This report describes seven geothermal gradient test holes in the southern Washington Cascade Mountains. The objectives of the drilling program were to: (1) more accurately define the general extent of potential geothermal resources in the southern Washington Cascades, and (2) evaluate specific targets that are geologically and structurally favorable for the occurrence of geothermal resources. (ACR)

Brief summaries are given of 44 different experiments either running or scheduled to run at the Brookhaven National Laboratory Alternating Gradient Synchrotron, as well as the experiment schedules. The beam parameters and fluxes are tabulated. Illustrations are given of both the experimental area layouts and the apparatus for each experiment. (LEW)

This paper describes an alternative library of elementary functions prepared for use with the standard Fortran compiler under 4.2 BSD UNIX on a VAX 11/780. The library, written in C and based on the book ''Software Manual for the Elementary Functions'' by Cody and Waite, offers improved accuracy over the standard system library, as well as additional capabilities. Listings and output from the ELEFUNT suite of test programs are included in the appendix.

An assessment by the Office of Technology Assessment (OTA) that "analyzes the scientific, regulatory, economic, legal, and ethical considerations involved in alternative technologies in biomedical and behavioral research, toxicity testing, and education" (p. iii).

The Amplifier-Discriminator-Multiplexor (ADM) card described was designed for the External Muon Identifier at the 15 ft Bubble Chamber. The general scheme of the data readout of the External Muon Identifier is based on the use of a master clock. The ADM card serves to amplify the signals from the proportional tubes, discriminate them, latch the signals in parallel into a shift register. The data are then shifted out serially to the Time Digitizing System, using the master clock. The shift registers are loaded, and the latches are reset every sixteen cycles of the master clock. (LEW)

Heat transfer in evacuated-tube solar collectors with heat-pipe absorbers is compared with that for similar collectors with flow-through absorbers. In systems that produce hot water or other heated fluids, the heat-pipe absorber suffers a heat transfer penalty compared with the flow-through absorber, but in many cases the penalty can be minimized by proper design at the heat-pipe condenser and system manifold. The heat transfer penalty decreases with decreasing collector heat loss coefficient, suggesting that evacuated tubes with optical concentration are more appropriate for use with heat pipes than evacuated or non-evacuated flat-plate collectors. When the solar collector is used to drive an absorption chiller, the heat-pipe absorber has better heat transfer characteristics than the flow-through absorbers.

There are two fundamental reasons to have a full knowledge of the angular distribution of power from an insertion device: 1. To evaluate the heat-load distribution on the first optical element in a beamline. 2. To estimate the total radiated power which will impinge on the walls of an insertion device. This is important to ensure needed cooling of the insertion device walls. The photodesorption is another closely related phenomenon determined by the exposure of the insertion device walls to the radiated power and of consequence to the successful operation of the storage ring. In this paper, we will primarily focus on undulators, but also consider situations as the value of K increases to the wiggler regime. These calculations are very involved and cumbersome and we shall only present some specific results related to the 6-GeV insertion devices.

None

This report contains descriptions of projects specifically related to anadromous salmonids. They include projects in the following categories: (1) fish and wildlife projects in western Montana; (2) fish health and physiology; (3) habitat enhancement and passage improvement - Oregon I; (4) passage improvement and natural propagation - Washington; (5) habitat enhancement and passage improvements - Oregon II; (6) future hydroelectric assessments; (7) habitat enhancement and passage improvement - Idaho; (8) downstream migration: flows and monitoring; (9) downstream migration: reservoir impacts; and (10) habitat evaluation and monitoring. (ACR)

A model is proposed to explain the behavior of the gross energy confinement time in ohmically heated tokamak plasmas. The analysis takes into account the effect of the anomalous thermal conductivity due to small scale turbulence and of the macroscopic MHD behavior, which provides some constraints on the temperature profile. Results indicate that the thermal conductivity associated with the dissipative trapped-electron mode and with the ion temperature gradient (eta/sub i/) mode can account, respectively, for the Neo-Alcator scaling and the saturation of the energy confinement time with density. Comparisons with experimental results show reasonable agreement. 32 refs., 12 figs.

A review of the bridging methods is accomplished by providing an application of the process to the standard HTGR. A representative PRA, of limited range, is used in the process, and representative deterministic licensing bases are obtained. The PRA is presented as a risk plot, and the characteristics of the events and the equipment in the PRA are used in the bridging application. Representative licensing basis events are identified consisting of anticipated operational occurrences, design basis events, and emergency planning basis events. Representative safety-related functions and safety-related structures, systems and components are identified. The licensing basis events and safety-related functions and equipment are representative of the deterministic licensing bases that will be included in the PSID and SARs. A response is requested from NRC on the acceptability of the application of the method, considering the range of the representative PRA presented.

The applications guide introduces readers to the pedestrian special nuclear material (SNM) monitors that provide nuclear material control at DOE contractor facilities. It explains the principles of operation, the strong and weak points, and steps for calibration and maintenance of the monitors. Administrators and security specialists will find an overview of pedestrain monitor application and upkeep in Part 1 of the guide and a descriptive catalog of present-day monitors in Part 3. Technically oriented readers will be interested in the more detailed discussion of SNM monitoring physics and SNM monitor design principles found in Part 2. 18 refs., 33 figs., 9 tabs.

This report was prepared for the Office of Conservation, Bonneville Power Administration. The report will be used by the Office as background information to support future analysis and implementation of electricity conservation programs for owners of residential rental housing in the Northwest. The principal objective of the study was to review market research information relating to attitudes and actions of Northwest rental housing owners and, to a lesser extent, tenants toward energy conservation and energy-efficiency improvements. Available market research data on these subjects were found to be quite limited. The most useful data were two surveys of Seattle rental housing owners conducted in late 1984 for Seattle City Light. Several other surveys provided supplemental market research information in selected areas. In addition to market research information, the report also includes background information on rental housing characteristics in the Northwest.

This report reviews aspects of contemporary neuroscience, emphasizing new information derived from basic and clinical disciplines. It defines the syndrome of dementia and discusses the magnitude of this problems and other issues regarding the disease.

The feasibility of a biological facility to treat geothermal sludge from a base case 50-MW double-flash geothermal power plant in the Imperial Valley, California was evaluated. The effect of sludge and nutrient concentration, agitation air bubbling and sterility on the rate of metal solubilization by the bacteria Thiobacillus thiooxidans and ferrooxidans was examined. All experiments were performed in batch flasks and monitored daily for bacterial growth. T. Thiooxidans leached 36% of the zinc in the sludge after 288 hr but leached little chromium. T. ferrooxidans removed 60% of the chromium in the sludge after 250 hr but did not leach zinc. Sludge to medium ratios of greater than 10% were toxic to the microorganisms studied. the experimental results were used to design a biological solid-waste treatment plant. The design basis used was 5 wt % sludge in the leaching vessel with a residence time of 10 days. The non-regulated waste resulting from the treatment plant could be used for land fill or construction materials. The total capital cost for the bio-leaching plant is $3.3 million with an annual operating cost of $690,000. The total cost of this plant is about 0.2 cents/kWh of electricity produced, which is essentially the same …

The most important outcome of this bowing analysis is the determination of the number of internal breeder rod supports required for good thermal performance. Although many effects were considered, the swelling deformations were the most restrictive in terms of the peak deflections. It appears that three internal supports should be sufficient to keep the rod bowing below acceptable levels without significantly raising the structure-to-breeder ratio. The most severe interaction problem involved the last multiplier row and the first breeder row. Because the Be rods deflect very little, this problem can be alleviated by leaving enough space between these two zones. The spacing can be tighter elsewhere. A more detailed analysis of the multiplier rod bowing caused by the damage gradient must be analyzed before this can be verified.

This report documents a heat transfer and shielding performance test conducted on a Ridihalgh, Eggers and Associates REA 2023 boiling water reactor (BWR) spent fuel storage cask. The testing effort consisted of three parts: pretest preparations, performance testing, and post-test activities. Pretest preparations included conducting cask handling dry runs and characterizing BWR spent fuel assemblies from Nebraska Public Power District's Cooper Nuclear Station. The performance test matrix included 14 runs consisting of two loadings, two cask orientations, and three backfill environments. Post-test activities included calorimetry and axial radiation scans of selected fuel assemblies, in-basin sipping of each assembly, crud collection, video and photographic scans, and decontamination of the cask interior and exterior.

This final report details progress during the third year of this subcontract. The overall objective of this subcontract was two fold: to provide the analytical capability required for selecting microalgae strains with high energy contents and to develop fundamental knowledge required for optimizing the energy yield from microalgae cultures. The progress made towards these objectives during this year is detailed in this report.

None

The general procedure for the kinetic analysis of low-frequency electrostatic and electromagnetic modes in toroidal geometry is now well known. In the collisionless limit, the relevant dynamics (e.g., trapped particles, resonances, etc.) can be treated appropriately. However, with the introduction of collisional effects, it is customary, for tractability, to employ model collision operators which do not rigorously satisfy all conservation properties of more exact collision operators. Insight into the essential required features of such operators can be gained by studying models with increasing levels of completeness for a simpler, unsheared slab geometry. The results presented here for this simpler geometry can provide guidance in choosing model collision operators for toroidal-geometry kinetic calculations. 6 refs., 3 figs.

Stability results obtained with the fully three-dimensional magnetohydrodynamic code BETA, the helically invariant code HERA, and the asymptotic stellarator expansion code STEP agree well for a straight l = 2, M = 5 stellarator model. This good agreement between the BETA and STEP codes persists as toroidal curvature is introduced. This validation provides justification for confidence in work with these models. 20 refs., 11 figs.

Given what is claimed to a reasonably accurate technique for calculating the pbar yield, it is useful to ask for comparisons with the data available from the recent commissioning run. The simplest comparison to make is that of the yield. The number of pbars circulating in the Debuncher was measured many times; the total number of secondaries at IC728 in AP-2 was also measured many times. The ratio of pbars to total flux at IC728 was measured once (Bk. I, p 166); this number was {bar P}/total = 0.032. Typically, the ratio of secondaries at IC728 to protons on target was about 0.0012 (this was about the same number, independent of whether the lens was operated at 600 or 1000 T/m.). Thus, at IC728 we have N{sub P}/N{sub {bar P}} {approx} 1.2 x 10{sup -3} x 3.2 x 10{sup -2} = 3.8 x 10{sup -5} = 38 ppm.

Subsidence and settlement are phenomena that are much more destructive than generally thought. In shallow land burials they may lead to cracking of the overburden and eventual exposure and escape of waste material. The primary causes are consolidation and cave-ins. Laboratory studies performed at Los Alamos permit us to predict settlement caused by consolidation or natural compaction of the crushed tuff overburden. We have also investigated the shear failure characteristics of crushed tuff that may lead to subsidence. Examples of expected settlement and subsidence are calculated based on the known geotechnical characteristics of crushed tuff. The same thing is done for bentonite/tuff mixes because some field experiments were performed using this additive (bentonite) to reduce the hydraulic conductivity of the crushed tuff. Remedial actions, i.e., means to limit the amount of settlement, are discussed. We finally discuss our field experiment, which studies the influence of subsidence on layered systems in general and on biobarriers in particular. The share of the produced cavities is compared with cavities produced by idealized voids in an idealized environment. Study of root penetration at subsidence sites gives us an indication of the remaining degree of integrity. 30 refs., 24 figs., 19 tabs.

A detailed cost study of the ESPRESSO blanket concept for the Tandem Mirror Fusion Reactor (TMR) has been performed to complement the thermal-hydraulic parametric study and to help narrow down the choice of parameters for the final design. The ESPRESSO blanket consists of a number of structurally independent ring modules. Each ring module is made up of a number of mutually pressure-supporting canisters containing arrays of breeder tubes. Two separate helium coolant flows are used: a main flow to cool the tube bank and a cooler first wall flow.