From summary: "On the basis of the tests described herein, the corrosion characteristics of T-347 welded stainless steel are found not to be affected by the magnetic properties of the welds even though these properties are likely the result of the presence of the ferritic structure."

Storage of the fission products separated from the product streams of the Purex process is being accomplished using a smaller volume of accompanying solution than any other process here-to-fore used at HAPO. The operating technique and control mechanisms which are needed to store large quantities of these highly radioactive wastes are not yet fully understood, but considerable insight into the problem has been gained from the experience at Redox during the last 36 months. The basic intentions of the 241-A Storage Facility design is to control the boiling wastes by providing suitable tanks to contain the liquid and a vapor system provided with suitable seals to control the vapors. This document (Part I) will present a somewhat detailed description of the Purex Storage Facility and a review of the activities there before plant start-up. Part II, published under separate cover, contains a description of Waste Farm Technology including a process description and a recommended plan for operation.

Considerable interest has been shown at HAPO in the development of a continuous ion exchange process for concentrating plutonium solutions. Development work has been performed on continuous ion exchange for both uranium and plutonium concentrations at the X-10 at ORNL. On a recent trip to Oak Ridge to discuss critical mass problems and experiments with Dr. A. D. Callihan of the ORNL critical mass facility, a meeting was also held with C. W. Hancher and R. Higgins of X-10 regarding continuous ion exchange operation. From this meeting, information was obtained that is helpful to work out nuclear safety aspects of such a plant for the concentration of plutonium solutions. An advance copy of "Countercurrent Ion Exchange" by T. A. Arehart, J. C. Bresee, C. W. Hancher, and S. H. Jury was obtained. This paper is to be presented at an AIChE meeting this fall. Preliminary blue prints of ORNL-3" Ion Exchange column design were also obtained. Upon my return to HAPO, a meeting was held with members of the Process Planning, Equipment Development, and Chemical Engineering Development Units of the Chemical Engineering Sub-Section (Separations Technology) to present the document and blue prints on continuous ion exchange and arrive at a …