Epitaxially grown FeMn/Ni/Cu(001) films are investigated by Photoemission Electron Microscopy and Magneto-Optic Kerr Effect. We find that as the FeMn overlayer changes from paramagnetic to antiferromagnetic state, it could switch the ferromagnetic Ni spin direction from out-of-plane to in-plane direction of the film. This phenomenon reveals a new mechanism of creating magnetic anisotropy and is attributed to the out-of-plane spin frustration at the FeMn-Ni interface.

The electronic structure of Mn in amorphous Si (a-Mn{sub x}Si{sub 1?x}) is studied by X-ray absorption spectroscopy at the Mn L{sub 3,2} edges for x = 0.005-0.18. Except the x = 0.005 sample, which shows a slight signature of Mn{sup 2+} atomic multiplets associated with a local Mn moment, all samples have broad and featureless L{sub 3,2} absorption peaks, corresponding to an itinerant state for all 3d electrons. The broad X-ray absorption spectra exclude the possibility of a localized 3d moment and explain the unexpectedly quenched Mn moment in this magnetically-doped amorphous semiconductor. Such a fully delocalized d state of Mn dopant in Si has not been previously suggested.

We present the first experimental radium mineral/melt partitioning data, specifically between anorthite and a CMAS melt at atmospheric pressure. Ion microprobe measurement of coexisting anorthite and glass phases produces a molar D{sub Ra} = 0.040 {+-} 0.006 and D{sub Ra}/D{sub Ba} = 0.23 {+-} 0.05 at 1400 C. Our results indicate that lattice strain partitioning models fit the divalent (Ca, Sr, Ba, Ra) partition coefficient data of this study well, supporting previous work on crustal melting and magma chamber dynamics that has relied on such models to approximate radium partitioning behavior in the absence of experimentally determined values.

Pt-modified NiAl is widely used as a coating material in industry. In this study, the surface energies of NiAl with and without Pt are investigated using first-principles calculations. The presence of Pt in NiAl takes the surface electronic states to higher energies, resulting in an increased surface energy, which explains some of the beneficial effects of Pt on the oxidation resistance of NiAl. The electronic structure of NiAl-Pt alloys is also analyzed in terms of the site preference of Pt in NiAl. Results show that Pt bonds strongly to Al, giving its site preference on the Ni site.

A new nonlinear thermo-mechanical model for heavily jointed rock masses is presented. The model uses correlation functions between the porosity and the basic rock properties such as elastic moduli, tensile and compressive strength. The model assumes that the media is isotropic and is characterized by two variable parameters: insipient porosity and in-situ-to-intact modulus ratio.

The intensity ratios of 3 {yields} 2 emission lines of Fe XVIII and Ni XX were measured on the Livermore electron beam ion trap (EBIT-I) with a flat-field grating spectrometer. The results were compared with distorted-wave (DW) calculations obtained with the Flexible Atomic Code and recent close-coupling calculations using the R-matrix code. The measured 3s {yields} 2p/3d {yields} 2p ratios are about 20-40% higher than the theoretical values. When more extended configuration interaction is included in the DW theory, the agreement with the measurements improved slightly. At the beam energies of these measurements, no significant resonance contribution is expected to be present, and the discrepancies represent the uncertainties in the direct excitation cross sections.

The new physics, algorithmic and computer science capabilities of the Mercury general-purpose Monte Carlo particle transport code are discussed. The new physics and algorithmic features include in-line energy deposition and isotopic depletion, significant enhancements to the tally and source capabilities, diagnostic ray-traced particles, support for multi-region hybrid (mesh and combinatorial geometry) systems, and a probability of initiation method. Computer science enhancements include a second method of dynamically load-balancing parallel calculations, improved methods for visualizing 3-D combinatorial geometries and initial implementation of an in-line visualization capabilities.

In a series of experiments and linked theoretical modeling, the range of possible solutions for Pu electronic structure has been dramatically reduced. Nevertheless, the key issue of electron correlation remains.

Cryogenic microcalorimeter detectors operating at temperatures around {approx}0.1 K have been developed for the last two decades, driven mostly by the need for ultra-high energy resolution (<0.1%) in X-ray astrophysics and dark matter searches [1]. The Advanced Detector Group at Lawrence Livermore National Laboratory has developed different cryogenic detector technologies for applications ranging from X-ray astrophysics to nuclear science and non-proliferation. In particular, we have adapted cryogenic detector technologies for ultra-high energy resolution gamma-spectroscopy [2] and, more recently, fast-neutron spectroscopy [3]. Microcalorimeters are essentially ultra-sensitive thermometers that measure the energy of the radiation from the increase in temperature upon absorption. They consist of a sensitive superconducting thermometer operated at the transition between its superconducting and its normal state, where its resistance changes very rapidly with temperature such that even the minute energies deposited by single radiation quanta are sufficient to be detectable with high precision. The energy resolution of microcalorimeters is fundamentally limited by thermal fluctuations to {Delta}E{sub FWHM} {approx} 2.355 (k{sub B}T{sup 2}C{sub abs}){sup 1/2}, and thus allows an energy below 1 keV for neutron spectrometers for an operating temperature of T {approx} 0.1 K . The {Delta}E{sub FWHM} does not depend on the energy of the incident photon …

We applied a 0.3 mJ, 1.7 ns, 46.9 nm soft X-ray Argon laser to ablate the surface of large band gap dielectrics: CaF{sub 2} and LiF crystals. The ablation versus the fluence of the soft X-ray beam has been studied varying the fluence in the range of 0.05-3 J/cm{sup 2}. An ablation threshold of 0.06 and 0.1 J/cm{sup 2} and an ablation depth of 14 and 20 nm have been found for CaF{sub 2} and LiF, respectively. These results define new ablation conditions for these large band gap dielectrics, which can be of interest for the fine processing of these materials.

The trend for men to have children at older ages raises concerns that advancing age may increase the production of genetically defective sperm, increasing the risks of transmitting germ-line mutations. We investigated the associations between male age and sperm DNA damage and the influence of several lifestyle factors in a healthy non-clinical group of 80 non-smokers (age: 22-80) with no known fertility problems using the sperm Comet analyses. The average percent of DNA that migrated out of the sperm nucleus under alkaline electrophoresis increased with age (0.18% per year, p=0.006); but there was no age association for damage measured under neutral conditions (p=0.7). Men who consumed >3 cups coffee per day had {approx}20% higher % tail DNA under neutral but not alkaline conditions compared to men who consumed no caffeine (p=0.005). Our findings indicate that (a) older men have increased sperm DNA damage associated with alkali-labile sites or single-strand DNA breaks, and (b) independent of age, men with substantial daily caffeine consumption have increased sperm DNA damage associated with double-strand DNA breaks. DNA damage in sperm can be converted to chromosomal aberrations and gene mutations after fertilization increasing the risks for developmental defects and genetic diseases among offspring.

Centrosomes are small organelles that organize the mitoticspindle during cell division and are also involved in cell shape andpolarity. Within epithelial tumors, such as breast cancer, and somehematological tumors, centrosome abnormalities (CA) are common, occurearly in disease etiology, and correlate with chromosomal instability anddisease stage. In situ quantification of CA by optical microscopy ishampered by overlap and clustering of these organelles, which appear asfocal structures. CA has been frequently associated with Tp53 status inpremalignant lesions and tumors. Here we describe an approach toaccurately quantify centrosomes in tissue sections and tumors.Considering proliferation and baseline amplification rate the resultingpopulation based ratio of centrosomes per nucleus allow the approximationof the proportion of cells with CA. Using this technique we show that20-30 percent of cells have amplified centrosomes in Tp53 null mammarytumors. Combining fluorescence detection, deconvolution microscopy and amathematical algorithm applied to a maximum intensity projection we showthat this approach is superior to traditional investigator based visualanalysis or threshold-based techniques.

The Dubinin-Astashov (DA) isotherm parameters for U, Pu, Sr and Np have been updated to include additional data obtained since the original derivation. The DA isotherms were modified to include a kinetic function derived by Rahn to describe sorbate loading from the beginning of sorption up to steady state. The final functions describe both kinetic and thermodynamic sorption.

Rising atmospheric concentrations of CO2, and their role inglobal warming, have prompted efforts to reduce emissions of CO2 fromburning of fossil fuels. An attractive mitigation option underconsideration in many countries is the injection of CO2 from stationarysources, such as fossil-fueled power plants, into deep, stable geologicformations, where it would be stored and kept out of the atmosphere fortime periods of hundreds to thousands of years or more. Potentialgeologic storage reservoirs include depleted or depleting oil and gasreservoirs, unmineable coal seams, and saline formations. While oil andgas reservoirs may provide some attractive early targets for CO2 storage,estimates for geographic regions worldwide have suggested that onlysaline formations would provide sufficient storage capacity tosubstantially impact atmospheric releases. This paper will focus on CO2storage in saline formations.Injection of CO2 into a saline aquifer willgive rise to immiscible displacement of brine by the advancing CO2. Thelower viscosity of CO2 relative to aqueous fluids provides a potentialfor hydrodynamic instabilities during the displacement process. Attypical subsurface conditions of temperature and pressure, CO2 is lessdense than aqueous fluids and is subject to upward buoyancy force inenvironments where pressures are controlled by an ambient aqueous phase.Thus CO2 would tend to rise towards the top of a permeable formation andaccumulate …

The oxidation state distribution of Pu in each sample for each reaction time was measured using a combined ultrafiltration and solvent extraction technique (1-4). First the oxidation state distribution of aqueous Pu is measured. Then the total system (solid and aqueous phase combined) Pu oxidation state distribution is measured by lowering the pH to leach Pu from the solid phase. For each reaction time, a 2.5-mL aliquot of the aqueous phase was removed and passed through a 12-nm filter (Microsep 30K MWCO Centrifugal Device; Pall Corporation, East Hills, NY). An aliquot of the filtrate was removed to determine the aqueous phase Pu concentration, and oxidation state distribution in the remaining filtrate was measured using the parallel solvent extraction technique discussed.

The thermal stability of the neat LiPF6 salt and of 1 molal solutions of LiPF6 in prototypical Li-ion battery solvents was studied with thermogravimetric analysis (TGA) and on-line FTIR. Pure LiPF6 salt is thermally stable up to 380 K in a dry inert atmosphere, and its decomposition path is a simple dissociation producing LiF as solid and PF5 as gaseous products. In the presence of water (300 ppm) in the carrier gas, its decomposition onset temperature is lowered as a result of direct thermal reaction between LiPF6 and water vapor to form POF3 and HF. No new products were observed in 1 molal solutions of LiPF6 in EC, DMC and EMC by on-line TGA-FTIR analysis. The storage of the same solutions in sealed containers at 358 K for 300 420 hrs. did not produce any significant quantity of new products as well. In particular, noalkylflurophosphates were found in the solutions after storage at elevated temperature. In the absence of either an impurity like alcohol or cathode active material that may (or may not) act as a catalyst, there is no evidence of thermally induced reaction between LiPF6 and the prototypical Li-ion battery solvents EC, PC, DMC or EMC.

Iterative projection algorithms are successfully being used as a substitute of lenses to recombine, numerically rather than optically, light scattered by illuminated objects. Images obtained computationally allow aberration-free diffraction-limited imaging and allow new types of imaging using radiation for which no lenses exist. The challenge of this imaging technique is transferred from the lenses to the algorithms. We evaluate these new computational ''instruments'' developed for the phase retrieval problem, and discuss acceleration strategies.

Event horizons and closed time-like curves cannot exist in the real world for the simple reason that they are inconsistent with quantum mechanics. Following ideas originated by Robert Laughlin, Pawel Mazur, Emil Mottola, David Santiago, and the speaker it is now possible to describe in some detail what happens physically when one approaches and crosses a region of space-time where classical general relativity predicts there should be an infinite red shift surface. This quantum critical physics provides a new perspective on a variety of enigmatic astrophysical phenomena including supernovae explosions, gamma ray bursts, positron emission, and dark matter.

This paper presents a novel slideway bearing design comprised of a thin-film (0.1 mm-0.2 mm) of ultra-high molecular weight polyethylene (UHMWPE) bound to a rigid hemispherical substrate. Two prototype bearing designs were fabricated and tested to characterize the coefficient of friction (dynamic and static) and wear of the polymer. In addition, similar bearings were incorporated into a kinematically constrained rectilinear carriage to determine the repeatability of motion during multiple traverses. The first bearing had a radius of curvature on the order of 2.38 mm incorporating an UHMWPE film thickness between 0.1 mm and 0.2 mm. The friction coefficient was measured to be between 0.155 and 0.189 for normal loads of 11.5 N and 2.2 N, respectively at a surface speed of 4.2 mm {center_dot} s{sup -1}. This bearing failed after a traverse of approximately 700 m at a load of 11.5 N. A similar evaluation procedure was carried out on a bearing of radius 6.35 mm resulting in a friction coefficient between 0.125 and 0.185 at loads of 27.8 N and 2.2 N, respectively, and the bearing endured a traverse of over 2.2 km at a load of approximately 28 N (in both air and vacuum conditions) with a surface …

None

A real-time radiological sensor network for emergency response was developed and deployed at the Lawrence Livermore National Laboratory (LLNL). The Real-Time Radiological Area Monitoring (RTRAM) network is comprised of 16 Geiger-Mueller (GM) sensors positioned on the LLNL Livermore site perimeter to continuously monitor for a radiological condition resulting from a terrorist threat to site security and the health and safety of LLNL personnel. The RTRAM network sensor locations coincide with wind sector directions to provide thorough coverage of the one square mile site. These low-power sensors are supported by a central command center (CCC) and transmit measurement data back to the CCC computer through the LLNL telecommunications infrastructure. Alarm conditions are identified by comparing current data to predetermined threshold parameters and are validated by comparison with plausible dispersion modeling scenarios and prevailing meteorological conditions. Emergency response personnel are notified of alarm conditions by automatic radio and computer based notifications. A secure intranet provides emergency response personnel with current condition assessment data that enable them to direct field response efforts remotely. The RTRAM network has proven to be a reliable system since initial deployment in August 2001 and maintains stability during inclement weather conditions.

An article, written by Debra Rosenberg and Mark Miller for Newsweek, about President George W. Bush's support of the marriage amendment that would ban gay and lesbian marriages at the federal level. It includes the response of Charles C. Francis and other gay and lesbian Republicans. An advertisement follows the article.

A chemical ionization mass spectrometry (CIMS) technique has been developed for precise in situ measurements of hydrochloric acid (HCl) from a high-altitude aircraft. In measurements at subtropical latitudes, minimum HCl values found in the upper troposphere (UT) are often near or below the 0.005-ppbv detection limit of the measurements, indicating that background HCl values are much lower than a global mean estimate. However, significant abundances of HCl were observed in many UT air parcels as a result of stratosphere-to-troposphere transport events. A method for diagnosing the amount of stratospheric ozone in these UT parcels was developed using the compact linear correlation of HCl with ozone found throughout the lower stratosphere (LS). Expanded use of this method will lead to improved quantification of cross-tropopause transport events and validation of global chemical transport models.

Radioactive waste is stored in underground storage tanks at the Department of Energy (DOE) Savannah River Site (SRS). The waste tanks store supernatant liquid salts, consisting primarily of sodium nitrate, sodium nitrite, sodium hydroxide, and sludge. An assessment of the potential degradation mechanisms of the high level waste (HLW) tanks determined that nitrate- induced pitting corrosion and stress corrosion cracking were the two most significant degradation mechanisms. Controls on the solution chemistry (minimum nitrite and hydroxide concentrations) are in place to prevent the initiation and propagation of pitting and stress corrosion cracking in the tanks. These controls are based upon a series of experiments performed using simulated solutions on materials used for construction of the tanks. The technical bases and evolution of these controls is presented.