v}$_μ oscillation parameters and comparing them with those for v_μ, although any unknown physics of the antineutrino would appear as a difference in oscillation parameters. Such a test has not been performed with beam $\bar{v}$_μ before. It is also possible to produce an almost pure $\bar{v}$_μ beam by reversing the current through the magnetic focusing horns of the NuMI beamline, thereby focusing negatively, instead of positively charged particles. This thesis describes the analysis of the 7% $\bar{v}$_μ component of the forward horn current NuMI beam. The $\bar{v}$_μ of a data sample of 3.2 x 10{sup 20} protons on …

The one- and two-dimensional Ginzburg-Landau equations are numerically integrated in a slab geometry, which is appropriate for comparison to experimental work done on films. When two-dimensional variations become energetically favorable, a vortex is found to nucleate and move to the center of the film with the Gibbs free energy decreasing during the process. An important process by which the energy is lowered during this nucleation procedure is found to be the savings in condensation energy arising from the shrinking size of the vortex core as it moves to the center of the film. The solutions of the Ginzburg-Landau equations are used to explain anomalies observed experimentally in the tunneling characteristics of thin films of PbIn. Excellent agreement between theory and experiment is found with the Ginzburg-Landau equations correctly predicting the field at which flux would first enter the films. We then use the Clem model of an isolated vortex to model vortex nucleation and dynamics under the influence of a transport current. The entry fields predicted by the model are found to be off by almost a factor of two but have the advantage of requiring simple computer programs for their solution, while the Ginzburg-Landau solutions require substantially more numerical …

The D0 detector underwent a major upgrade to maximize its ability to fully exploit Run II at the Fermilab Tevatron, the world's highest energy collider. The upgrade included a completely new central tracking system with an outer scintillating fiber tracker and an inner silicon vertex detector all within a 2T superconducting solenoid. This thesis describes the development of high level trigger algorithms including vertexing, impact parameter significance and invariant mass, that utilize tracks from these detectors. One of the main physics goals of Run II is the observation of B{sub s} oscillations. This measurement, which cannot be performed at the B factories, will significantly constrain the ''unitarity triangle'' associated with Cp violation and so probe the Standard Model of particle physics. Furthermore this is an interesting measurement as the study of mixing in meson systems has a long history for revealing new physics. The second part of this thesis presents a study of the hadronic decay B{sub s} {yields} D{sub s}{pi}. This important mode provides the best proper time resolution for B{sub s} mixing and is reconstructed for the first time at D0. Projections on the sensitivity to B{sub s} oscillations are then presented.

The absolute branching fractions for the decays D{sub s}{sup -} {yields} {ell}{sup -}{bar {nu}}{sub {ell}} ({ell} = e, {mu}, or {tau}) are measured using a data sample corresponding to an integrated luminosity of 521 fb{sup -1} collected at center of mass energies near 10.58 GeV with the BABAR detector at the PEPII e{sup +}e{sup -} collider at SLAC. The number of D{sub s}{sup -} mesons is determined by reconstructing the recoiling system DKX{gamma} in events of the type e{sup +}e{sup -} {yields} DKXD*{sub s}{sup -}, where D*{sub s}{sup -} {yields} D{sub s}{sup -} {gamma} and X represents additional pions from fragmentation. The D{sub s}{sup -} {yields} {ell}{sup -}{nu}{sub {ell}} events are detected by full or partial reconstruction of the recoiling system DKX{gamma}{ell}. The following results are obtained: {Beta}(D{sub s}{sup -} {yields} {mu}{sup -}{nu}) = (6.02 {+-} 0.38 {+-} 0.34) x 10{sup -3}, {Beta}(D{sub s}{sup -} {yields} {tau}{sup -}{nu}) = (5.00 {+-} 0.35 {+-} 0.49) x 10{sup -2}, and B(D{sub s}{sup -} {yields} e{sup -}{nu}) < 2.8 x 10{sup -4} at 90% C.L., where the first uncertainty is statistical and the second is systematic. The branching fraction measurements are combined to determine the D{sub s}{sup -} decay constant f{sub D{sub s}} …

This thesis presents the measurement of energy dependence of the neutrino-nucleon inclusive charged current cross section on an isoscalar target in the range 3-50 GeV for neutrinos and 5-50 GeV energy range for antineutrinos. The data set was collected with the MINOS Near Detector using the wide band NuMI beam at Fermilab. The size of the charged current sample is 1.94 x 10{sup 6} neutrino events and 1.60 x 10{sup 5} antineutrino events. The flux has been extracted using a low hadronic energy sub-sample of the charged current events. The energy dependence of the cross section is obtained by dividing the charged current sample with the extracted flux. The neutrino and antineutrino cross section exhibits a linear dependence on energy at high energy but shows deviations from linear behavior at low energy. We also present a measurement of the ratio of antineutrino to neutrino inclusive cross section.

In 1988 Nielsen started work to measure the spatial variability of the mass flux vector being transported in a porous medium. To measure the spatial variability of the mass flux vector, the spatial variability of its components(velocity, concentration) must be measured. Nielsen was successful in measuring the pore level concentration at many different pores and in verifying the assumption that a nonuniform concentration field exists within the mixing zone between two miscible fluids. However, Nielsen was unable to conduct the necessary pore level velocity measurements needed. Nielsen`s work is being continued and a probe is being developed that will measure both velocity and concentration components at pore level. The probe is essentially the same probe used to make the pore level concentration measurements with added capabilities needed to make the velocity measurements. This probe has several design variables, dealing primarily with the velocity component, that need further investigation. The research presented in this thesis investigates these parameters by performing experiments in a capillary tube. The tube is a controlled system where the velocity of the fluid can be determined from the volumetric flow rate using Poiseuille`s solution for viscous flow. Also, a statistically based relationship between the velocity measured with …

None

An extensive experimental program to measure the spin structure of the nucleus is underway in Hall B at Jefferson Lab using a polarized electron beam incident on a polarized target. Spin degrees of freedom offer the possibility to test, in an independent way, existing models of resonance electro-production. The present analysis selects the Delta{sup +} (1232) in the exclusive channel {rvec p}({rvec e}, e'p)pi{sup 0} from data of the EG1 run period, taken in the Fall of 1998, to extract single and double asymmetries in a Q{sup 2} range from 0.5 to 1.5 GeV{sup 2}/c{sup 2}. Results of the asymmetries are presented as a function of momentum transfer Q{sup 2}. A comparison with the Effective Lagrangian Model by R. Davidson and N. Mukhopadhyay, the unitary isobar model MAID, and the dynamic model by Sato and Lee was performed. The data were found to be generally in good agreement with the models and a x{sup 2} comparison preferred the Sato-Lee model, which is tailored for the Delta (1232) photo- and electro-production. The present results are the first measurement of asymmetries for the exclusive reaction {rvec p}({rvec e}, e'p)pi{sup 0} and will provide new constraints for the models.

None

None

There has been an increasing interest in probabilistic modeling of hydrogeologic systems. The classical approach to groundwater modeling has been deterministic in nature, where individual layers and formations are assumed to be uniformly homogeneous. Even in the case of complex heterogeneous systems, the heterogeneities describe the differences in parameter values between various layers, but not within any individual layer. In a deterministic model a single-number is assigned to each hydrogeologic parameter, given a particular scale of interest. However, physically there is no such entity as a truly uniform and homogeneous unit. Single-number representations or deterministic predictions are subject to uncertainties. The approach used in this work models such uncertainties with probabilistic parameters. The resulting statistical distributions of output variables are analyzed. A numerical algorithm, based on axiomatic principles of probability theory, performs arithmetic operations between probability distributions. Two subroutines are developed from the algorithm and incorporated into the computer program TERZAGI, which solves groundwater flow problems in saturated, multi-dimensional systems. The probabilistic computer program is given the name, PROGRES. The algorithm has been applied to study the following problems: one-dimensional flow through homogeneous media, steady-state and transient flow conditions, one-dimensional flow through heterogeneous media, steady-state and transient flow conditions, and …

The differential cross section for charge-exchange scattering of negative pions by hydrogen has been observed at 230, 260, 290, 317, and 371 Mev. The reaction was observed by detecting one gamma ray from the {pi}{sup 0} decay with a scintillation-counter telescope.

We present the search for the lepton flavour violating decay {tau} {yields} lK{sup 0}{sub s} with the BaBar experiment data. This process and many other lepton flavour violating {tau} decays, like {tau} {yields} {mu}{gamma} and {tau} {yields} lll, are one of the most promising channel to search for evidence of new physics. According to the Standard Model and the neutrino mixing parameters, branching fractions are estimated well below 10{sup -14}, but many models of new physics allow for branching fractions values close to the present experimental sensitivity. This analysis is based on a data sample of 469fb{sup -1} collected by BABAR detector at the PEP-II storage ring from 1999 to 2007, equivalent to 431 millions of {tau} pairs. the BABAR experiment, initially designed for studying CP violation in B mesons, has demonstrated to be one of the most suitable environments for studying {tau} decays. The tracking system, the calorimeter and the particle identification of BABAR, together with the knowledge of the {tau} initial energy, allow an extremely powerful rejection of background events that, for this analysis, is better than 10{sup -9}. Being {tau} {yields} lK{sup 0}{sub s} a decay mode without neutrinos, the signal {tau} decay can be fully reconstructed. …

None

Lasershot peening is an emerging modern process that impresses a compressive stress into the surfaces of metals, improving their operational lifetime. Almost everyone is familiar with taking a strip of metal or a wire and bending it multiple times until it breaks. In this situation, when the metal is bent, the surface of outer radius is stretched into a tensile state. Under tension, any flaw or micro-crack will grow in size with each bending of the metal until the crack grows through the entire strip, breaking it into two pieces. Flexure of metal components occurs in most applications. The teeth of a transmission gear flex as they deliver torque in a vehicle. Springs and valves flex every time they transfer loads. If fatigue failure from flexing occurs in the tooth of a transmission gear of light or heavy vehicles, in a fan blade of a diesel engine, in shock-absorbers or safety-related supporting structures, significant loss of assets and potentially loss of human life occurs. Lasershot peening, better than any other technique, has the potential to extend the fatigue lifetime of metal components. In the process, the laser generates a high intensity shock wave at the surface of the metal, straining …

Hydrogenated amorphous silicon (a-Si:H) has potential advantages in making radiation detectors for many applications because of its deposition capability on a large-area substrate and its high radiation resistance. Position-sensitive radiation detectors can be made out of a 1d strip or a 2-d pixel array of a Si:H pin diodes. In addition, signal processing electronics can be made by thin-film transistors on the same substrate. The calculated radiation signal, based on a simple charge collection model agreed well with results from various wave length light sources and 1 MeV beta particles on sample diodes. The total noise of the detection system was analyzed into (a) shot noise and (b) 1/f noise from a detector diode, and (c) thermal noise and (d) 1/f noise from the frontend TFT of a charge-sensitive preamplifier. the effective noise charge calculated by convoluting these noise power spectra with the transfer function of a CR-RC shaping amplifier showed a good agreement with the direct measurements of noise charge. The derived equations of signal and noise charge can be used to design an a-Si:H pixel detector amplifier system optimally. Signals from a pixel can be readout using switching TFTs, or diodes. Prototype tests of a double-diode readout scheme …

None

This thesis is focused on an inclusive search of the t{bar t} {yields} E{sub T} + jets decay channel by means of neural network tools in proton antiproton collisions at {radical}s = 1.96 TeV recorded by the Collider Detector at Fermilab (CDF). At the Tevatron p{bar p} collider top quarks are mainly produced in pairs through quark-antiquark annihilation and gluon-gluon fusion processes; in the Standard Model description, the top quark then decays to a W boson and a b quark almost 100% of the times, so that its decay signatures are classified according to the W decay modes. When only one W decays leptonically, the t{bar t} event typically contains a charged lepton, missing transverse energy due to the presence of a neutrino escaping from the detector, and four high transverse momentum jets, two of which originate from b quarks. In this thesis we describe a t{bar t} production cross section measurement which uses data collected by a 'multijet' trigger, and selects this kind of top decays by requiring a high-P{sub T} neutrino signature and by using an optimized neural network to discriminate top quark pair production from backgrounds. In Chapter 1, a brief review of the Standard Model of …

The antiproton--proton interaction was studied at three energies, 2.0, 1.25, and 0.98 Bev. Antiprotons produced internally in the Revatron and channeled externally by a system of bending magnets and quadrupoles were selected from background particles by using a gas Cherenkov counter and scintillation counters. At the two lower energies, an electrostatic-magnetic velocity spectrometer was used to reject background particles. A liquidhydrogen target was completely surrounded by scintillation counters so that all charged secondaries from the antiproton--proion interactions could be detected. With the information obtained from these counters, the --p-bar--p total, elastic, inelastic, and charge-exchange cross sections and the angular distribution of the elastic scatterings were obtained at each energy. The total cross section was found to be 80, 89, and 100 mb at 2.0 1.25. and 0.98 Bev. respeclively. The inelastic cross section was about twothirds of ihe total cross section at each energy. It was found that each of the partial cross sections was dropping off slowly with energy. The results were fitted by an optic al-model c alculation. (auth)

To determine the nature of the interactions between antinucleons and nucleons, it has been necessary to do an experiment in which the elastic, inelastic, and charge-exchange interactions could be measured. Improvements in the 6-Bev Bevatron have permitted production of a considerably larger flux of antiprotons, than was available in earlier studies. With the use of strong-focusing magnetic quadrupoles, a crossed electric- and magnetic-field spectrometer, and time-of-flight scintillation counters it has been possible to detect approximately 30 antiprotons per minute. By means of a system of 4{pi} solid-angle scintillation counters, it has been possible to measure these cross sections, including the angular distribution of elastic scattering. These cross sections have been measured for antiprotons scattered from hydrogen, beryllium, and carbon in the energy range from 133 to 333 Mev. Ball and Chew have assumed that pion exchange is responsible for the nucleon-nucleon interaction, and have used field theory to calculate the antinucleon-nucleon interaction. They have assumed that the pionic charge of the antinucleon is opposite that of the nucleon; thus, the exchange of an odd number of pions should change the sign of the potential. Outside the hard core, the exchange is assumed to be due to two pions, and the …

The research in this thesis explores the separation capabilities of a new technique termed electrochemically-modulated liquid chromatography (EMLC). The thesis begins with a general introduction section which provides a literature review of this technique as well as a brief background discussion of the two research projects in each of the next two chapters. The two papers which follow investigate the application of EMLC to the separation of a mixture of aromatic amino acids and of a mixture of polycyclic aromatic hydrocarbons (PAHs). The last section presents general conclusions and summarizes the thesis. References are compiled in the reference section of each chapter. The two papers have been removed for separate processing.

Based on new diiodo aryl compounds a series of novel soluble polymers, poly(2,5-dialkoxy-1,4-phenyleneethynylene)s (PPE polymers) were synthesized using palladium-catalysis. The molecular weights (MW) range from 8,000 to 40,000. Properties such as absorption, fluorescence, and conductivity were studied. A PPE polymer with butoxy side chain exhibits a weak electrical conductivity ({sigma} = 10{sup {minus}3} S/cm) after doping with AsF{sub 5}. Absorption spectra in THF solution at room temperature (RT) show a maximum at 440 nm. However, absorption spectra of PPE polymers in the film state at (RT) show a maximum at 480 nm. PPE polymer-based light emitting diode (LED) devices have been prepared; greenish light from these LED devices can be observed. Poly(ethynylene-p-arylene-ethynylene-silylene)s were synthesized through the same palladium-catalyzed polymerization; MWs are between 6,000 and 82,000. Absorption and fluorescence were studied. Some of these polymers exhibit thermotropic liquid crystalline properties. In addition, nonlinear optical properties were briefly examined. Poly(silylene-ethynylene) homopolymers as well as alternating copolymers were synthesized through a novel palladium-catalyzed polymerization; MWs range from 56 {times} 10{sup 3} to 5.3 {times} 10{sup 3}. Thermal stability of these was also investigated; char yields range from 56 to 83%. One of these polymers exhibits thermotropic liquid crystalline properties.

Three-dimensional meshes modeling nonlinear problems such as sheet metal forming, metal forging, heat transfer during welding, the propagation of microwaves through gases, and automobile crashes require highly refined meshes in local areas to accurately represent areas of high curvature, stress, and strain. These locally refined areas develop late in the simulation and/or move during the course of the simulation, thus making it difficult to predict their exact location. This thesis is a systematic study of new tools scientists can use with redistribution algorithms to enhance the solution results and reduce the time to build, solve, and analyze nonlinear finite element problems. Participatory design techniques including Contextual Inquiry and Design were used to study and analyze the process of solving such problems. This study and analysis led to the in-depth understanding of the types of interactions performed by FEM scientists. Based on this understanding, a prototype tool was designed to support these interactions. Scientists participated in evaluating the design as well as the implementation of the prototype tool. The study, analysis, prototype tool design, and the results of the evaluation of the prototype tool are described in this thesis.