The following report describes two rapid, micro methods for the determination of UNH in Redox waste samples that had been developed fir the concentration range 0.2 to 100 g/l.

This document will be concerned with the design, operation and maintenance of an automatic fuel element stamping machine. In order to take advantage of automatic unloading and length checking at the Acme-Gridley lathes in the 313 Building, automatic stamping of fuel elements is desirable. This, along with the need for a permanent canning line identification, resulted in a request for a machine to automatically stamp HAPO fuel elements on a production basis.

The investigation to be described in this paper was one of several undertaken to resolve a curious discrepancy that had arisen in measurements of the diffusion length of graphite. Those diffusion lengths measured with the graphite layups of 100 Area piles were three to six centimeters higher than the value obtained with the Hanford Standard Pile. The fact that the 100 Area structures of the order of 40 ft. X 40 ft. X 30 ft, not including reflector, approximated an infinite medium, whereas sigma piles are of the order of 8 ft. X 8ft. X 10 ft., suggested the possibility that the diffusion length obtained by mensuration of relative fluxes and application of the conventional equations depended in some way on the size of the medium. Therefore, in order to determine if such a dependency actually exists, it was proposed to erect a series of graphite stacks of different dimensions and to make diffusion length measurements in each.

Report detailing the refractive index of solutions of uranyl nitrate, nitric acid and aluminum nitrate. This report builds upon preliminary data and a brief discussion that from a previous report. This report covers more accurate and detailed data that had be accumulated following the initial report.

The Biology Operation, Hanford Laboratories, required plutonium dioxide particles in five different micron and sub-micron size ranges. These were to be supplied as a water suspension in small containers. It was necessary to design equipment, suitable for hood operation, which would give a satisfactory separation of these particles.

Objective: "Production Test 235-1 and an amendment, were written to outline the procedures for reducing the outgassing time and evaluating the effects of these reductions."

High speed data handling and computing systems are coming into increasing use in the automatic control of complex industrial processes. One of the next significant developments in reactor design is believed to be the application of high speed data handling and control systems to nuclear reactors. This document is a study of such a system intended for use with the Plutonium Recycle Test Reactor.

The following report provides the results of an accelerated corrosion test that was performed to compare the effect of two coagulants on the corrosion rates of aluminum slug jacket alloy and 72S. Additionally, some analytical data on the water from the two treatments were obtained and are presented in this report.

Abstract: "This is the preliminary report of a radiological-ecological survey of the invertebrate fauna that inhabit the Columbia River within the confines of Hanford Works and downstream to the site of McNary Dam. The survey was carried out during the period of October, 1948 through February, 1950. Materials and methods are discussed and the results of extensive radioassays, qualitative and quantitative biological determinations, and hydrographic studies are given and analyzed. Twelve figures and twenty-three tables are included. All aquatic invertebrates were found to be concentrating radioactivity from the river water. A maximum activity density of 4.4-10-(-3) μc/g wet weight was found in the larvae of midges (Hydrobaeninae) collected near Hanford during September, 1949. Radioactive wastes were not found to be causing any apparent deleterious effects to the natural invertebrate fauna. Existing population variations are caused by biological and hydrographic conditions."

Abstract: This report gives the results of a radiochemical analysis of particles collected by electrostatic precipitation from ventilation air of the "B" plant at Hanford Works.

During normal operation the NPR will function as a closed system and the coolant will be maintained at a high degree of purity. Periodically, however, the system will have to be opened for fuel element discharge and/or decontamination. During these periods the reactor will be operated on single pass cooling. The use of deionized and deoxygenated water as the single pass coolant is not economically feasible due to the large quantities of coolant that will be required. At present it appears that filtered water will be used for this purpose. Since filtered water contains substantial amounts of dissolved solids (approximately 100 parts per million), and since it is saturated with air, this type of operation will have to be investigated with regard to corrosion problems. A particularly serious problem will be present after the system has been decontaminated, since the high temperature oxide films will have been removed and the bars metal surfaces will be exposed to the coolant.

An inventory of the contaminated materials accumulated since the initiation of this project in June 1958, revealed a larger variety and quantity of materials that could be burned, than was specified for the initial scope. Therefore, it is desirable to revise the scope to permit handling the majority of these materials with the initially installed equipment.

A part of the development activities of the Process Equipment Development Group, Chemical Development, HLO through the year 1959 has consisted of test evaluation of some of the never products of manufacturers, design and refinement of novel units to do certain specialized jobs and development of improved components for existing plant equipment. Modification of present chemical processing methods and investigation of new basic procedures have made it necessary to utilize different and "exotic" materials, titanium, has given rise to another problem-- that of the selection of adequate and compatible bearings where the titanium is used as moving or rotating part.

From summary: "The methods of calibrating the 305 pile for impurities and density differences in graphite are reviewed and calibration constants are calculated theoretically."

Investigation of principles of pulse-column design and effects of operating variables.

Organic compounds with high boiling points and low corrosion qualities have been considered for use as reactor coolants and moderators. Those being considered, however, have a greater tendency to leak than does water. A program to evaluate mechanical closures to be used for a leak-tight system for organic fluids has been established. Report HW-59446 covered descriptions of the facility used in this study and the primary results of tests covering two liquids, fittings, and instrumentation. This report will cover final results and other pertinent information.

In some engineering applications it has become necessary to operate equipment containing small diameter rods or tubes oriented parallel to flow stream. In the case of several nuclear reactors such as the Plutonium Recycle Test Reactor and the S. S. Savannah Maritime Reactor, bundles of small diameter rods are used as the fuel elements. The situation also has application to heat exchangers. A method for accurately predicting the pressure drop characteristics of various bundle configurations would be helpful in the design and selection of equipment. Some progress has been made toward gaining a greater knowledge of the bundle characteristics under low temperature conditions. This report includes the development of relationship for the effect of temperature on pressure drop.

The Hanford Remote Pipetter has developed into a very useful tool for routine pipetting by semi-skilled non-technical personnel. Radiation exposure to the operators has decreased to normal background levels as proper shielding exists between the sample and the operator. The results achieved by the pipetter have demonstrated its flexibility and simplicity of operation.

Report containing the results of a preliminary study of a design concept for a graphite-moderated pressure tube reactor. Topics include reactor design, operating procedures, subsystems, hazards analysis, and economic potential. Appendices begin on page 174.

This article presents data on the effects of gamma radiation on the physical properties of a number of different classes of plastics materials of construction which were screened to determine their capabilities and limitations for service in applications where ionizing radiation exists. The irradiations were carried out in air at ambient temperature at normal atmospheric pressure to various gamma radiation doses up to 1*10^9 r depending upon the stability of the materials to radiation exposure. The different classes of materials and materials within a class are compared.

This report describes the development of an ultrasonic instrument for resin level measurements in an ion exchange column.

Report that "describes the development of a prototype test chamber in which sections of irradiated pressure tubes from the Hanford [Laboratories] reactors are burst at elevated temperatures" (p. 2).

This report describes and evaluates the Hanford 105 reactor building structures' ability to withstand an internal pressure increase. The means by which their roof and wall surface would contain a pressure buildup 0.3 psi, and prevent contaminant release which might accompany a nuclear incident are discussed. Prototypes of the B, D, DR, F, and H reactor block wall configuration, the corrugated transite roof of the K reactors, and the corrugated transite walls of the K and C reactors are evaluated. Methods of securing certain building components are described, and a comparison of several candidate sealant coatings presented for consideration. These tests were performed at the request of the Design Operation, as part of CG-791, an existing reactor containment program. This series of tests represents only a part of the overall modifications program. A study of the reactor building containment design criteria is available in a Hanford document, HW-59236, by T. O. Brown.

The prompt administration of zirconium citrate was at least twice as effective as the prompt administration of calcium disodium salt of ethylenediaminetetraacetic acid (CaEDTA) in preventing deposition of plutonium in the skeleton. On the other hand, CaEDTA was twice as effective as zirconium citrate in preventing the deposition of plutonium in soft tissues. The combined administration of zirconium citrate and CaEDTA was the most effective treatment for preventing the deposition of plutonium in the total rat. Zirconium malate offered no advantage over zirconium citrate, and appeared to be somewhat more toxic. Three doses of the zirconium salts over a four-day period were no more effective than a single dose.