The sustained propagation of combustion fronts in porous media is a necessary condition for the success of an in situ combustion project for oil recovery. Compared to other recovery methods, in situ combustion involves the added complexity of exothermic reactions and temperature-dependent chemical kinetics. In the presence of heat losses, the possibility of ignition and extinction (quenching) exists. In this report, we address the properties of combustion fronts propagating at a constant velocity in the presence of heat losses.

Using 385 fb{sup -1} of e{sup +}e{sup -} collision data collected at center-of-mass energies around 10.6 GeV, we search for time-integrated CP violation in the Cabibbo-suppressed decays D{sup 0}/{bar D}{sup 0} {yields} {pi}{sup -}{pi}{sup +}{pi}{sup 0} and D{sup 0}/{bar D}{sup 0} {yields} K{sup -}K{sup +}{pi}{sup 0} with both model-independent and model-dependent methods. Measurements of the asymmetries in amplitudes of flavor states and CP eigenstates provide constraints on theories beyond the Standard Model, some of which predict CP violation in amplitudes at the 1% level or higher. We find no evidence of CP violation and hence no conflict with the Standard Model.

With a sample of approximately 89 million B{bar B} pairs collected with the BABAR detector, they measure branching fractions, determine the degree of longitudinal polarization, and search for direct CP violation in the decays B{sup 0} {yields} {phi}K*{sup 0} and B{sup +} {yields} {phi}K*{sup +}. They perform a search for other charmless vector-vector B decays involving {rho} and K*(892) resonances and observe the decays B{sup +} {yields} {rho}{sup 0} K*{sup +} and B{sup +} {yields} {rho}{sup 0}{rho}{sup +}. The branching fractions are measured to be {Beta}({phi}K*{sup 0}) = (11.1{sub -1.2}{sup +1.3} {+-} 1.1) x 10{sup -6}, {Beta}({phi}K*{sup +}) = (12.1{sub -1.9}{sup +2.1} {+-} 1.5) x 10{sup -6}, {Beta}({rho}{sup 0} K*{sup +}) = (7.7{sub -2.0}{sup +2.1} {+-} 1.4) x 10{sup -6}, and {Beta}({rho}{sup 0}{rho}{sup +}) = (9.9{sub -2.5}{sup +2.6} {+-} 2.5) x 10{sup -6}. The longitudinal polarization fractions are measured to be {Lambda}{sub L}/{Lambda}({phi}K*{sup 0}) = 0.65 {+-} 0.07 {+-} 0.04 and {Lambda}{sub L}/{Lambda}({phi}K*{sup +}) = 0.46 {+-} 0.12 {+-} 0.05. They measure the charge asymmetries: {Alpha}{sub CP}({phi}K*{sup 0}) = +0.04 {+-} 0.12 {+-} 0.02 and {Alpha}{sub CP}({phi}K*{sup +}) = +0.16 {+-} 0.17 {+-} 0.04.

None

None

The objectives of the VITALINKS tabletop exercise are to: Raise awareness of infrastructure interdependency issues; Identify and focus on the most important vulnerabilities and restoration priorities resulting from infrastructure disruptions; Examine the resources (people and equipment) required to sustain systems under emergency conditions; Identify and highlight roles, responsibilities, and authorities (including trans-border issues); and Continue to foster a more effective interface among public and private sector service providers and public officials in developing and implementing critical infrastructure protection, mitigation, response, and recovery options.

None

The report presents results of a workshop held August 6-8, 2007, by DOE SC Basic Energy Sciences to determine the basic research needs for catalysis research.

None

This report provides historical background of the Council, including the role of the previous Commission. It discusses the Council's current mandate and structure, as well as U.S. policy and congressional actions.

Renewable power technologies are inherently capital-intensive, often (but not always) with relatively high construction costs and low operating costs. For this reason, renewable power technologies are typically more sensitive to the availability and cost of financing than are natural gas power plants, for example. In the United States, the bulk of renewable project finance in recent years has been provided by 'tax equity investors' (typically large investment banks and insurance companies) who partner with project developers through highly specialized financing structures (Bolinger, 2009; Cory et al., 2008; Harper et al., 2007). These structures have been designed primarily to capitalize on federal support for renewable power technologies, which has historically come in the form of tax credits and accelerated depreciation deductions. The number of tax equity investors active in the renewable power market has declined precipitously, however, as a result of the financial crisis that began unfolding across the globe in the summer of 2008. The resulting shortage and increased cost of project financing has, in turn, slowed the development of new renewable power projects, leading to layoffs throughout the entire industry supply chain. In recognition of the fact that tax-based policy incentives are not particularly effective when tax burdens are …

This report discusses issues surrounding Japan's interest in purchasing the F-22A Raptor aircraft from the United States. Although the export of the plane is now prohibited by U.S. law, Congress has recently and may again consider repealing this ban.

Surface waves were generated by the North Korean nuclear explosion of 9 October 2006 and recorded at epicentral distances up to 34 degrees, from which we estimated a surface wave magnitude (M{sub s}) of 2.94 with an interstation standard deviation of 0.17 magnitude units. The International Data Centre estimated a body wave magnitude (m{sub b}) of 4.1. This is the only explosion we have analyzed that was not easily screened as an explosion based on the differences between the M{sub s} and m{sub b} estimates. Additionally, this M{sub s} predicts a yield, based on empirical M{sub s}/Yield relationships, that is almost an order of magnitude larger then the 0.5 to 1 kiloton reported for this explosion. We investigate how emplacement medium effects on surface wave moment and magnitude may have contributed to the yield discrepancy.

None

This report briefly describes the modernization program for the U.S. military forces and discusses issues of feasibility, viability, and affordability of potential interest to Congress.

None

While oil shale has the potential to provide a substantial fraction of our nation's liquid fuels for many decades, cost and environmental acceptability are significant issues to be addressed. Lawrence Livermore National Laboratory (LLNL) examined a variety of oil shale processes between the mid 1960s and the mid 1990s, starting with retorting of rubble chimneys created from nuclear explosions [1] and ending with in-situ retorting of deep, large volumes of oil shale [2]. In between, it examined modified-in-situ combustion retorting of rubble blocks created by conventional mining and blasting [3,4], in-situ retorting by radio-frequency energy [5], aboveground combustion retorting [6], and aboveground processing by hot-solids recycle (HRS) [7,8]. This paper reviews various types of processes in both generic and specific forms and outlines some of the tradeoffs for large-scale development activities. Particular attention is given to hot-recycled-solids processes that maximize yield and minimize oil shale residence time during processing and true in-situ processes that generate oil over several years that is more similar to natural petroleum.

Described is a manual,portable non-destructive technique to determine the through wall height of cracks present in dissimilar metal welds used in the primary coolling systems of pressure water and boiler light water reactors. Current manual methods found in industry have proven not to exhibit the sizing accuracy required by ASME inspection requirement. The technique described demonstrated an accuracy approximately three times that required to ASME Section XI, Appendix 8 qualification.

Effects of two types of chemical modifications on photoconducting polymers consisting of polyphenylenevinylene (PPV) derivatives are studied by static and ultrafast transient optical spectroscopy as well as semi-empirical ZINDO calculations. The first type of modification inserts 2,2{prime}-bipyridyl-5-vinylene units (bpy V) in the PPV backbone, and the second type involves metal-chelation with the bpy sites. Photoluminescence and exciton dynamics of polymers 1 and 2 with PV:bpyV ratios of 1 and 3 were examined in solution, and compared to those of the homopolymer, poly(2,5-bis(2{prime}-ethylhexyloxy)-1,4-phenylenevinylene) (BEH-PPV). Similar studies were carried out for several metal-chelated polymers. These results can be explained by changes in {pi}-conjugation throughout the polymer backbone. The attenuation in {pi}-conjugation by the chemical modifications transforms a conducting polymer from one-dimensional semiconductor to molecular aggregates.

Staff of Brookhaven National Laboratory, Columbia University, IBM and the RIKEN BNL Research Center organized a one-day workshop held on February 28, 2003 at Brookhaven to promote the following goals: (1) To explore areas other than QCD applications where the QCDOC and BlueGene/L machines can be applied to good advantage, (2) To identify areas where collaboration among the sponsoring institutions can be fruitful, and (3) To expose scientists to the emerging software architecture. This workshop grew out of an informal visit last fall by BNL staff to the IBM Thomas J. Watson Research Center that resulted in a continuing dialog among participants on issues common to these two related supercomputers. The workshop was divided into three sessions, addressing the hardware and software status of each system, prospective applications, and future directions.

Dissolution experiments were conducted on radioactive sludge from Tank 7, before transfer of the contents of Tank 7 to Tank 51, and the subsequent sludge in Tank 51 to evaluate the effectiveness of the DWPF Cold Chem Method. The DWPF Cold Chem Method is a room temperature dissolution method (DWPF Cold Chem Method) used in the DWPF on the Slurry Receipt and Adjustment Tank (SRAT) samples in preparation for instrumental analysis. Four types of dissolutions experiments were carried out, the DWPF Cold Chem Method, hot aqua regia, sodium peroxide fusion and hot HF-HNO3. The hot HF-HNO3 digestion is modified version of the DWPF method that incorporates a heating step. The hot aqua regia and sodium peroxide fusion digestions were included as reference digestions. The resulting solutions from all the sludge digestions were analyzed by ICP-ES (Inductively Coupled Plasma Emission Spectroscopy). Visual observations and ICP-ES results were used to evaluate the effectiveness of the DWPF Cold Chem by comparison to the hot aqua regia, sodium peroxide fusion and the hot HF-HNO3 digestions. The data and experimental observations support the following conclusions: The DWPF Cold Chem Method seemed to be effective at dissolving initial species of radioactive sludge, but concurrent precipitation of …

This report examines the issues and their implications for future regulatory reforms, but begins with a brief background discussion of the Regulatory Flexibility Act (RFA) itself.

None

This report discusses the ongoing debate about whether or not to approve energy development in the Arctic National Wildlife Refuge (ANWR). Current law forbids energy leasing in the Refuge. This report addresses several legislative options on the issue, as well as policymakers' arguments for and against development, especially in the wake of increasing terrorism since 2000-2001.