Zero-Lift Drag of Several Conical and Blunt Nose Shapes Obtained in Free Flight at Mach Numbers of 0.7 to 1.3 (open access)

Zero-Lift Drag of Several Conical and Blunt Nose Shapes Obtained in Free Flight at Mach Numbers of 0.7 to 1.3

Report presenting the zero-lift drag characteristics of seven nose shapes on a slender body of revolution in free flight between the Mach numbers of 0.7 and 1.3. Some of the nose shapes included a spherical segment, flat face with a sharp shoulder, flat face with a rounded shoulder, 30 degree and 40 degree total-angle cones, and a spherical segment with two different length spikes. Results regarding drag coefficients and performance for the various shapes are provided.
Date: March 23, 1954
Creator: Piland, Robert O. & Putland, Leonard W.
System: The UNT Digital Library
Wind-Tunnel Investigation at High Subsonic Speeds of the Effects of Wing-Mounted External Stores on the Loading and Aerodynamic Characteristics in Pitch of a 45 Degree Sweptback Wing Combined With a Fuselage (open access)

Wind-Tunnel Investigation at High Subsonic Speeds of the Effects of Wing-Mounted External Stores on the Loading and Aerodynamic Characteristics in Pitch of a 45 Degree Sweptback Wing Combined With a Fuselage

Report presenting an investigation of the effect of wing-mounted external stores on the loading and aerodynamic characteristics in pitch of a 45 degree sweptback wing combined with a fuselage. Store arrangements investigated consisted of stores mounted at the wing tips, stores mounted inboard on the wing undersurface at 46-percent semispan, and stores in both the tip and inboard locations.
Date: March 23, 1954
Creator: Silvers, H. Norman & King, Thomas J., Jr.
System: The UNT Digital Library
MEETING XIII -- BEVATRON RESEARCH CONFERENCE -- TARGET AREA MODIFICATIONS (open access)

MEETING XIII -- BEVATRON RESEARCH CONFERENCE -- TARGET AREA MODIFICATIONS

The following modifications are planned to facilitate greater usefulness of available target space in the west tangent tank: (1) A 3/32-inch x 6-inch x 106-inch aluminum window is to be added to the outer radius tank wall. (2) One 12-inch x 6-inch air lock is to be added on the inside centerline of the reentrant section on the west tangent tank. (3) Two 24-inch x 30-inch openings are to be cut on the beam centerline in the top of the west tangent tank, one at each end. These openings will accommodate photographic plate wells of various kinds and also a large air lock that is being designed. It is suggested that any other modifications to the target area be presented to E. Lofgren as soon as possible so that the modifications can be programmed with respect to operations. The same general policy holds for target location, viz: (a) Small targets - allocations in west tangent tank; and (b) Large targets - allocations in south tangent tank. The design of two general purpose magnets is in the final stages. Copper for the coils will be ordered soon. The characteristics of these magnets are given. Results of magnetic field measurements on the …
Date: March 23, 1954
Creator: Chupp, Warren
System: The UNT Digital Library
A Capacitive Manometer (open access)

A Capacitive Manometer

None
Date: March 23, 1954
Creator: Jamieson, R. S.
System: The UNT Digital Library
Meson Mass Measurements III : The Pi-Mu Mass Ratio and Energy Balance in Pion Decay (open access)

Meson Mass Measurements III : The Pi-Mu Mass Ratio and Energy Balance in Pion Decay

From introduction: "This article constitutes the third of a series of three papers on the "direct" measurements of the meson masses by the "Hp vs. Range" mass ratio method...The study here reported is a logical extension of the pion-proton mass ratio technique."
Date: March 23, 1954
Creator: Birnbaum, Wallace
System: The UNT Digital Library
Chelating Agents Applied to Ion Exchange Separations of Americium and Curium (open access)

Chelating Agents Applied to Ion Exchange Separations of Americium and Curium

The following report analyzes results from studies made while applying chelating agents to ion exchange separations of the elements americium and curium.
Date: March 23, 1954
Creator: Glass, Richard A.
System: The UNT Digital Library
Hanford Atomic Products Operation monthly report, February 1954 (open access)

Hanford Atomic Products Operation monthly report, February 1954

This is a progress report of the production reactors on the Hanford Reservation for the month of February 1951. This report takes each division (e.g., manufacturing, medical, accounting, occupational safety, security, reactor operations, etc.) of the site and summarizes its accomplishments and employee relations for that month.
Date: March 23, 1954
Creator: McCune, F. K.
System: The UNT Digital Library