Report issued by the Bureau of Mines over petroleum-engineering studies conducted at the Sheridan oil field. The methods used for the study are presented and discussed. This report includes tables, maps, illustrations, and photographs.

Report issued by the Bureau of Mines over studies conducted on zinc-lead fields of Oklahoma and Kansas. Properties of the physical features, geology, and drilling are presented. This report includes tables, maps, and illustrations.

Report issued by the Bureau of Mines over studies conducted on the Whiteware clay deposit. As stated in the introduction, "this report presents the factual data obtained by the investigation, which also includes data on trenching and drilling, and the results of some refractory tests and chemical analyses of representative samples of the clay later taken from some of the best trench exposures and from adit dumps" (p. 1-2). This report includes tables, maps, and illustrations.

Report issued by the Bureau of Mines over studies conducted on petroleum engineering in Oklahoma. Details of the drilling operations are presented. This report includes tables, maps, and illustrations.

From summary: "On the basis of the tests described herein, the corrosion characteristics of T-347 welded stainless steel are found not to be affected by the magnetic properties of the welds even though these properties are likely the result of the presence of the ferritic structure."

This report discusses properties of the Redox process. Density, apparent molar volumes and viscosity are all described.

A report which describes a number of experiments conducted to compare the effects of different methods of surface preparation on x-ray diffraction patterns of uranium obtained by the spectrometer technique.

"Charts are presented for the analysis of the stability under compression of simply supported rectangular plates with one, two, three, and an infinite number of identical equally spaced longitudinal stiffeners that have zero torsional stiffness" (p. 1).

Report in two parts: one examines the boundary conditions for an open wind tunnel with special references to the effects of the closed entrance and exit sections, while the other derives solutions of four types of two-dimensional open tunnels, including one in which the pressures on the two free surfaces are not equal.

Note presenting the method of numerical integration for calculation of beam deflection in matrix form to give it the advantages which are inherent in an influence-coefficient method. Examples are presented to show that the use of weighted matrices reduces the calculation time required to obtain a desired degree of accuracy.

Report of an investigation of the effect of forebody warp on the hydrodynamic qualities of a hypothetical flying boat with a hull length-beam ratio of 15 in smooth water and in waves. Warping the forebody planing bottom was found to appreciably increase the range of stable trim between the lower and upper trim limits of stability, although the center-of-gravity limits of stability were reduced.

"The experimental results are presented for a part of an investigation of the compressive strength of 75S-T6 aluminum-alloy flat panels with longitudinal extruded Z-section stiffeners. This part of the investigation is concerned with panels in which the ratio of the thickness of the stiffener material to the skin material varies from 0.4 to 1.0 and the ratio of stiffener spacing to skin thickness varies from 15 to 40" (p. 1).

Note presenting an investigation to determine the effect of automatic stabilization on the lateral oscillatory stability of a hypothetical supersonic airplane. The investigation included an autopilot sensitive to either the yawing or rolling angular velocity. The results of the investigation indicated that all the automatic pilots improved the stability of the original unstable short-period oscillation.

Note presenting a survey that has been made of the various systems of equations which have been given in the literature for the analysis of small deflections of thin elastic shell. A new system of equations has been derived for the analysis of shells, which includes the effects of transverse shear and normal stresses.

Report presenting a method for the calculation of flutter speed of a uniform wing carrying an arbitrarily placed concentrated mass. The method involves the solution of the differential equations of motion of the wing at flutter speed and does not require the assumption of specific normal modes of vibration.

Report presenting combined force and wake survey tests on three-blade model propellers in order to determine the effects of blade-width distribution on constant-speed efficiency characteristics. The most important result is the demonstration that blade-width distribution has a marked influence on the constant-speed efficiency characteristics of propellers.

Report presenting a wind-tunnel investigation conducted in rolling flow to determine the effects of aspect ratio and sweep on the rolling stability derivatives for a series of untapered wings. The results indicated that when the aspect ratio is held constant, an increase in sweepback angle causes a significant reduction in the damping in roll at low lift coefficients for only the higher aspect ratios tested.

Report presenting a method for the strength analysis of stiffened beam webs as applied to beams with ratios of applied shear to buckling shear less than 2.5. Results regarding critical shear stress, forced crippling failure in uprights, and web failures are provided.

"Several methods (references 1 and 2) based on gas-dynamic principles are available for reducing such measurements. The results obtained by these methods are subject to the limitation of the gas-dynamic theory which is that the mean free path of the molecules between impacts, is small with respect to the measuring device. Inasmuch as no information on the subject is to present known to be available, the purpose of the present paper is to present a method based on the concept of free-molecule theory for use in connection with this problem" (p. 1).

Report presenting an experimental investigation of a series of exhaust mufflers installed on a typical six-cylinder light-airplane engine mounted on a ground dynamometer sound. Several conclusions regarding muffler design are drawn from this testing. Since engine and propeller noise are about equal for this power-plant installation, both engine-exhaust and propeller noises must be reduced to obtain a sizable reduction in overall sound-pressure level.

Abstract: "The analysis of hafnium and zirconium by the copper spark technique is presented for solutions of HCl, HF, and HClO4 acids. The special techniques of electrode protection and vacuum drying of perchloric acid samples are outlined. Also given are the working curves and deviations of both elements."

Report discussing experiments on the photometric determination of various elements in the presence of trace amounts of Uranium.

This report describes the flow meter for measuring air-flow rate through special hoods that allow the decrease in flow rate.

Report presenting the partial differential equation for the perturbation velocity potential, which is examined for free-stream Mach numbers close to and equal to one. Under the assumptions of linearized theory, solutions can be found consistent with the theory for lifting-surface problems in stationary three-dimensional flow and in unsteady two-dimensional flow.