Report presenting a theory of reduction of convective heat transfer to a surface in supersonic flow by periodically imposing a large-scale vortical motion on the boundary layer and an experimental investigation of that theory. Results regarding the pulsating flow phenomena, heat-transfer characteristics, and aerodynamic characteristics are provided.

Report presenting flight testing of two 7.5 degree boattail bodies of revolution with constant base annuli and varying jet static-pressure ratios and simulated turbojet exhaust rocket motors in order to determine the jet interference effects on total-drag and base-pressure coefficients over a range of Mach numbers. Results regarding the total drag and base-pressure and base-drag coefficients are provided.

This report presents the results of tests of 209 simple wing-fuselage combinations made in the NACA variable-density wind tunnel to provide information regarding the effects of aerodynamic interference between wings and fuselages at a large value of Reynolds number.

Report presenting a theoretical study of the dynamic lateral stability characteristics of an airplane with a 60 degree triangular wing. Calculations included the determination of the neutral-lateral-oscillatory-stability boundary, the period and time to damp to one-half amplitude of the lateral oscillation, and the time to damp to one-half amplitude for the spiral mode. The airplane was generally found to be stable for all conditions.

"An investigation has been made to explore the possibilities of axial-flow compressors operating with supersonic velocities into the blade rows. Preliminary calculations showed that very high pressure ratios across a stage, together with somewhat increased mass flows, were apparently possible with compressors which decelerated air through the speed of sound in their blading. The first phase of the investigation was the development of efficient supersonic diffusers to decelerate air through the speed of sound" (p. 473).

Some of the significant interference fields that may affect stability of aircraft at supersonic speeds are briefly summarized. Illustrations and calculations are presented to indicate the importance of interference fields created by wings, bodies, wing-body combinations, jets, and nacelles.

A chart is presented for the values of the coefficient in the formula for the critical compressive stress at which buckling may be expected to occur in flat rectangular plates supported along all edges and, in addition, elastically restrained against rotation along the unloaded edges. The mathematical derivations of the formulas required in the construction of the chart are given.

From Introduction: "The resulting losses in performance have been studied in a number of analyses such as that reported in reference 1."

Report presenting an analysis of the maximum power thrust-minus-drag performance of several turbojet-engine air-inlet combinations over a wide range of flight conditions. The primary objective of the analysis was to use the experimentally determined drag and total-pressure-recovery characteristics to show the range of satisfactory performance of each of several fixed-geometry inlet configurations. Results regarding the performance at 35,000 feet, inlet design considerations, speed range of efficient normal-shock inlet performance, effect of altitude on performance of the fixed-geometry system, and effect of nonstandard air on the performance of a fixed-geometry system are provided.

From Introduction: "This paper presents the results of an investigation of force and moment characteristics for a wing with an unswept quarter-chord line, aspect ratio 2, taper ratio 0.78, and an NACA 65A004 airfoil section parallel to the free stream."

This report describes a method of determining the turbulence in wind tunnels. The effect of turbulence upon the diffusion of heat from a small electrically heated wire in an air stream was investigated. The turbulence of the stream was introduced by a series of geometrically similar screens placed one at a time across the upstream section of the tunnel. With the wire set at various distances from the screens, curves of temperature distribution were obtained by traversing the heated wake at a distance of 2 inches behind the wire with a small thermocouple.

Report presenting a supersonic wind-tunnel investigation of the origin and distribution of store interference in the 4- by 4-foot supersonic pressure tunnel at Mach number 1.61. The separate forces on a store, a fuselage, a swept wing, and a swept-wing-fuselage combination were measured. Results regarding drag, lift, pitching moment, side force, and yawing moment are provided.

Memorandum presenting a supersonic wind-tunnel investigation of the origin and distribution of store interference performed in the 4- by 4-foot supersonic pressure tunnel at Mach number 1.61 in which separate forces on a store, a fuselage, a swept wing, and a swept-wing-fuselage combination were measured. The report presents data on a configuration which simulated a heavy-bomber airplane with stores of several shapes and sizes.

Memorandum presenting a group of alkylsilanes consisting of monoethylsilane, diethylsilane, and trimethylsilane prepared in 65- and 90-percent yield by reduction of the respective alkylchlorosilanes with either lithium hydride or lithium aluminum hydride. The boiling points, densities, refractive indices, and freezing points were determined and presented with a survey of literature values.

From Summary: "An analysis is presented of the effect of torsional flexibility on the rolling characteristics at supersonic speeds of tapered unswept wings with partial-span constant-percent-chord ailerons extending inboard from the wing tip. The geometric variables considered are aspect ratio, taper ratio, aileron span, and aileron chord. The shape of the wing-torsional-stiffness curve is assumed and the twisting moment is considered to result solely from the pressure distribution caused by aileron deflection, so that the necessity of using a successive-approximation method is avoided."