Article describes how high energy synchrotron X-ray diffraction was used during tensile testing of an as-cast eutectic AlCoCrFeNi2.1 high entropy alloy. The authors determine for the first time the volume fractions of existing phases, and they further detail their role on the alloy deformation behavior.

Article describes how, while additive manufacturing (AM) of single-phase solid solution based high entropy alloys (HEAs) has attracted a lot of recent attention, such processing of precipitation strengthenable multi-phase HEAs has not been actively investigated. This becomes important since AM processing results in each layer experiencing rapid solidification followed by multiple heating-cooling cycles, mimicking in situ heat treatments, potentially influencing the phase evolution.

Article describes how fiberboards from scrap denim were fabricated using two different resins, melamine urea formaldehyde (MUF) and polymeric methylene diphenyl diisocyanate (pMDI). Resin content and MUF-pMDI weight ratio were studied. Physical and mechanical tests determined the modulus of elasticity (MOE), modulus of rupture (MOR), internal bond (IB), thickness swell (TS), and water absorption (WA).

Article describes how Li-CO2 batteries with a theoretical energy density of 1,876 Wh kg−1 are attractive as a promising energy storage strategy and as an effective way to reduce greenhouse gas emissions by CO2 reduction and the formation of discharge product Li2CO3 and carbon. This article provides critical perspectives on the development of Li-CO2 batteries as well as a description of current issues and challenges associated with cathode catalysts, electrolyte, and anode for Li-CO2 batteries.

Article using ab initio calculations and experimental observations to show that {332}<113> twinning can be described as a polymorphic solid-state transformation able to produce either twinned or martensitic structures with a unified transformation path.

Article presents for the first time the influence of a hierarchically decomposed B2 + A2 structure in an AlCo0.5Cr0.5FeNi HEA on the formation of magnetic vortex states within individual A2 (disordered BCC) precipitates, which are distributed in an ordered B2 matrix that is weakly ferromagnetic.

This article is a study where the authors integrated the multi-omics datasets such as copy number aberration, DNA methylation, gene and microRNA expression to identify the signature microRNA-gene associations from frequently aberrated DNA regions across pan-cancer utilizing a LASSO-based regression approach.

Article presents a motion-sensing device with the capability of harvesting energy from low-frequency motion activities. Based on the high surface area reverse electrowetting-on-dielectric (REWOD) energy harvesting technique, mechanical modulation of the liquid generates an AC signal, which is modeled analytically and implemented in Matlab and COMSOL.

Article investigating the effect of the relative motion of nano CaCO3 reinforced bamboo pulp fiber (BPF)/HDPE composite components on the mechanical performance.

Article says that plasmonic and phase transition has been blended to gain the infrared radiative switching which is tunable with temperature or voltage supply. This is applied via vanadium dioxide, tungsten trioxide, and molybdenum trioxide as transition metal oxides (TMO), the authors state that the work expands the usage of transition metal oxides in infrared region with larger contrast.

Article investigates the strength-ductility synergy of high-entropy alloys (HEAs).

Article reporting on the inkjet printed, direct contact study of solution-processed, 2D perovskite-based photodetectors (PDs) formed on flexible PI substrates. Silver (Ag) and graphene (Gr) inks have been engineered to serve as efficient electrical contacts for solution-processed two-dimensional (2D) organo-halide (CH3(CH2)3NH3)2(CH3NH3)n−1PbnI3n+1 (n = 4) layered perovskites, where all inkjet-printed heterostructure PDs were fabricated on polyimide (PI) substrates.

This article describes a system for pupil size estimation with a user interface to allow rapid adjustment of parameters and extraction of pupil parameters of interest in order to identify Parkinson's disease (PD) as early as possible.

This article is motivated by the promise of emerging nanocomposites and reports for the first time the adsorption performance of an aluminum-based MOF (MIL-53(Al)) and GO nanocomposite for Pb(II) removal from aqueous solutions.

This article assembles large, pediatric-sized stents (Ø10 - Ø20 mm) from poly(L-lactide) fibers (DH-BDS) at two thicknesses, 250 µm and 300 µm. DH-BDS exhibiting hoop strength similar to metal stents and demonstrating minimal degradation and strength loss over the first year before completely disappearing within 3 to 4.5 years show promise as a pediatric interventional alternative to current strategies.

This article is a review that categorizes the compositional and microstructural approaches that exhibit potential for a combination of shear induced phase transformation and twinning, thereby expanding beyond the slip based mechanisms.

This article proposes a strategy for preparing advanced soy protein (SP)-based films by solution casting of SP and hydroxyl and primary amine-containing hyperbranched polysiloxane (HPSA). It offers a simple methodology for the design of mechanically robust, recyclable, and biodegradable composite films, which have potential applications in the fabrication of high-performance, high-transparency, and anti-counterfeiting packaging materials.

This article highlights that design of Al alloys for laser-powder bed fusion (L-PBF) can lead to fundamental change in the microstructure evolution, proposed alloy design strategies lead to synergy between and printability and performance, hierarchical and heterogeneous microstructures have potential to overcome the strength-ductility tradeoff, and alloy design incorporating the specific attributes of an AM technology is crucial to maximizing its potential.

This article presents a power-efficient complementary metal-oxide-semiconductor (CMOS) neural signal-recording read-out circuit for multichannel neuromodulation implants.

This article explores various combinations of electrolyte concentrations, dielectrics, and dielectric thicknesses to generate maximum output power employing REWOD energy harvester with the objective of implementing a fully self-powered wearable sensor.

Article reviewing the modeling and verification of products derived from biomass pyrolysis and discussing the possible solutions towards more accurate modeling of biomass pyrolysis.

This article proposes a novel preconditioned and accelerated Gauss–Siedel algorithm referred to as Symmetric Successive Overrelaxation Preconditioned Gauss-Seidel (SSORGS) to address the signal detection challenges associated with massive MIMO technology.

This article highlights a study of a bio adhesive was developed from soybean meal and larch tannin that was designed for exterior use. Phenol hydroxymethylated tannin oligomer (PHTO) was synthesized and then mixed with soybean meal flour in order to obtain a soybean meal-based adhesive (SPA). The results showed that the moisture absorption rate, residual rate, and solid content of SPA with 10 wt % PHTO (mass ratio with respect to the entire adhesive) were improved by 22.8%, 11.6%, and 6.8%, respectively, as compared with that of pure SPA.

Describes the development of a strong mold-resistant adhesive by incorporating soybean meal and blood meal.