In H measurements, the measured flux-linkage change represents twice the value of H to be plotted. In B measurements the bucking coil links flux equal to the air-flux in the B-measuring coils. The measured flux change therefore corresponds to twice the flux of intrinsic magnetization in the sample.

Our knowledge of the properties of mesons and their interactions with nuclei has come from two sources. Studies of cosmic ray phenomena provided the earliest information. The discovery that mesons may be produced artificially by bombardment of nuclei with radiations from high energy accelerators has, on the other hand, made it feasible to undertake a wide variety of investigations under more controlled conditions than is possible in cosmic ray experiments. In such experiments mesons have been produced by high-energy protons, alpha-particles and neutrons.

The study of artificial radioactive isotopes is at the present time one of the most important topics in nuclear research. It involves the establishment of a detailed term scheme for the disintegration in question. Not only are the energies of the components of the different beta and gamma radiations of interest, but also their intensities. These data give information concerning the probabilities of transitions between the different nuclear energy levels. From them it is possible to draw conclusions regarding the mechanism of the disintegration and to correlate the spina and parities of the levels.

The recent interest in tributyl phosphate as an extracting solvent for uranium indicated that consideration of n-butyl phosphoric acid for this application might be of interest if some way could be devised to overcome the manipulation and miscibility difficulties. It was found that if the material was placed in any one of a number of carrier solvents, it had a remarkably strong extractive effect on uranyl ion out of acid solutions without a salting agent present.

Comparative studies of a series of halogenated solvents, as carriers for TTA in the chelate process for plutonium extraction, indicate that ortho-dichlorobenzene most nearly satisfies the requirements that are set forth. A complete process design is presented for use with this solvent, and flow data and equipment capacities are given for dissolver solution and for uranium-free fission product solution as alternate feeds to the process.

Quarterly progress report on various research projects conducted at the University of California Radiation Laboratory

Ilford type C-2 nuclear research emulsions were exposed in the x-ray beam from the Berkeley synchrotron at four synchrotron energies. The relative yields of the photo-produced nuclear stars were determined as a function of synchrotron energy and prong number.

The effect of air, nitrogen, helium, argon, and a mixture of twenty volume percent of hydrogen in argon on the wetting of a stainless steel (Type 446), a two percent chromium-one half percent molybdenum type steel, and a plain carbon type steel by liquid bismuth was investigated

The report summarizes results obtained since September, 1951, by total neutron yield experiments using 190 Mev deuterons and the MnSo4 tank method (UCRL-1375 and UCRL-1480). A new method of beam monitoring has resulted in establishing firmly the absolute yield for solid uranium and thorium primary targets backed by a solid uranium secondary. The beam monitoring was done by using a primary target built into a faraday cup. This method circumvents errors caused by recombination in the ionization chambers used previously.

Quarterly summary report of studies conducted through the Radiation Laboratory, University of California. Some results reported in the report may be of a preliminary or incomplete nature.

Bismuth metal was irradiated with 340 Mev protons in the circulating beam of the 184-inch Berkeley cyclotron. Nuclides formed as fission products during the course of the bombardment were separated and studied through the use of radiochemical techniques.

The total number of neutrons emitted from various targets bombarded by high energy deuterons and protons was measured by using a solution of MnSO<sub>4 to thermalize and capture the neutrons. The methods of monitoring the number of particles striking the target and of calibrating the neutron detecxting apparatus are discussed in detail. Deuterons of energies to 230 Mev and protons of energies to 345 Mev were used. Targets ranging from lithium to uranium were used and were backed by secondary targets of uranium and thorium. The yields are expressed in terms of the number of neutrons emitted per incident particle. Uranium targets gave the highest yield.

Research progress on projects: Landau Effect with 32 Mev Protons, n - p Scattering of "300" Mev Neutrons, Geologic History of the Earth's Magnetic Field.

Introduction: "In connection with conducting neutron experiments in a pit with earth and concrete walls, it was proposed that the background flux of neutrons might be reduced by lining the walls of the pit with a neutron absorber such as boron. To determine how much liner material would be desirable and what diminution in the neutron background could be expected, the following measurements were undertaken."

The angular distribution of charged pions from 100 = 30 Mev neutron bombardment of C12 and Be9 has been measured. These data may be used to infer, by subtraction, the identity, within limits, of the [formula] and [formula] angular distributions.

A graph plotting pulse height analyzer of compact size and moderate cost is described. The operation is simple and flexible, and the instrument is easy to maintain.

The following report describes test experiments with an inexpensive practical phaseplate and to present in greater detail the theory of its operation in a schlieren optical system.

Abstract. An analysis is made of a proposal to obtain neutrons of 15-25 Kev energy by moderating fast neutrons in aluminum and then reflecting off titanium. The fluxes calculated do not significantly exceed those obtainable from a standard antimony-beryllium photoneutron source. Two appendices treat aspects of the transport of neutrons through a slab of finite thickness.

Abstract. While the concept of a biological system as a balanced network of chemical transformations is not a new one, experimental definition of specific systems has been lacking. This paper defines theoretically and experimentally a number of such networks and their behavior and response to some limited environmental changes.

The following report describes the process of epoxy resin casting of high-voltage transformers, bushings, and potheads.

Abstract: "The analysis of an immobilized plasma is here extended to the case where the geometry is cylindrical rather than Cartesian. (This report, UCRL-4439 (Rev, 4 constitutes Part II of the report series (UCRL-4466, Parts I, III, and IV) dealing with this general problem.)"

Report discussing the torus model of elementary particles such as the electron and proton. Figures illustrating a simple torus model as well as a more complex version of the model are presented.

Introduction: A proposal for using an energetic neutral deuteron beam for injection into a mirror machine has been made by Eugene Lauer. This report describes an experimental attempt to produce a large neutral deuteron beam. The beam from the NTA ion source was passed through a target of hydrogen gas where the charge exchange mechanics produced a beam of energetic neutral deuterium atoms.

This report discusses a nuclear spectroscopic study of the radiations resulting from the electron capture decay of Ta-176, Ta-177, and Ta-178, analyzing data of nuclear decay schemes.