Report detailing an analysis of the deposition of I-131 on vegetation. Analysis was necessary to determine the potential hazards of the gases from the dissolution of the metal on vegetation.

The following report describes the process of the determination of nitrous oxide with the infrared spectrometer.

Abstract: This report gives the results of a radiochemical analysis of particles collected by electrostatic precipitation from ventilation air of the "B" plant at Hanford Works.

The following report covers the construction materials selected for laboratory corrosion studies and the determination of their corrosion rates in process solutions.

The following report describes two rapid, micro methods for the determination of UNH in Redox waste samples that had been developed fir the concentration range 0.2 to 100 g/l.

This report examines a uranium slug that has been produced by powder metallurgical methods and exposed in the 100-DR Pile and was deformed during pile exposure.

Report covering an experiment on a method for determining the crystallographic orientation within uranium rods. From summary: "The crystallographic orientation existing in rolled uranium rods may be determined by comparing the diffraction pattern obtained from an unknown specimen with the diffraction pattern obtained from a sample known to be randomly oriented."

The following report provides the results of an accelerated corrosion test that was performed to compare the effect of two coagulants on the corrosion rates of aluminum slug jacket alloy and 72S. Additionally, some analytical data on the water from the two treatments were obtained and are presented in this report.

Objective: "Production Test 235-1 and an amendment, were written to outline the procedures for reducing the outgassing time and evaluating the effects of these reductions."

From introduction: "The following recommendations represent the best estimate, based on present knowledge, of the requirements for generally applicable or "universal" instrument for the continuous monitoring of radioactive process streams in terms of their gamma activity."

The following report calculates pile reactivity changes that result from different pile loadings where it is desirable to have available values of (flux)2 d(volume) for various flat zone radii. This information was found for a cylindrical pile having circular flat zones and an effective radius of 598 cm., by integrating over a cross sectional volume of one cm. thickness.

Report detailing the refractive index of solutions of uranyl nitrate, nitric acid and aluminum nitrate. This report builds upon preliminary data and a brief discussion that from a previous report. This report covers more accurate and detailed data that had be accumulated following the initial report.

From summary: "The methods of calibrating the 305 pile for impurities and density differences in graphite are reviewed and calibration constants are calculated theoretically."

This report follows work that is meant to determine the settling rate and viscosity of Hanford Waste metal slurry as a function of prolonged agitation and shear, and to repeat these determinations on a synthetic incubated material similar to that used in the acidification studies, HW-18367, and to make a direct comparison between the genuine and simulated wastes.

A report describing a the results of a fluorimetric and volumetric method for the determination of fluoride. This method was developed for the determination of ionizable fluorine in gases in the range of 1-500ppm. This method was chosen because the determination depends on the generation of a color rather than the bleaching effect or on a change of color.

Abstract: "This is the preliminary report of a radiological-ecological survey of the invertebrate fauna that inhabit the Columbia River within the confines of Hanford Works and downstream to the site of McNary Dam. The survey was carried out during the period of October, 1948 through February, 1950. Materials and methods are discussed and the results of extensive radioassays, qualitative and quantitative biological determinations, and hydrographic studies are given and analyzed. Twelve figures and twenty-three tables are included. All aquatic invertebrates were found to be concentrating radioactivity from the river water. A maximum activity density of 4.4-10-(-3) μc/g wet weight was found in the larvae of midges (Hydrobaeninae) collected near Hanford during September, 1949. Radioactive wastes were not found to be causing any apparent deleterious effects to the natural invertebrate fauna. Existing population variations are caused by biological and hydrographic conditions."

This document will be concerned with the design, operation and maintenance of an automatic fuel element stamping machine. In order to take advantage of automatic unloading and length checking at the Acme-Gridley lathes in the 313 Building, automatic stamping of fuel elements is desirable. This, along with the need for a permanent canning line identification, resulted in a request for a machine to automatically stamp HAPO fuel elements on a production basis.

During normal operation the NPR will function as a closed system and the coolant will be maintained at a high degree of purity. Periodically, however, the system will have to be opened for fuel element discharge and/or decontamination. During these periods the reactor will be operated on single pass cooling. The use of deionized and deoxygenated water as the single pass coolant is not economically feasible due to the large quantities of coolant that will be required. At present it appears that filtered water will be used for this purpose. Since filtered water contains substantial amounts of dissolved solids (approximately 100 parts per million), and since it is saturated with air, this type of operation will have to be investigated with regard to corrosion problems. A particularly serious problem will be present after the system has been decontaminated, since the high temperature oxide films will have been removed and the bars metal surfaces will be exposed to the coolant.

Considerable work has been done on decontamination procedures for both corrosion products and fission products. Testing of promising procedures under typical rupture conditions is an important phase of this work. The Irradiated Rupture Prototype (IRP) has been used since August in this evaluation work. This document is one of a series reporting these data.

One of the problems encountered in the design of the EGCR has been the possibility of bowing in the outer six rods of the seven rod cluster. The power distribution in an outer rod is asymmetrical with respect to the center of the rod. This causes a variation in the cladding temperature, and might result in unven thermal expansion, or bowing.

The Biology Operation, Hanford Laboratories, required plutonium dioxide particles in five different micron and sub-micron size ranges. These were to be supplied as a water suspension in small containers. It was necessary to design equipment, suitable for hood operation, which would give a satisfactory separation of these particles.

An ex-reactor test stimulating the charging of a tubular fuel element in a Zircaloy-2 process tube showed a problem of severe process tube scratching and galling may occur if metal sliding contact fuel element supports are used. Both the fuel supports and the process tubes were autoclaved. Although the conditions of this test were severe in that the sharp edges rather than a flat surface of the supports were in contact with the process tube, it pointed out the potential problem of galling by point on small area contact supports on heavy fuel elements. This difficulty had not been observed with the lighter tubular or cluster fuel elements used in KER irradiation. In addition to the loss of metal and thinning of the process tube after a number of charge-discharge operations, these scratches may lead to localized corrosion or act as points of stress concentration.

High speed data handling and computing systems are coming into increasing use in the automatic control of complex industrial processes. One of the next significant developments in reactor design is believed to be the application of high speed data handling and control systems to nuclear reactors. This document is a study of such a system intended for use with the Plutonium Recycle Test Reactor.

This article presents data on the effects of gamma radiation on the physical properties of a number of different classes of plastics materials of construction which were screened to determine their capabilities and limitations for service in applications where ionizing radiation exists. The irradiations were carried out in air at ambient temperature at normal atmospheric pressure to various gamma radiation doses up to 1*10^9 r depending upon the stability of the materials to radiation exposure. The different classes of materials and materials within a class are compared.