We present a simple analytical solution for one dimensional steady heat transfer with convection and conduction through a multi-layer system such as a vadose zone. We assume that each layer is homogeneous and has a constant thermal diffusivity. The mass/heat flow direction is perpendicular to the layers, and the mass flow rate is a constant. The analytical solution presented in this study also assumes constant known temperatures at the two boundaries of the system. Although the analytical solution gives the temperature as a function of a few parameters, we focus on the inverse application to estimate the percolation rate to high degree of accuracy (e.g., to mm/y). In some other cases the solution may also be helpful in characterizing potential lateral flow along layer divides.

The application of forensic science techniques to electrical equipment failure investigation has not been widely documented in the engineering world. This paper is intended to share an example of using material characterization techniques to support an initial cause determination of an electrical component failure event. The resulting conclusion supported the initial cause determination and ruled out the possibility of design deficiencies. Thus, the qualification testing of the equipment was allowed to continue to successful completion.

This study assessed chemical treatment options for decomposing the tetraphenylborate in High Level Waste (HLW) Tank 48H. Tank 48H, located at the Savannah River Site in Aiken, SC, contains approximately one million liters of HLW. The tetraphenylborate slurry represents legacy material from commissioning of an In Tank Precipitation process to separate radioactive cesium and actinides from the nonradioactive chemicals. During early operations, the process encountered an unplanned chemical reaction that catalytically decomposed the excess tetraphenylborate producing benzene. Subsequent research indicated that personnel could not control the operations within the existing equipment to both meet the desired treatment rate for the waste and maintain the benzene concentration within allowable concentrations. Since then, the Department of Energy selected an alternate treatment process for handling high-level waste at the site. However, the site must destroy the tetraphenylborate before returning the tank to HLW service. The research focuses on identifying treatments to decompose tetraphenylborate to the maximum extent feasible, with a preference for decomposition methods that produce carbon dioxide rather than benzene. A number of experiments examined whether the use of oxidants, catalysts or acids proved effective in decomposing the tetraphenylborate. Additional experiments developed an understanding of the solid, liquid and gas decomposition products.

With a sample of approximately 89 million B{bar B} pairs collected with the BABAR detector, they measure branching fractions, determine the degree of longitudinal polarization, and search for direct CP violation in the decays B{sup 0} {yields} {phi}K*{sup 0} and B{sup +} {yields} {phi}K*{sup +}. They perform a search for other charmless vector-vector B decays involving {rho} and K*(892) resonances and observe the decays B{sup +} {yields} {rho}{sup 0} K*{sup +} and B{sup +} {yields} {rho}{sup 0}{rho}{sup +}. The branching fractions are measured to be {Beta}({phi}K*{sup 0}) = (11.1{sub -1.2}{sup +1.3} {+-} 1.1) x 10{sup -6}, {Beta}({phi}K*{sup +}) = (12.1{sub -1.9}{sup +2.1} {+-} 1.5) x 10{sup -6}, {Beta}({rho}{sup 0} K*{sup +}) = (7.7{sub -2.0}{sup +2.1} {+-} 1.4) x 10{sup -6}, and {Beta}({rho}{sup 0}{rho}{sup +}) = (9.9{sub -2.5}{sup +2.6} {+-} 2.5) x 10{sup -6}. The longitudinal polarization fractions are measured to be {Lambda}{sub L}/{Lambda}({phi}K*{sup 0}) = 0.65 {+-} 0.07 {+-} 0.04 and {Lambda}{sub L}/{Lambda}({phi}K*{sup +}) = 0.46 {+-} 0.12 {+-} 0.05. They measure the charge asymmetries: {Alpha}{sub CP}({phi}K*{sup 0}) = +0.04 {+-} 0.12 {+-} 0.02 and {Alpha}{sub CP}({phi}K*{sup +}) = +0.16 {+-} 0.17 {+-} 0.04.

High redshift radio galaxies (HzRGs) are key targets for studies of the formation and evolution of massive galaxies.The role of dust in these processes is uncertain. We have therefore observed the dust continuum emission from a sample of z > 3 radio galaxies with the SCUBA bolometer array. We confirm and strengthen the result found by Archibald et al. (1), that HzRGs are massive starforming systems and that submillimeter detection rate appears to be primarily a strong function of redshift. We also observed HzRG-candidates that have so far eluded spectroscopic redshift determination. Four of these have been detected, and provide evidence that they may be extremely obscured radio galaxies, possibly in an early stage of their evolution.

We present a systematic investigation on the formation of the highly mismatched alloy GaN{sub x}As{sub 1-x} using N{sup +}-implantation followed by a combination of pulsed laser melting and rapid thermal annealing. Thin films of GaN{sub x}As{sub 1-x} with x as high as 0.016 and an activation efficiency of the implanted N up to 50% have been synthesized with structural and optical properties comparable to films grown by epitaxial deposition techniques with similar substitutional N content. The effects of N{sup +} implantation dose, laser energy fluence and rapid thermal annealing temperature on the N incorporation as well as optical and structural properties of the GaN{sub x}As{sub 1-x} films are discussed.

Coupled modeling of subsurface multiphase fluid and heat flow, solute transport and chemical reactions can be used for the assessment of acid mine drainage remediation, waste disposal sites, hydrothermal convection, contaminant transport, and groundwater quality. We have developed a comprehensive numerical simulator, TOUGHREACT, which considers non-isothermal multi-component chemical transport in both liquid and gas phases. A wide range of subsurface thermo-physical-chemical processes is considered under various thermohydrological and geochemical conditions of pressure, temperature, water saturation, and ionic strength. The code can be applied to one-, two- or three-dimensional porous and fractured media with physical and chemical heterogeneity.

As Grid permeates modern computing, Grid solutions continue to emerge and take shape. The actual Grid development projects continue to provide higher-level services that evolve in functionality and operate with application-level concepts which are often specific to the virtual organizations that use them. Physically, however, grids are comprised of sites whose resources are diverse and seldom project readily onto a grid's set of concepts. In practice, this also creates problems for site administrators who actually instantiate grid services. In this paper, we present a flexible, uniform framework to configure a grid site and its facilities, and otherwise describe the resources and services it offers. We start from a site configuration and instantiate services for resource advertisement, monitoring and data handling; we also apply our framework to hosting environment creation. We use our ideas in the Information Management part of the SAM-Grid project, a grid system which will deliver petabyte-scale data to the hundreds of users. Our users are High Energy Physics experimenters who are scattered worldwide across dozens of institutions and always use facilities that are shared with other experiments as well as other grids. Our implementation represents information in the XML format and includes tools written in XQuery and …