We have initiated an investigation of the utility of marine plankton as bioconcentrating samplers of low-level marine radioactivity in the southern hemisphere. A literature review has shown that both freshwater and marine plankton have trace element and radionuclide concentration factors (relative to water) of up to 10/sup 4/. We participated in Operations Deepfreeze 1981 and 1982, collecting a total of 48 plankton samples from the USCGC Glacier on its Antarctic cruises. Battelle Pacific Northwest Laboratories sampled air, water, rain, and fallout. We were able to measure concentrations in plankton of the naturally-occurring radionuclides /sup 7/Be, /sup 40/K, and the U and Th series, and we believe that we have detected low levels of /sup 144/Ce and /sup 95/Nb in seven samples ranging as far south as 68/sup 0/. Biological identification of the plankton suggests a possible correlation between radionuclide concentration and the protozoa content of the samples. 7 references, 5 figures.

Fine axial flutes enhance heat transfer in vertical shell-and-tube exchangers with water inside the tubes and ammonia evaporating or condensing in layer flow on the shell side. Single-tube experiments with R-11 and ammonia indicate local shell-side coefficients 3 to 5 times those for corresponding smooth tubes. Single-tube experiments with water indicate that at moderate velocities the tube-side coefficients are enhanced by a factor equal to the ratio of fluted-to-smooth surface areas while the fluid friction is similarly increased. The experimental data are transformed into mean individual coefficients for ammonia and water. Overall coefficients for a particular case are presented to illustrate the efficacy of enhancement by flutes on one or both sides of the heat transfer surface. Means are described for using emerging data to predict the static and dynamic behavior of the power cycle and the interactions of components throughout the complete power plant.

Extraction, or reverse-phase partition chromatography, as used mostly for analytical separations, employs an organic solvent extractant as a stationary phase on an inert support material. This technique, which has the advantage of utilizing the versatility of solvent extraction systems with the less expensive operation of ion exchange equipment, was evaluated for a process to recover low level concentrations of americium from acidic process waste streams at Rocky Flats. The bidentate organophosphorous extractant DHDECMP (dihexyl-N, N-diethylcarbamylmethylene phosphonate) was used as the stationary phase since it was shown to effectively scavenge americium from acidic waste streams without significantly extracting impurity ions. Over 30 support materials were evaluated for DHDECMP capacity and for their ability to retain the extractant. Of the supports tested, the Amberlite XAD macroreticular sorbents were found to have the highest DHDECMP capacity. Amberlite XAD-4 beads retained the extractant significantly better than the other supports evaluated. Thus, this solvent was tested for americium breakthrough capacity and compared to the theoretical capacity.

Several safety parameters are calculated for a large, fast, Na-cooled, oxide-fueled reactor. The Doppler coefficient is studied as regards its effect on the reactivity during a power excursion, and its dependence on the neutron spectrum, on the concentrations of U/sup 238/, Pu /sup 239/ , a nd Pu/sup 240/, on spatial temperature and power distributions, and on temperature. Other parameters studied include the Na temperature coefficient of reactivity, and the reactivity insertion caused by total Na loss; reactivity coefficients caused by thermal expansion of fuel and steel cladding; the excess operating reactivity; and the reactivity caused by a fuel slump. The effects of a Be reflector on neutron lifetimes are determined. The safety aspects are balanced against economic considerations. (T.F.H.)

To avoid the effects of fluid instabilities, stringent requirements must be imposed on the surface quality and wall thickness uniformity of fuel pellets used in Inertial Confinement Fusion compression experiments. A systematic method was developed for specifying the type of defects which must be avoided and for evaluating measurement techniques for their suitability for detecting these defects. A review is given of the techniques currently available and those under development to show the relationship between these capabilities and the current and future requirements for pellet uniformity. The speed of these techniques and the implications for automated production of fuel pellets for a reactor are discussed.

The objective is to develop and test various integrated solar heating, cooling and domestic hot water systems, and to evaluate their performance. Systems composed of new, as well as previously tested, components are carefully integrated so that effects of new components on system performance can be clearly delineated. The SEAL-DOE program includes six tasks which have received funding for the 1991--92 fifteen-month period. These include: (1) a project employing isothermal operation of air and liquid solar space heating systems, (2) a project to build and test several generic solar water heaters, (3) a project that will evaluate advanced solar domestic hot water components and concepts and integrate them into solar domestic hot water systems, (4) a liquid desiccant cooling system development project, (5) a project that will perform system modeling and analysis work on solid desiccant cooling systems research, and (6) a management task. The objectives and progress in each task are described in this report.

The purpose of this work is to examine the environmental, safety, health and operational aspects of detonating a confined explosive test apparatus that has been designed to maximize the dynamics of impact on beryllium metal components for Contained Firing Facility (CFF) applications. A combination of experimental collection and evaluation methods were designed and implemented to provide an evaluation of immediately postdetonation by-products reflecting a potential worst-case scenario beryllium aerosolization explosive event. The collective Material Evaluation Test Series (METS) 04 - 06 provided explosive devices designed to scale for the dedicated METS firing tank that would provide a post-detonation internal environment comparable to the CFF. The experimental results provided appropriate information to develop operational parameters to be considered for conducting full-scale beryllium-containing experimental tests with similar designs within CFF and B801A. These operational procedures include the inclusion of chelating agents in pre-shot CFF cardboard containers with a minimum of 600 gallons content, an extended time period post-test before purging the CFF chamber, and an adaptation of approaches toward applications of the scrubber and HEPA systems during the post-shot sequence for an integrated environmental, safety, and health approach. In addition, re-entry and film retrieval procedures will be adapted, in line with abatement …

We report Stark shift measurements for {sup 121}Sb donor electron spins in silicon using pulsed electron spin resonance. Interdigitated metal gates on top of a Sb-implanted {sup 28}Si epi-layer are used to apply electric fields. Two Stark effects are resolved: a decrease of the hyperfine coupling between electron and nuclear spins of the donor and a decrease in electron Zeeman g-factor. The hyperfine term prevails at X-band magnetic fields of 0.35T, while the g-factor term is expected to dominate at higher magnetic fields. A significant linear Stark effect is also resolved presumably arising from strain.

None

We present results from an extensive spectroscopic survey, carried out with FORS on the ESO Very Large Telescope, and from an extensive multi-wavelength imaging data set from the Advanced Camera for Surveys and ground based facilities of the cluster of galaxies RDCS J1252.9-2927. We have spectroscopically confirmed 38 cluster members in the redshift range 1.22 < z < 1.25. The distribution in velocity of these spectroscopic members yields a cluster median redshift of z = 1.237 and a rest-frame velocity dispersion of 747{sub -84}{sup +74} km s{sup -1}. Star-forming members are observed to mainly populate the outskirts of the cluster while passive galaxies dominate the central cluster region. Using the 38 confirmed redshifts, we were able to resolve, for the first time at z > 1, kinematic structure. The velocity distribution, which is not Gaussian at the 95% confidence level, is consistent with two groups that are also responsible for the projected elongation of the cluster in the East-West direction. The groups are composed of 26 and 12 galaxies and have velocity dispersions of 486{sub -85}{sup +47} km s{sup -1} and 426{sub -105}{sup +57} km s{sup -1}, respectively. The elongation is also seen in the intracluster gas (from X-ray observations) …

The charge-state-resolved ion energy distributions (IEDs) in filtered aluminum vacuum arc plasmas were measured and analyzed at different oxygen and argon pressures in the range 0.5 8.0 mTorr. A significant reduction of the ion energy was detected as the pressure was increased, most pronounced in an argon environment and for the higher charge states. The corresponding average charge state decreased from 1.87 to 1.0 with increasing pressure. The IEDs of all metal ions in oxygen were fitted with shifted Maxwellian distributions. The results show that it is possible to obtain a plasma composition with a narrow charge-state distribution as well as a narrow IED. These data may enable tailoring thin-film properties through selecting growth conditions that are characterized by predefined charge state and energy distributions.

This report describes FY 2005 technical studies conducted by the Chemical Biology and Nuclear Science Division (CBND) at Lawrence Livermore National Laboratory (LLNL) in support of the Hydrologic Resources Management Program (HRMP) and the Underground Test Area Project (UGTA). These programs are administered by the U.S. Department of Energy, National Nuclear Security Administration, Nevada Site Office (NNSA/NSO) through the Defense Programs and Environmental Restoration Divisions, respectively. HRMP-sponsored work is directed toward the responsible management of the natural resources at the Nevada Test Site (NTS), enabling its continued use as a staging area for strategic operations in support of national security. UGTA-funded work emphasizes the development of an integrated set of groundwater flow and contaminant transport models to predict the extent of radionuclide migration from underground nuclear testing areas at the NTS. The report is organized on a topical basis and contains five chapters that highlight technical work products produced by CBND. However, it is important to recognize that most of this work involves collaborative partnerships with the other HRMP and UGTA contract organizations. These groups include the Energy and Environment Directorate at LLNL (LLNL-E&E), Los Alamos National Laboratory (LANL), the Desert Research Institute (DRI), the U.S. Geological Survey (USGS), Stoller-Navarro …

The strength and deformation behavior of ball-milled, iron-base materials containing nano-scale subgrains have been evaluated. As reported by several authors, nanosubgrains form during the early stages of ball milling as a result of severe plastic deformation inherent in the ball milling process. The strength for these nano-scale subgrains are compared with the strength of larger-scale subgrains in iron and iron-base alloys produced by traditional mechanical working. The data covers over 2 orders of magnitude in subgrain size (from 30 nm to 6 {micro}m) and shows a continuous pattern of behavior. For all materials studied, the strength varied as {lambda}{sup -1}, where {lambda} is the subgrain size. Strengthening from subgrains was found to breakdown at a much smaller subgrain size than strengthening from grains. In addition, the ball-milled materials showed significant strengthening contributions from nano-scale oxide particles. Shear bands are developed during testing of ball-milled materials containing ultra-fine subgrains. A model for shear band development in nano-scale subgrains during deformation has also been developed. The model predicts a strain state of uniaxial compression in the shear band with a strain of -1.24. Subgrains are shown to offer the opportunity for high strength and good work hardening with the absence of yield …

Curved lipid membranes are ubiquitous in living systems and play an important role in many biological processes. To understand how curvature and lipid composition affect membrane formation and fluidity we have assembled and studied mixed 1,2-Dioleoyl-sn-Glycero-3-Phosphocholine (DOPC) and 1,2-Dioleoyl-sn-Glycero-3-Phosphoethanolamine (DOPE) supported lipid bilayers on amorphous silicon nanowires with controlled diameters ranging from 20 nm to 200 nm. Addition of cone-shaped DOPE molecules to cylindrical DOPC molecules promotes vesicle fusion and bilayer formation on smaller diameter nanowires. Our experiments demonstrate that nanowire-supported bilayers are mobile, exhibit fast recovery after photobleaching, and have low concentration of defects. Lipid diffusion coefficients in these high-curvature tubular membranes are comparable to the values reported for flat supported bilayers and increase with decreasing nanowire diameter.

None

Steady-state dissolution rates of diopside are measured as a function of solution saturation state using a titanium flow-through reactor at pH 7.5 and temperature ranging from 125 to 175 C. Diopside dissolved stoichiometrically under all experimental conditions and rates were not dependent on sample history. At each temperature, rates continuously decreased by two orders of magnitude as equilibrium was approached and did not exhibit a dissolution plateau of constant rates at high degrees of undersaturation. The variation of diopside dissolution rates with solution saturation can be described equally well with a ion exchange model based on transition state theory or pit nucleation model based on crystal growth/dissolution theory from 125 to 175 C. At 175 C, both models over predict dissolution rates by two orders of magnitude indicating that a secondary phase precipitated in the experiments. The ion exchange model assumes the formation of a Si-rich, Mg-deficient precursor complex. Lack of dependence of rates on steady-state aqueous calcium concentration supports the formation of such a complex, which is formed by exchange of protons for magnesium ions at the surface.

None

Our experimental approach focuses on the use of enzymes which catalyze the addition of oxygen to organic compounds. In tailoring the application of these enzymes to coal processing, we are particularly interested in ensuring that oxidation occurs at sulfur and not at carbon-carbon bonds. Previous studies with DBT have shown that the reaction most frequently observed in microbial oxidative pathways is one in which DBT is oxidized at ring carbons. These reactions, as we have said, are accompanied by a considerable decrease in the energy content of the compound. In addition, microbial pathways have been identified in which the sulfur atom is sequentially oxidized to sulfoxide, to sulfone, to sulfonate, and finally to sulfuric acid. In this case, the fuel value of the desulfurized compounds is largely retained. We are evaluating the potential of commercially available enzymes to perform this function.

We evaluated mechanical, thermal, thermodynamic, and chemical properties of Dow Corning DC-S-2000, a silicone rubber filled with silica, that was selected as an O-ring material for SHIVA laser amplifiers. We compared the properties of a batch cured in-house with the manufacturer's specifications, and we developed specific quality-control tests to evaluate future production batches of this elastomer. We also examined mechanical and thermal transitions not described in the manufacturer's bulletin. Because the silicone O-rings must function under prolonged compression, we recommend an examination of the compression properties of DC-S-2000.

The Pen Branch fault was identified in the subsurface at the Savannah River Site (SRS) in 1989 based upon interpretation of earlier seismic reflection surveys and other geologic investigations (Seismorgraph Services Incorp., 1973; Chapman and DiStefano, 1989; Snipes, Fallaw and Price, 1989). A program was initiated at that time to determine the capability of the fault to release seismic energy (Price and others, 1989) as defined in the Nuclear Regulatory Commission regulatory guidelines, 10 CFR 100 Appendix A. This report presents the results of the Pen Branch fault investigation based on data acquired from seismic reflection surveys and shallow drilling across the fault completed at this time. The Earth Science Advisory Committee (ESAC) has reviewed the results of these investigations and unanimously agrees with the conclusion of Westinghouse Savannah River Company (WSRC) that the Pen Branch fault is a non-capable fault. ESAC is a committee of 12 earth science professionals from academia and industry with the charter of providing outside peer review of SRS geotechnical, seismic, and ground water modeling programs.

The objective of this research is to demonstrate on a laboratory scale the technical feasibility of the direct microbial conversion of pretreated wood to ethanol. During the first year of this contract, we investigated the feasibility of biologically delignifying wood with C. pruinosum and directly fermenting the pretreated wood to ethanol with a mixed culture. Bench-top fermentations of a thermophilic bacillus growing on glucose and of a mixed culture of thermophilic sporocytophaga (US) and a thermophilic bacillus growing on microcrystalline and amorphous cellulose were evaluated for growth and ethanol production. In the mixed culture fermentation of amorphous and microcrystalline cellulose, the specific rate of substrate depletion was calculated to be 0.087 hr/sup -1/ and 0.0346 hr/sup -1/, respectively. However, defining the growth requirements of C. pruinosum and sporocytophaga (US) proved more difficult than originally anticipated. In order to achieve the program objectives within the contract period, a revised research plan was developed based upon chemical pretreatment and the direct fermentation of pretreated hardwood to ethanol. In place of the biological delignification pretreatment step, we have substituted a chemically supplemented steam pretreatment step to partially delignify wood and to enhance its accessibility to microbial utilization. Clostridium thermocellum, which ferments cellulose directly …

Research at Virginia Tech led to two complementary concepts for improving the removal of inorganic sulfur from much of the Eastern US coals. One controls the surface properties of coal pyrite (FeS[sub 2]) by electrochemical-.potential control, referred to as the Electrochemically Enhanced Sulfur Rejection (EESR) Process: The second controls the flotation of middlings, i.e., particles composed of pyrite with coal inclusions by using polymeric reagents to react with pyrite and convert the middlings to hydrophilic particles, and is termed the Polymer Enhanced Sulfur Rejection (PESR) Process. These new concepts are based on recent research establishing the two main reasons why flotation fails to remove more than about 50% of the pyritic sulfur from coal: superficial oxidization of liberated pyrite to form polysulfide oxidation products so that a part of the liberated pyrite floats with the coal; and hydrophobic coal inclusions in the middlings dominating their flotation so that the middlings also float with the coal. These new pyritic-sulfur rejection processes do not require significant modifications of existing coal preparation facilities, enhancing their adoptability by the coal industry. It is believed that they can be used simultaneously to achieve both free pyrite and locked pyrite rejection.

A 1976 treaty between the United States and the Soviet Union permits a local seismic network to be deployed at the site of a peaceful nuclear explosion to monitor the event. Criteria for the design and selection of the data-acquisition equipment for such a network are provided. Constraints imposed by the protocol of the treaty, the environment, and the expected properties of seismic signals (based on experiences at the Nevada Test Site) are discussed. Conclusions are drawn about the desired operating mode. Criteria for a general seismic instrumentation system are described.

Accurate calculation of hyperfine structure of (d+s)[sup n] states involves dealing with both relativistic and correlation effects in a multi-reference framework (all (d+s)[sup n] states of fixed n,J treated at once). The algorithms were improved (BCB and REDUCE methods) and applied to the hfs of Zr II for (d+s)[sup 3] states. The fs intervals were determined to within 0.075 eV, and the hfs was only 17% in error; this represents the first time that all of the (d+s)[sup n] fs levels have been accurately determined by ab initio theory. Calculations for Nb III, La I, and Hf II [J=1.5] will be published when the J=0.5 calculations are complete. 9 refs, 1 tab.