Article describes experiment in which liquid Al2O3 was supercooled more than 500 K below its melting point (Tm = 2,327 K) using aerodynamic levitation and laser heating techniques.

This article reviews approaches for improvement of tribological properties of polymers based on inclusion of fillers.

This article explores various combinations of electrolyte concentrations, dielectrics, and dielectric thicknesses to generate maximum output power employing REWOD energy harvester with the objective of implementing a fully self-powered wearable sensor.

Article describes study which sought to evaluate the efficiency of pilot water desalination system treating brackish water which was obtained mixing fresh water and seawater up to reach 1,500 mg L-1 of total dissolved solids (TDS) concentration.

Article discusses a novel eutectoid nano-lamellar (FCC + L12)/(BCC + B2) microstructure that has been discovered in a relatively simple Al0.3CoFeNi high entropy alloy (HEA) or complex concentrated alloy (CCA).

This report reflects the efforts of the Office of the Orinoco-Apure Project to define an environmental policy based research delineating priority areas of research and identification of potential environmental impacts of the project.

This article highlights that design of Al alloys for laser-powder bed fusion (L-PBF) can lead to fundamental change in the microstructure evolution, proposed alloy design strategies lead to synergy between and printability and performance, hierarchical and heterogeneous microstructures have potential to overcome the strength-ductility tradeoff, and alloy design incorporating the specific attributes of an AM technology is crucial to maximizing its potential.

This article describes a system for pupil size estimation with a user interface to allow rapid adjustment of parameters and extraction of pupil parameters of interest in order to identify Parkinson's disease (PD) as early as possible.

Article describes how Li-CO2 batteries with a theoretical energy density of 1,876 Wh kg−1 are attractive as a promising energy storage strategy and as an effective way to reduce greenhouse gas emissions by CO2 reduction and the formation of discharge product Li2CO3 and carbon. This article provides critical perspectives on the development of Li-CO2 batteries as well as a description of current issues and challenges associated with cathode catalysts, electrolyte, and anode for Li-CO2 batteries.

Article presents for the first time the influence of a hierarchically decomposed B2 + A2 structure in an AlCo0.5Cr0.5FeNi HEA on the formation of magnetic vortex states within individual A2 (disordered BCC) precipitates, which are distributed in an ordered B2 matrix that is weakly ferromagnetic.

This paper discusses the formation of primary chemical bonds between bamboo surface active groups and the binders.

In this paper, the authors introduce PicNet, a Web-based system for augmenting semantic resources with illustrative images using volunteer contributions over the Web.

Article reviewing the modeling and verification of products derived from biomass pyrolysis and discussing the possible solutions towards more accurate modeling of biomass pyrolysis.

This article is a study where the authors integrated the multi-omics datasets such as copy number aberration, DNA methylation, gene and microRNA expression to identify the signature microRNA-gene associations from frequently aberrated DNA regions across pan-cancer utilizing a LASSO-based regression approach.

Article presents a motion-sensing device with the capability of harvesting energy from low-frequency motion activities. Based on the high surface area reverse electrowetting-on-dielectric (REWOD) energy harvesting technique, mechanical modulation of the liquid generates an AC signal, which is modeled analytically and implemented in Matlab and COMSOL.

Poster awarded first place in the 2013 UNT Graduate Exhibition in the Engineering category. This poster discusses laser machining of structural ceramics and an integrated experimental and numerical approach for surface finish.

Article reporting on the inkjet printed, direct contact study of solution-processed, 2D perovskite-based photodetectors (PDs) formed on flexible PI substrates. Silver (Ag) and graphene (Gr) inks have been engineered to serve as efficient electrical contacts for solution-processed two-dimensional (2D) organo-halide (CH3(CH2)3NH3)2(CH3NH3)n−1PbnI3n+1 (n = 4) layered perovskites, where all inkjet-printed heterostructure PDs were fabricated on polyimide (PI) substrates.

Describes the development of a strong mold-resistant adhesive by incorporating soybean meal and blood meal.

This article describes a study to improve the electrical and thermal conductivity of the polylactic acid/wood flour/thermoplastic polyurethane composites by Fused Deposition Modeling (FDM). The results showed that, when the addition amount of nano-graphite reached 25 pbw, the volume resistivity of the composites decreased to 10⁸ Ω·m, which was a significant reduction, indicating that the conductive network was already formed. It also had good thermal conductivity, mechanical properties, and thermal stability.

Article presents an in-depth discussion of liquid crystal blue phases (BPs).

Article describes study which sought to evaluate methods for activity recognition for toddlers.

This article highlights a study of a bio adhesive was developed from soybean meal and larch tannin that was designed for exterior use. Phenol hydroxymethylated tannin oligomer (PHTO) was synthesized and then mixed with soybean meal flour in order to obtain a soybean meal-based adhesive (SPA). The results showed that the moisture absorption rate, residual rate, and solid content of SPA with 10 wt % PHTO (mass ratio with respect to the entire adhesive) were improved by 22.8%, 11.6%, and 6.8%, respectively, as compared with that of pure SPA.

This article presents a power-efficient complementary metal-oxide-semiconductor (CMOS) neural signal-recording read-out circuit for multichannel neuromodulation implants.

This article, as an alternative route to empirical models, shows that a structural descriptor based on the number of topological constraints per atom can be used to predict the initial dissolution rate of aluminosilicate and borosilicate glasses after being parameterized on different families of glasses (specific series of borosilicate glasses). Results show that, provided that corrections are made for high alkali content glasses that dissolve incongruently (preferential release of Na), the model gives reasonable predictions, even far from its training domain.