The U.S. Department of Energy (DOE) supports an applied superconductivity program entitled ''Superconductivity Program for Electric Power Systems.'' Activities within this program contribute to development of the high-temperature superconductor (HTS) technology needed for industry to proceed with the commercial development of electric power applications such as motors, generators, transformers, transmission cables, and current limiters. Research is conducted in three categories: wire development, systems technology development, and Superconductivity Partnership Initiative (SPI). Wire development activities are devoted to improving the critical current density (J{sub c}) of short-length HTS wires, whereas systems technology development focuses on fabrication of long-length wires, coils, and on magnets. The SPI activities are aimed at development of prototype products. Significant progress has been made in the development of (HTSs) for various applications: some applications have already made significant strides in the marketplace, while others are still in the developmental stages. For successful electric power applications, it is very important that the HTS be fabricated into long-length conductors that exhibit desired superconducting and mechanical properties. Several parameters of the PIT technique must be carefully controlled to obtain the desired properties. Long lengths of Bi-2223 tapes with respectable superconducting properties have been fabricated by a carefully designed thermomechanical treatment process. …

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information.

This manual describes a set of tools that can be used to develop software for EPICS based control systems. It provides the following features: Multiple applications; the entire system is composed of an arbitrary number of applications: Source/Release Control; all files created or modified by the applications developers can be put under sccs (a UNIX Source/Release control utility): Multiple Developers; it allows a number of applications developers to work separately during the development phase but combine their applications for system testing and for a production system; Makefiles: makefiles are provided to automatically rebuild various application components. For C and state notation programs, Imagefiles are provided.

Microbeam Technologies Incorporated (MTI) is working with Prairie View to develop and demonstrate a new method to remove deposits from coal-fired utility boilers. MTI is providing background information on fuel properties, ash formation, ash deposition, and ash removal. In addition, MTI is providing deposits collected from a full scale utility boilers. Ash deposits on fireside heat exchange surfaces of power plants significantly decrease plant efficiency and are aggravated by variability in coal quality. Deposit formation is related to coal quality (chemical and physical characteristics of the inorganic material), system operating conditions, and system design. Variations in coal quality can significantly influence ash deposition on heat transfer surfaces resulting in decreased plant performance and availability. Ash accumulations on heat transfer surfaces require annual or semi-annual shutdowns for cleaning which result in cleaning costs and lost revenues from being off-line. In addition, maintaining slag flow in wet bottom boilers and cyclone-fired boilers can require co-firing of other fuels and outages to remove frozen slag resulting in decreased efficiency and availability. During this reporting period MTI performed analysis of deposits collected from full-scale utility boilers. Deposit samples were obtained from Basin Electric and from Northern States Power (NSP). The analyses were conducted using …

New computational physics methods for estimating constitutive property parameterizations in ground water aquifers were developed and demonstrated in this project. The dynamical and statistical axioms of physics, embodied in partial differential equations (PDES) of kinetic theory, are employed to constrain interpolations of hydraulic head (pressure) and transmissivity (permeability) between sparsely measured datum points. These methods can apparently be applied in numerous approaches to parameter estimation. To demonstrate the basic concepts and techniques developed in this work, examples are considered for steady-state, two-dimensional, heterogeneous, ground water flow models, given (i) discrete borehole observations of hydraulic head and transmissivity and (ii) governing kinetic equations for Darcy flow behavior. Estimations of spatially dependent parameters from sparsely measured data are treated as mathematically ill- posed problems because infinitely many parameter distributions (realizations) that are consistent with the data generally exist. Potential difficulties associated with ill-posedness in mean flow realizations are mitigated by requiring that acceptable realizations respect the observed data, are solutions of forward and inverse PDEs for physical continuity, respect information sampling principles, and are distributed by spatial interpolations that themselves are optimal solutions of the governing PDEs between measured datum points. To accomplish these requisites, adaptive numerical grid Galerkin techniques were applied …

This supporting document has been prepared to make the Kaiser Engineers Hanford Company Project W-320 Tank 106-C Waste Retrieval Study Analysis Session Report readily retrievable. This facilitated session was requested by Westinghouse Hanford Company (WHC) to review the characterization data and select the best alternatives for a double-shell receiver tank and for a sluicing medium for Tank 106-C waste retrieval. The team was composed of WHC and Kaiser Engineers Hanford Company (KEH) personnel knowledgeable about tank farm operations, tank 106-C requirements, tank waste characterization and analysis, and chemical processing. This team was assembled to perform a structured decision analysis evaluation and recommend the best alternative-destination double-shell tank between tanks 101-AY and 102-AY, and the best alternative sluicing medium among dilute complexant (DC), dilute noncomplexant (DNC), and water. The session was facilitated by Richard Harrington and Steve Bork of KEH and was conducted at the Bookwalter Winery in Richland from 7:30 a.m. to 4:00 p.m. from July 27 through July 29, 1993. Attachment 1 (Scope Statement Sheet) identifies the team members, scope, objectives, and deliverables for the session.

Engineering Work Requests ESE-48 & 49 established a program for performance of Qualification Approval Tests on RPC`s 0.2 and 40 meghom Carbon Composition Resistors. This report is an accounting of these tests wherein (50) samples of each component were subjected to QA tests per drawings 8O2C250 and 802C251. Tests are explained and results tabulated.

This report itemizes the irradiations performed by Testing and Irradiation Services for Battelle-Northwest. It lists the material being irradiated, awaiting disposition and material shipped during the report period. Specific data given is TISR No., Request number, Material, Piece number, operating time, CMK Absorbed, charge date, location, exposure to date, discharge date and time, and shipping date.

This study was undertaken at the request of the Hanford Works to investigate the possibility of detecting 3/8 inch diameter boron-steel control-balls which become lodged within cracks between the graphite blocks of an atomic pile. The cracks concerned occur radially from 4 3/16 inch diameter holes which pass vertically through the pile. The problem is complicated by the following facts: The graphite blocks are conducting and will therefore give rise to spurious signals primarily due to the cracks between blocks. Numerous aluminum tubes containing water and bars of uranium pass horizontally through the pile at distances closer to the hole than the ball at its extreme position. The vertical holes themselves are warped in an arbitrary manner. Calculations were made to determine theoretically whether or not the ball could be detected. Best operating frequency and coil design were also determined. Tests were made utilizing a specially designed search coil and a test section of graphite pile. Measurements of particle voltage vs. position relative to the coil were made and compared with that resulting from the graphite.

The Hanford Site, located adjacent to and north of Richland, Washington, is operated by the US Department of Energy, Richland Operations Office (RL). The 324 Building is located in the 300 Area of the Hanford Site. The 324 Building was constructed in the 1960s to support materials and chemical process research and development activities ranging from laboratory/bench-scale studies to full engineering-scale pilot plant demonstrations. In the mid-1990s, it was determined that dangerous waste and waste residues were being stored for greater than 90 days in the 324 Building Radiochemical Engineering Cells (REC) and in the High-Level Vault/Low-Level Vault (HLV/LLV) tanks. [These areas are not Resource Conservation and Recovery Act of 1976 (RCRA) permitted portions of the 324 Building.] Through the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-89, agreement was reached to close the nonpermitted RCRA unit in the 324 Building. This closure plan, managed under TPA Milestone M-20-55, addresses the identified building areas targeted by the Tri-Party Agreement and provides commitments to achieve the highest degree of compliance practicable, given the special technical difficulties of managing mixed waste that contains high-activity radioactive materials, and the physical limitations of working remotely in the areas within the subject …

The Spent Nuclear Fuel MCO is a single-use container that consists of a cylindrical shell, five to six fuel baskets, a shield plug, and features necessary for maintaining the structural integrity of the MCO while providing criticality control and fuel processing capability.

The National Ignition Facility (NIF), being constructed at Lawrence Livermore National Laboratory (LLNL), comprises 192 laser beams, Figure 1. The lasing medium is neodymium in phosphate glass with a fundamental frequency (1{omega}) of 1.053 {micro}m. Sum frequency generation in a pair of conversion crystals (KDP/KD*P) produces 1.8 Mj of the third harmonic light (3{omega} or {lambda}=0.35). On NIF the frequency conversion crystals are part of the Final Optics Assembly (FOA), whose two principal functions are to convert the laser light to 3{omega} and focus it on target. In addition, the FOA provides a vacuum window to the target chamber, smoothes the on- target irradiance profile, moves the unconverted light away from the target, and provides signals for alignment and diagnostics. The FOA has four Integrated Optics Modules (IOM), Figure 4, each of which contains two 41 cm square crystals are mounted with the full edge support to micro radian angular and micron flatness tolerances. This paper is intended to be an overview of the important factors that affect frequency conversion on NIF. Chief among these are angular errors arising from crystal growth, finishing, and mounting. The general nature of these errors and how they affect frequency conversion, and finally the …

The three-dimensional mechanical behavior of thick Spectra/epoxy sonar window materials containing various special materials is summarized in this report. Three different materials, which were fabricated by two companies known as `A` and `B` were received from the Naval Warfare Center. The three materials designated `A with microspheres (A micron),` `A without microspheres (A),` and `B` were measured for all properties. The total number of tests was reduced through the assumption that the two orthogonal, in-place directions were identical. Consequently, these materials should have only six independent elastic variables. The measured constants and strengths are given.

Traditional gamma safeguards measurements have usually been performed using a segmented gamma scanning (SGS) system. The accuracy of this technique relies on the assumption that the sample matrix and the activity are both uniform for a segment. Waste barrels are often highly heterogeneous, span a wide range of composition and matrix type. The primary sources of error are all directly or indirectly related to a non-uniform measurement response associated with unknown radioactive source spatial distribution and heterogeneity of the matrix. These errors can be significantly reduced by some imaging techniques that measure exact spatial locations of sources and attenuation maps. In this paper we describe a joint R&D effort between the Lawrence Livermore National Laboratory (LLNL) and the Institute of Nuclear Techniques (INT) of the Technical University, Budapest, to compare results obtained by two different gamma-ray nondestructive assay (NDA) systems used for imaging waste barrels. The basic principles are the same, but the approaches are different. Key factors to judge the adequacy of a method are the detection limit and the accuracy. Test drums representing waste to be measured are used to determine basic parameters of these techniques.

Since the Federal Energy Regulatory Commission issued its landmark open access transmission rule in 1996, the idea of creating and establishing independent system operators (ISOs) has gained momentum. ISOs may help combine individual utility transmission systems into more regional transmission networks, which ultimately will allow biomass companies to transmit power over longer distances while paying a single transmission rate. To the extent that ISOs are combined or operated with power exchanges, however, biomass companies will likely face even more competitive market pressures. Few operators have experience with ISOs and power exchanges, but preliminary results show that short-term electricity market prices are probably too low for most biomass companies to compete against. Without policy measures, biomass companies may have to pursue strategic opportunities with short-term, spot-market sales; direct bilateral sales to customers; alternative power exchanges; and perhaps a ''green'' pow er market and sales to ancillary service markets. In addition, prices will likely be more volatile in a restructured market so biomass generators should be selling during those times.

The HSV in storage in MTF has been monitored during FY98, and its overpressure has been sampled and analyzed.

It is likely that aging is affecting the radiation hardness of stockpile electronics, and we have seen apparent examples of aging that affects the electronic radiation hardness. It is also possible that low-level intrinsic radiation that is inherent during stockpile life will damage or in a sense age electronic components. Both aging and low level radiation effects on radiation hardness and stockpile reliability need to be further investigated by using both test and modeling strategies that include appropriate testing of electronic components withdrawn from the stockpile.

Boiler slagging and fouling as a result of inorganic impurities in combustion gases being deposited on heat transfer tubes have caused severe problems in coal-fired power plant operation. These problems are fuel, system design, and operating condition dependent. Pulse detonation technology for the purpose of removing slag and fouling deposits in coal-fired utility power plant boilers offers great potential. The detonation wave technique based on high impact velocity with sufficient energy and thermal shock on the slag deposited on gas contact surfaces offers a convenient, inexpensive, yet efficient and effective way to supplement existing slag removal methods. These detonation waves have been demonstrated experimentally to have exceptionally high shearing capability important to the task of removing slag and fouling deposits. The experimental results show that the single shot detonation wave is capable of removing the entire slag (types of slag deposited on economizer) even at a distance of 8 in. from the exit of a detonation engine tube. Wave strength and slag orientation also have different effects on the chipping off of the slag. This paper discusses about the results obtained in effectively removing the economizer slag.

The Old Radioactive Waste Burial Ground (ORWBG, 643-E) contains 22 old solvent tanks (S1 - S22) which were used to receive and store spent PUREX solvent from F- and H-Canyons. The tanks are cylindrical, carbon-steel, single-wall vessels buried at varying depths. A detailed description of the tanks and their history can be found in Reference 1. A Sampling and Analysis Plan for the characterization of the material contained in the old solvent tanks was developed by the Analytical Development Section (ADS) in October of 19972. The Sampling and Analysis Plan identified several potential disposal facilities for the organic and aqueous phases present in the old solvent tanks which included the Solvent Storage Tank Facility (SSTF), the Mixed Waste Storage Facilities (MWSF), Transuranic (TRU) Pad, and/or the Consolidated Incineration Facility (CIF). In addition, the 241-F/H Tank Farms, TRU Pads, and/or the MWSF were identified as potential disposal facilities for the sludge phases present in the tanks. The purpose of this sampling and characterization was to obtain sufficient data on the material present in the old solvent tanks so that a viable path forward could be established for the closure of the tanks. Therefore, the parameters chosen for the characterization of the …

The third generation Advanced Light Source (ALS) produces extremely bright and finely focused photon beams using undulatory, wigglers, and bend magnets. In order to position the photon beams accurately, a slow global orbit feedback system has been developed. The dominant causes of orbit motion at the ALS are temperature variation and insertion device motion. This type of motion can be removed using slow global orbit feedback with a data rate of a few Hertz. The remaining orbit motion in the ALS is only 1-3 micron rms. Slow orbit feedback does not require high computational throughput. At the ALS, the global orbit feedback algorithm, based on the singular valued decomposition method, is coded in MATLAB and runs on a control room workstation. Using the MATLAB environment to develop, test, and run the storage ring control algorithms has proven to be a fast and efficient way to operate the ALS.

A theory of tapered laser cooling for fast circulating ion beams in a storage ring is constructed. The authors describe the fundamentals of this new cooling scheme, emphasizing that it might be the most promising way to beam crystallization. The cooling rates are analytically evaluated to study the ideal operating condition. They discuss the physical implication of the tapering factor of cooling laser, and show how to determine its optimum value. Molecular dynamics method is employed to demonstrate the validity of the present theory.

The assembly of an optical system requires the correction of aberrations in the entire imaging field by making selected rigid-body motions of the optical elements. We present a rigorous method for determining which adjustment motions, called compensators, to use for alignment. These compensators are found by employing techniques from linear algebra that choose the most independent vectors from a set which are interdependent. The method finds the smallest number of compensators to correct for misalignments of a given magnitude. As an example the method is applied to a four-mirror scanning ring-field EUV lithography system. It is shown that out of 32 degrees of freedom in the configuration of the optical elements, only eight compensators are required on the optics. By adjusting these compensators a misaligned configuration giving a 30 {lambda} wavefront error can be assembled to {lambda}/50 in the absence of measurement noise.

The author had accomplished the expertise for I-125-HSA plasma volume, galactose clearance for determination of hepatic plasma flow as well as finalizing the kinetic model. They have just completed modifying the microscale Scatchard assay for greater precision of receptor measurement using only 5--10 mg of liver tissue. In addition, he determined during the past year that the most practical method and clinically reasonable measurement of liver volume was to measure the transplanted liver in vivo using Tc-NGA images in the anterior, posterior, and right lateral projections, using the method of Rollo and DeLand. Direct measurement of liver weight obtained during transplant operation was not reliable due to variability of fluid retention in the donor liver secondary to ischemia, preservation fluid, etc., which thereby did not reflect an accurate liver weight which is needed in the kinetic analysis comparison, i.e., V{sub h} (hepatic plasma volume).

This report was submitted to meet the requirements of Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-26-011. This milestone requires the preparation of an annual report that covers characterization, treatment, storage, minimization, and other aspects of managing land-disposal-restricted mixed waste at the Hanford Facility.