The proposed October 1983 EPA ambient lead criteria document, Air Quality Criteria for Lead is reviewed from the perspective of DOE's policies and programs and addresses potential impacts on energy production and energy-intensive industries. Following an introduction, the study is organized in five subsequent sections. Section 2.0 addresses environmental and health effects of exposure to lead. Section 3.0 reviews sources of lead emissions. Section 4.0 presents information on lead concentrations in ambient air. Section 5.0 examines dose-effect relationships among lead emissions, ambient air concentrations and blood lead levels. Section 6.0 presents Radian's evaluation of the regulatory implications of the criteria document and the information it provides. 10 figures, 11 tables.

The Savannah River Site has areas where soil is contaminated with metals and/or radionuclides. Many of these areas are surrounded by native vegetation which is growing adjacent to the area and where the roots have penetrated into the contaminated soil of the area. In some cases vegetation has actually invaded the contaminated area. Even though the volume of contaminated vegetation is small, there are problems associated with its disposal. Vegetation decomposes quickly after burial and the volume of buried vegetation can decrease. The voids left can lead to subsidence and possible failure of the clay cap constructed over hazardous and/or radioactive waste burial grounds. An alternative to burying the wood is to burn it and bury the ash. However, burning will introduce the contamination in the vegetation into the air where there is potential for inhalation of the contaminants. A procedure is described to assess the hazard associated with inhalation of contamination from burning of vegetation growing in contaminated soil. The procedure is applied to evaluation of the consequence of burning vegetation grown adjacent to and in the SRL Seepage Basins. The results indicate that burning the vegetation during the day could introduce a level of contaminants to the atmosphere …

Employing the current world average ..lambda../sub MS/ = 0.160 GeV as input, the minimal Georgi-Glashow SU(5) model predicts sin/sup 2/theta/sub W/(m/sub W/) = 0.214, m/sub b//m/sub tau/ approx. = 2.8 and tau/sub p/ approx. = (0.4 approx. 12) x 10/sup 29/ yr. The first two predictions are in excellent agreement with experiment; but the implied proton lifetime is already somewhat below the present experimental bound. In this status report, uncertainties in tau/sub p/ are described and effects of appendages to the SU(5) model (such as new fermion generations, scalars, supersymmetry, etc.) are examined.

Experimental data is being obtained from operating a high temperature heat pump system. The use of methanol as a working fluid will necessitate careful monitoring of refrigerant temperatures and pressures with chemical analysis performed on the working fluid during scheduled down time. Materials sent to vendors by Auburn University and quotes received by Auburn concerning equipment (compressor, evaporator, condensor, air heater, dryer, two accumulator tanks, and three expansion valves) are discussed. The simulated dryer and two accumulator tanks were designed by Auburn. The detailed design and pricing estimates are included. Additional information is presented on layout and construction; start-up; testing; shut down; scheduled maintenance and inspection; safety precautions; control system; and trouble shooting.

This report describes the results obtained by using data generated at Lawrence Livermore Laboratory's MFS Test Facility as input to the filtering and control programs developed at LBL. Graphs that illustrate the source models/filters performance, as well as some conditioning history are included. Probable sources of error are discussed.

The large land area in the center of the vast Department of Energy (DOE) Hanford Site in southeast Washington State is known as 'the plateau'--aptly named because its surface elevations are 250-300 feet above the groundwater table. By contrast, areas on the 585-square mile Site that border the Columbia River sit just 30-80 feet above the water table. The Central Plateau, which covers an ellipse of approximately 70 square miles, contains Hanford's radiochemical reprocessing areas--the 200 East and 200 West Areas--and includes the most highly radioactive waste and contaminated facilities on the Site. Five 'canyons' where chemical processes were used to separate out plutonium (Pu), 884 identified soil waste sites (including approximately 50 miles of solid waste burial trenches), more than 900 structures, and all of Hanford's liquid waste storage tanks reside in the Central Plateau. (Notes: Canyons is a nickname given by Hanford workers to the chemical reprocessing facilities. The 177, underground waste tanks at Hanford comprise a separate work scope and are not under Fluor's management). Fluor Hanford, a DOE prime cleanup contractor at the Site for the past 12 years, has moved aggressively to investigate Central Plateau waste sites in the last few years, digging more than …

Sum-frequency generation (SFG) surface vibrational spectroscopy and kinetic measurements using gas chromatography have been used to study the adsorption and hydrogenation of pyrrole over both Pt(111) and Rh(111) single-crystal surfaces at Torr pressures (3 Torr pyrrole, 30 Torr H{sub 2}) to form pyrrolidine and the minor product butylamine. Over Pt(111) at 298 K it was found that pyrrole adsorbs in an upright geometry cleaving the N-H bond to bind through the nitrogen evidenced by SFG data. Over Rh(111) at 298 K pyrrole adsorbs in a tilted geometry relative to the surface through the p-aromatic system. A pyrroline surface reaction intermediate, which was not detected in the gas phase, was seen by SFG during the hydrogenation over both surfaces. Significant enhancement of the reaction rate was achieved over both metal surfaces by adsorbing 1-methylpyrrole before reaction. SFG vibrational spectroscopic results indicate that reaction promotion is achieved by weakening the bonding between the N-containing products and the metal surface because of lateral interactions on the surface between 1-methylpyrrole and the reaction species, reducing the desorption energy of the products. It was found that the ring-opening product butylamine was a reaction poison over both surfaces, but this effect can be minimized by treating …

A kind of microwave power source, called a free-electron laser afterburner (FEL afterburner) which consists of a free-electron laser buncher and a slow-wave output structure sharing a magnetic wiggler field with the buncher, is proposed. The buncher and the slow-wave structure can operate in either a travelling-wave state or a standing-wave state. In the buncher, the wiggler field together with the radiation field makes an electron beam bunched, and in the slow-wave structure the wiggler field keeps the beam bunched while the bunched beam interacts strongly with the slow-wave structure and so produces rf power. The bunching process comes from the free-electron laser mechanism and the generating process of rf power is in a slow-wave structure. A three-dimensional, time-dependent code is used to simulate a particular standing-wave FEL afterburner and it is shown that rf power of up to 1.57 GW can be obtained, at 17.12 GHz, from a l-kA, 5-MeV electron beam.

Uruguay is in the midst of making critical decisions affecting the design of its future energy supply system. Momentum for change is expected to come from several directions, including recent and foreseeable upgrades and modifications to energy conversion facilities, the importation of natural gas from Argentina, the possibility for a stronger interconnection of regional electricity systems, the country's membership in MERCOSUR, and the potential for energy sector reforms by the Government of Uruguay. The objective of this study is to analyze the effects of several fuel diversification strategies on Uruguay's energy supply system. The analysis pays special attention to fuel substitution trends due to potential imports of natural gas via a gas pipeline from Argentina and increasing electricity ties with neighboring countries. The Government of Uruguay has contracted with Argonne National Laboratory (ANL) to study several energy development scenarios with the support of several Uruguayan institutions. Specifically, ANL was asked to conduct a detailed energy supply and demand analysis, develop energy demand projections based on an analysis of past energy demand patterns with support from local institutions, evaluate the effects of potential natural gas imports and electricity exchanges, and determine the market penetration of natural gas under various scenarios.

This is a complete (Fiscal Years 2000–2006) collection of the Idaho National Laboratory’s (INL) research and development contributions to the project, “CO2 Separation Using Thermally Optimized Membranes.” The INL scientific contribution to the project has varied due to the fluctuations in funding from year to year. The focus of the project was polybenzimidazole (PBI) membranes and developing PBI compounds (both substitution and blends) that provide good film formation and gas separation membranes. The underlying problem with PBI is its poor solubility in common solvents. Typically, PBI is dissolved in “aggressive” solvents, like N,N-dimethylacetamide (DMAc) and N methylpyrrolidone (NMP). The INL FY-03 research was directed toward making soluble N-substituted PBI polymers, where INL was very successful. Many different types of modified PBI polymers were synthesized; however, film formation proved to be a big problem with both unsubstituted and N-substituted PBIs. Therefore, INL researchers directed their attention to using plasticizers or additives to make the membranes more stable and workable. During the course of these studies, other high-performance polymers (like polyamides and polyimides) were found to be better materials, which could be used either by themselves or blends with PBI. These alternative high-performance polymers provided the best pathway forward for soluble high-temperature …

The processes of crystallization and solid deposit formation that led to the shutdown of the 2H evaporator operation at the Savannah River Site (SRS) and that could possibly cause similar problems in the future or in other evaporators need to be better understood. Through experimentation, thermodynamic modeling, and correlation of scaling to historical tank farm operations, progress has been made in developing guidelines as to the concentrations of silicon and aluminum that can be processed by evaporators while avoiding unacceptable levels of scale formation. However, because of limitations of the thermodynamic model and an insufficient amount of operational data at slightly supersaturated concentration levels, uncertainty still exists regarding acceptable feed concentrations. The objective of this effort is to provide information that can be used in defining acceptable levels of silicon and aluminum in evaporator feed solutions. Data collected previously showed that particle formation reactions can be rapid at evaporator temperatures for elevated silicon and aluminum concentrations. However, insufficient data exists to estimate the silicon and aluminum concentrations above which solids will form in the time frame of evaporator processing. The work described in this report was designed to determine the induction period for solutions of decreasing aluminum and silicon concentration …

The KDP crystals present in the final optics assembly at the National Ignition Facility (NIF) are used for conversion of infrared laser light beam into ultraviolet. The conversion is highest for a certain incident angle, the alignment of which is determined from the position of the back reflection beam, which exhibits a distinct characteristics shape. When a phase plate device is introduced before the final assembly to increase the uniformity of the beam, the back reflection pattern changes drastically. The algorithm which is best for tracking the special shaped beam is no longer suitable to track the phase modified beam. The work presented here discusses our detection schemes for both the situations. In particular, we demonstrate how the algorithm senses the modified beam using a newly proposed criterion of ''correlation peak pedestal area'' and execute an alternate algorithm in real time without operator intervention. This new algorithm continuously tracks the beam pattern to guarantee reliable and repeatable sensing. Results from simulation and real world implementation of the algorithm at the NIF facility are presented.

None

The objective of this project is to develop dense ceramic membranes that, without using an external power supply or circuitry, can produce hydrogen via coal/coal gas-assisted water dissociation. This project grew out of an effort to develop a dense ceramic membrane for separating hydrogen from gas mixtures such as those generated during coal gasification, methane partial oxidation, and water-gas shift reactions [1]. That effort led to the development of various cermet (i.e., ceramic/metal composite) membranes that enable hydrogen to be produced by two methods. In one method, a hydrogen transport membrane (HTM) selectively removes hydrogen from a gas mixture by transporting it through either a mixed protonic/electronic conductor or a hydrogen transport metal. In the other method, an oxygen transport membrane (OTM) generates hydrogen mixed with steam by removing oxygen that is generated through water splitting [1, 2]. This project focuses on the development of OTMs that efficiently produce hydrogen via the dissociation of water. Supercritical boilers offer very high-pressure steam that can be decomposed to provide pure hydrogen by means of OTMs. Oxygen resulting from the dissociation of steam can be used for coal gasification, enriched combustion, or synthesis gas production. Hydrogen and sequestration-ready CO{sub 2} can be produced …

The effect on mathematics of collaborations between high-energy theoretical physics and modern mathematics has been remarkable. Mirror symmetry has revolutionized enumerative geometry, and Seiberg-Witten invariants have greatly simplified the study of four manifolds. And because of their application to string theory, physicists now need to know cohomology theory, characteristic classes, index theory, K-theory, algebraic geometry, differential geometry, and non-commutative geometry. Much more is coming. We are experiencing a deeper contact between the two sciences, which will stimulate new mathematics essential to the physicists’ quest for the unification of quantum mechanics and relativity. Our grant, supported by the Department of Energy for twelve years, has been instrumental in promoting an effective interaction between geometry and string theory, by supporting the Mathematical Physics seminar, postdoc research, collaborations, graduate students and several research papers.

Perpendicular electron-cyclotron emission (PECE) from relativistic (T/sub H/ approx. 100 to 400 keV) hot electrons within the thermal-barrier region of TMX-U is detected at 35, 60, 94 and 98 GHz. For the operating regime of TMX-U these signals are optically thin (tau<<1) and thus proportional to the radial hot electron line density. A relativistic code is used to calculate the theoretical temperature dependence of the perpendicular emission coefficient, j perpendicular(..omega..,T/sub H/), for each of the detected frequencies. This dependence has been verified experimentally by x-ray measurements of the hot electron temperature, T/sub H/. The observed qualitative agreement demonstrates that optically thin PECE signals can be used to determine the temporal evolution of T/sub H/. An inability to absolutely calibrate the present PECE waveguide system has prevented quantitative agreement.

We discuss the possibility of achieving energy, power and power density necessary for ICF by magnetically accelerating plasma confined by a compact torus (CT) field configuration. The CT, which consists of a dipole (poloidal) field and imbedded toroidal field formed by force-free, plasma current, is compressed and accelerated between coaxial electrodes by B/sub THETA/ fields as in a coaxial railgun. Compression and acceleration over several meters by a 9.4 MJ capacitor bank is predicted to give a 5.7 cm radius, 0.001 gm CT 5 MJ kinetic energy (10/sup 7/ m/sec). Transport and focussing several meters by a disposable lithium pipe across the containment vessel is predicted to bring 4.8 MJ into the pellet region in 0.5 cm/sup 2/ area in 0.3 ns. The high efficiency (approx.50%) and high energy delivery of the CT accelerator could lead to low cost, few hundred MW power plants that are economically viable.

Neutral molecular densities just outside the plasma edge are measured at 11 axial locations in Tandem Mirror Experiment-Upgrade (TMX-U). These densities are time dependent and vary greatly with different modes of TMX-U plasma operation. The densities are low in the ion-cyclotron resonance heated central cell because of plasma pumping. The density is high in the plug near the sloshing-ion turning point. These densities are measured with a combination of new retractable, and fixed, magnetically unshielded Bayard-Alpert gauges that can be oriented to provide calibrated operation in the high (7-kG) MX-U magnetic fields. The role of the neutral density in simultaneously fueling and charge exchanging away the plug density is modeled using SMOKE, a Fokker-Planck code.

To help identify the major sources of fueling gas in Tandem Mirror Experiment-Upgrade (TMX-U), we mounted a mass-sensitive, E parallel B, end-loss ion spectrometer (ELIS) near the machine's centerline. We set the electric field in the ELIS to simultaneously measure the axial loss currents of both hydrogen and deuterium. We then initiated plasma discharges, where we injected either hydrogen or deuterium gas into the central cell. We also selected and deselected the central-cell neutral beams that were fueled with hydrogen gas. The end-cell neutral beams were always selected and fueled with deuterium. By taking the ratio of the hydrogen end-loss current to the deuterium end-loss current (with a known deuterium-gas feed rate), we were able to infer the effective fueling rates that were due to wall reflux, central-cell beams, and end-cell beams. The results were the following: wall reflux, 6 Torr x 1/s; central-cell beams, 15 Torr x 1/s; and end-cell beams 1 Torr x 1/s.

To help identify the major sources of fueling gas in Tandem Mirror Experiment-Upgrade (TMX-U), we mounted a mass-sensitive, E parallel to B, end-loss ion spectrometer (ELIS) near the machine's centerline. We set the electric field in the ELIS to simultaneously measure the axial loss currents of both hydrogen and deuterium. We then initiated plasma discharges, where we injected either hydrogen or deuterium gas into the central cell. We also selected and deselected the central-cell neutral beams that were fueled with hydrogen gas. The end-cell neutral beams were always selected and fueled with deuterium. By taking the ratio of the hydrogen end-loss current to the deuterium end-loss current (with a known deuterium-gas feed rate), we were able to infer the effective fueling rates that were due to wall reflux, central-cell beams, and end-cell beams. The results were the following: wall reflux, 6 Torr.l/s; central-cell beams, 15 Torr.l/s; and end-cell beams 1 Torr.l/s. 3 refs., 3 figs., 1 tab.

The Mirror Fusion Test Facility (MFTF-B) at Lawrence Livermore National Laboratory requires state-of-the-art structural-mechanics methods to deal with access constraints for plasma heating and diagnostics, alignment requirements, and load complexity and variety. Large interactive structures required an integrated analytical approach to achieve a reasonable level of overall system optimization. The Tandem Magnet Generator (TMG) creates a magnet configuration for the EFFI calculation of electromagnetic-field forces that, coupled with other loads, form the input loading to magnet and vessel finite-element models. The analytical results provide the data base for detailed design of magnet, vessel, foundation, and interaction effects.

Over the past three years, the total TMX-U diagnsotic data base has grown to exceed 10 megabytes from over 1300 channels; roughly triple the originally designed size. This acquisition and processing load has resulted in an experiment repetition rate exceeding 10 minutes per shot using the five original Hewlett-Packard HP-1000 computers with their shared disks. Our new diagnostics tend to be multichannel instruments, which, in our environment, can be more easily managed using local computers. For this purpose, we are using HP series 9000 computers for instrument control, data acquisition, and analysis. Fourteen such systems are operational with processed format output exchanged via a shared resource manager. We are presently implementing the necessary hardware and software changes to create a local area network allowing us to combine the data from these systems with our main data archive. The expansion of our diagnostic system using the paralled acquisition and processing concept allows us to increase our data base with a minimum of impact on the experimental repetition rate.

We describe a simple electrostatic focusing method which efficiently damps transverse motion of a high-intensity (both high current and high particle energy) electron beam. The principle is to create an electrostatic central force anharmonic potential field which phase-mix damps transverse beam motion into increased beam emittance. The non-linear electrostatic field is created by a very resistive wire (L/R time approx. 2 ns) strung axially down the accelerator vacuum pipe. Positive-image charge equal to approx. 1/2 the negative-beam charge is induced onto the wire. Since the beam self fields cancel to within 1/..gamma../sup 2/, the resultant wire electric field dominates. Experimental results showing the guiding, focusing and damping of transverse motion will be presented.

This paper describes various upgrades and tests done at the Research Division 500 kW Transrex power supply dc current transductors and chassis. The results of all modifications were measured on the same test setup with the same transductor head and chassis. Field testing of over one-hundred power supplies indicated that the results given in this paper are similar to the signals observed in the field within a factor of + or {minus} two. The dc transductors yield 10Vdc burden resistor voltage at 5000 A load current.