This is an observational report on captive seal pups along Green Island and Sand Island during the 1981 population observations. Some pups were flipper-tagged after weaning, five females were kept in a large beach enclosure for observation, then released September 2nd.

Report on the environmental impact of Argonne National Laboratory.

Report on research and development of the lead-acid battery for electric vehicle propulsion, focusing on continuing development on the forced electrolyte flow-through concept with some work on the composite, plastic/lead grid.

"In recent years, the increasing sophistication of transmission electron microscope (TEM) studies of materials has necessitated more exacting methods of specimen preparation. The present report describes improved equipment and techniques for electropolishing and chemically polishing a wide variety of specimens. Many of the specimens used in developing or improving the techniques to be described were irradiated with heavy ions such as nickel or vanadium to study radiation damage. The high cost of these specimens increased the need for reproducible methods of initial preparation postirradiation processing, and final thinning for TEM examination. A technique was also developed to salvage specimens that had previously been thinned but were unusable for various reasons. Jet polishing is, in general, the method of choice for surface polishing, sectioning, and thinning. The older beaker electropolishing method is included in this report because it is inexpensive and simple, and gives some insight into how the more recent methods were developed"--NTIS abstract.

From abstract: This paper describes a Bessel null technique to measure the frequency response of a frequency-modulated rf carrier and a program to automate frequency response measurements of signal generators with output frequencies from 0.450 to 2000 MHz. The measurements obtained using this technique are more precise than those obtained by a highly trained technician using a manual system.

The conditions are given for which the more flexible of two cantilevered, telescoping tubes conveying fluid can be self-excited by flow leaking from an un-constricted slip joint. Also, a physical explanation of the excitation mechanism is discussed, and a design rule to avoid the mechanism is presented. In addition, the results for the un-constricted slip joint are shown to be similar to those for slip joints having annulus constrictions at very short engagement lengths.