The electrical characteristics of a short (2{beta}{lambda}=0.4 m) resonator with large modulation (m=4) have been studied using the three dimensional codes, MAFIA. The complete resonator, including the modulated electrodes and a complex support structure, has been simulated using {approximately} 350,000 mesh points. Important characteristics studied include the resonant frequency, electric and magnetic fields distributions, quality factor and stored energy. The results of the numerical simulations are compared with the measurements of an actual resonator and analytical approximations. 7 refs., 3 figs., 1 tab.

The AFEL (Advanced Free-Electron Laser) Project at Los Alamos National Laboratory is presently under construction. The project's goal is to produce a very high-brightness electron beam which will be generated by a photocathode injector and a 20 MeV rf-linac. Initial laser experiments will be performed with a 1-cm-period permanent magnet wiggler which will generate intense optical radiation near a wavelength of 3.7 {mu}m. Future experiments will operate with slotted-tube'' electromagnetic wigglers (formerly called pulsed- wire'' wigglers). Experiments at both fundamental and higher-harmonic wavelengths are planned. This paper presents results of INEX (Integrated Numerical EXperiment) simulations of the optical performance of the AFEL. These simulations use the electron micropulse produced by the accelerator/beam transport code PARMELA in the 3-D FEL simulation code FELEX. 9 refs., 4 figs., 6 tabs.

A self-concentrating waste tank located at the Strontium Semiworks Facility in the 200 East Area of the Hanford Site will be decommissioned following waste removal. During a previous decommissioning phase, the tank, thought to be empty, was filled with grout to prevent it from collapsing over time. Several years later, an agitator rod was pulled from within the tank and found to contain significant amounts of radiation, indicating there was still radioactive waste in the tank. Several alternative waste-removal options have been researched and evaluated. It is concluded that before the waste is to be disposed, the grout must be removed. This paper addresses that effort.

The formation and radiative properties of clouds are poorly parameterized in numerical climate models, especially marine boundary layer clouds. Twomey (1991), after describing the importance of cloud microphysics to the climate problem, states Clearly, many more field measurements and laboratory experiments are called for, rather than endless repetitions of computer simulations that are closely related to each other and parameterize in very similar ways.'' The effort described here is a field experimental effort supported by the Department of Energy under its Quantitative Links'' program. The project is called Ship-Trail Evolution Above High Updraft Naval Targets (SEAHUNT). The purpose of this study is to improve our understanding of the meteorological context in which ship trails and other perturbations to marine boundary layer clouds occur. 8 refs., 6 figs.

Aspects of recent measurements of the mesonic and non-mesonic partial decay rates of {sub {Lambda}}{sup 5}He, and {sub {Lambda}}{sup 12}C are discussed. We comment on what the experiments tell us about the spin-isospin structure of {Delta}S=1 weak interaction in the nuclear environment. 14 refs., 1 fig.

None

The objective of this work is to develop a regenerable activated-bauxite sorber alkali monitor that requires no high-temperature/high-pressure sampling line for the reliable in situ measurement of alkali-vapor concentration in the exhaust from the pressurized fluidized-bed combustion of coal. 11 refs., 2 figs., 1 tab.

The present rate of development of high-temperature superconductors (HTSs) is sufficiently rapid that there may be opportunities for their use in contemporary fusion devices such as the International Thermonuclear Experimental Reactor (ITER). The most likely 1application is for delivering power to the superconducting magnets, especially in substituting for the current leads between the temperatures of 4 K and 77K. A second possible application of HTSs is as a liquid-nitrogen-cooled power bus, connecting the power supplies to the magnets, thus reducing the ohmic heating losses over these relatively long cables. A third potential application of HTSs is as an inner high-field winding of the toroidal field coils that would operate at {approx}20 K. While the use of higher temperature magnets offers significant advantages to the reactor system, it is unlikely that tested conductors of this type will be available within the ITER time frame. 23 refs., 2 figs.

This report documents the development of a current transformer system used to measure pulsed ion beam currents with a wide dynamic intensity range (nA to mA, and factor of 10{sup 6}). Peak beam currents at the LAMPF accelerator typically range from 100 to nA to 40 mA with pulse widths varying from 30 to 1000 {mu}s. Signal conditioning of the peak current output provides an average current readout with a range of 1 nA to 2 mA, noise of approximately {plus minus}0.5 nA, and accuracy of {plus minus}0.1%. Since the system has proved stable and highly reliable, calibration is performed yearly. The prototype unit was built in 1985 and the final production unit was completed in early 1989. 5 refs., 14 figs.

We have used a bioenergetically-driven, individual-based model (IBM) of striped bass as a framework for synthesizing available information on population biology and quantifying, in a relative sense, factors that potentially affect year class success. The IBM has been configured to simulate environmental conditions experienced by several striped bass populations; i.e., in the Potomac River, MD; in Hudson River, NY; in the Santee-Cooper River System, SC, and; in the San Joaquin-Sacramento River System CA. These sites represent extremes in the geographic distribution and thus, environmental variability of striped bass spawning. At each location, data describing the physio-chemical and biological characteristics of the spawning population and nursery area are being collected and synthesized by means of a prioritized, directed field sampling program that is organized by the individual-based recruitment model. Here, we employ the striped bass IBM configured for the Potomac River, MD from spawning into the larval period to evaluate the potential for maternal contribution to affect larva survival and growth. Model simulations in which the size distribution and spawning day of females are altered indicate that larva survival is enhanced (3.3-fold increase) when a high fraction of females in the spawning population are large. Larva stage duration also is less …

A proposal is made for high-power microwave transfer in space. The concept consists in a microwave power station integrating a multistage microwave free-electron laser and asymmetric dual-reflector system. Its use in space is discussed. 9 refs., 2 figs., 1 tab.

The X25 beam line at the National Synchrotron Light Source (NSLS) began full-power commissioning in 1990. It extracts radiation from a 27 pole hybrid wiggler, which produces up to 1.8 kW of total power with a peak horizontal density of 450 W/mrad and critical energy of 4.6 keV. The design and performance of the beam line optics are described, in particular the cooling of the first monochromator crystal. 28 refs., 5 figs.

Exclusive measurements of charged products and neutrons were performed for the reactions {sup 197}Au + (29 MeV/u) {sup 208}Pb and {sup 209}Bi + (28.2 MeV/u) {sup 136}Xe. The multiplicities of neutrons and charged particles are found to indicate collision impact parameters with different sensitivities. Characteristic correlations observed between massive products and light particles suggest the dominance of the damped-reaction mechanism in the Fermi energy domain. For central collisions, massive fragments are no longer observed, and a considerable fraction of the mass of the system is found disassembled into light particles and clusters. 75 refs., 19 figs.

The Advanced Photon Source (APS), a new synchrotron radiation facility being built at Argonne National Laboratory, will provide the world's most brilliant X-ray beams for research in a wide range of technical fields. Successful operation of the APS requires an extremely stable positron closed orbit. Vibration of the storage ring quadrupole magnets, even in the submicron range, can lead to distortion of the positron closed orbit and to potentially unacceptable beam emittance growth, which results in degraded performance. This paper presents an overview of the technical approach used to minimize vibration response, beginning at the conceptual stage, through design and construction, and on to successful operation. Acceptance criteria relating to maximum allowable quadrupole magnet vibration are discussed. Soil properties are used to determine resonant frequencies of foundations and to predict attenuation characteristics. Two sources are considered to have the potential to excite the foundation: far-field sources, which are produced external to the facility, and near-field sources, which are produced within the facility. Measurements of ambient ground motion, monitored to determine far- field excitation, are presented. Ambient vibration was measured at several operating facilities within Argonne to gain insight on typical near-field excitation sources. Discussion covers the dynamic response characteristics of …

A major center with emphasis on validation of nondestructive inspection techniques for aging aircraft, the Aging Aircraft NDI Development and Demonstration Center (AANC), has been funded by the FAA at Sandia National Laboratories. The Center has been assigned specific tasks in developing techniques for the nondestructive inspection of static engine parts, assessing inspection reliability (POD experiments), developing test beds for nondestructive inspection validation, maintaining a FAA library of characterized aircraft structural test specimens, and leasing a hangar to house a high flight cycle transport aircraft for use as a full scale test bed. 3 refs.

Samples of the amino acid valine were irradiated by 2.5 MeV-Ar, 0.8 MeV-Kr and 1.0 MeV Xe beams from the Argonne Dynamitron accelerator in order to study the energy distributions of ejected secondary ions. For Kr and Xe the nuclear stopping power exceeded the electronic stopping power by a factor 2 or 3, respectively, but the functional shape of the energy distributions and the mean ejection energies (0.9--1.4 eV) indicated that the molecular ions (M{plus minus}H){sup {plus minus}} are desorbed by an electronic sputter process. Contributions of atomic collision cascades were observed for the H{sup {minus}} ion. In the second part of the article, the overall dependence of molecular ion yields on the electronic energy loss is discussed in the framework of recent desorption models and the structure of the nuclear track.

We discuss the interplay between direct capture, valence capture, and compound-nuclear capture in attempting to explain the vast amount of capture data for light-mass nuclei. 13 refs.

Design of small surface water monitoring stations associated with waste sites requires an approach that balances several problems. The monitoring site must have a capacity for a wide range of flows, allow accurate measurements over the full performance range, minimize effects from accumulation of contaminated sediments, and minimize costs of construction and operation. Selecting a station design that takes these factors into consideration can be done systematically through use of formal decision analysis. The paper discusses the effectiveness of various hydraulic structures as flumes and weirs to monitor stream flow and drainage. The process has produced the most viable alternative designs and yielded fully documented guidelines for designing new stations as they are needed. 7 refs., 6 figs., 3 tabs.

We consider the case of vapor condensation in a liquid pool, when the heat transfer is controlled by heat losses through the walls. The analysis is based on drift flux theory for phase separation in the pool, and determines the two-phase mixture height for the pool. To our knowledge this is the first analytical treatment of this classic problem that gives an explicit result, previous work having established the result for the evaporative case. From conservation of mass and energy in a one-dimensional steady flow, together with a void relation between the liquid and vapor fluxes, we determine the increase in the mixture level from the base level of the pool. It can be seen that the thermal and hydrodynamic influences are separable. Thus, the thermal influence of the wall heat transfer appears through its effect on the condensing length L*, so that at high condensation rates the pool is all liquid, and at low rates overflows (the level swell or foaming effect). Similarly, the phase separation effect hydrodynamically determines the height via the relative velocity of the mixture to the entering flux. We examine some practical applications of this result to level swell in condensing flows, and also examine …

A repetitive two-stage light gas gun for high-speed pellet injection has been developed at Oak Ridge National Laboratory. In general, applications of the two-stage light gas gun have been limited to only single shots, with a finite time (at least minutes) needed for recovery and preparation for the next shot. The new device overcomes problems associated with repetitive operation, including rapidly evacuating the propellant gases, reloading the gun breech with a new projectile, returning the piston to its initial position, and refilling the first- and second-stage gas volumes to the appropriate pressure levels. In addition, some components are subjected to and must survive severe operating conditions, which include rapid cycling to high pressures and temperatures (up to thousands of bars and thousands of kelvins) and significant mechanical shocks. Small plastic projectiles (4-mm nominal size) and helium gas have been used in the prototype device, which was equipped with a 1-m-long pump tube and a 1-m-long gun barrel, to demonstrate repetitive operation (up to 1 Hz) at relatively high pellet velocities (up to 3000 m/s). The equipment is described, and experimental results are presented. 124 refs., 6 figs., 5 tabs.

Efforts are increasing throughout the research community to improve the predictive capabilities of general circulation models (GCMs). The US Department of Energy's Atmospheric Radiation Measurement (ARM) program has stated its goals as improving the representation and parameterization of cloud radiative forcing and feedbacks in GCMs by a combined modeling and experimental approach. Along with ambient atmospheric conditions, including advection of water vapor and cloud nuclei from other regions, cloud dynamics depend on surface fluxes of heat and water vapor. The lower boundary of the GCM modeling domain, the earth's surface, exerts a strong influence on regional dynamics of heat and water vapor, and the heterogeneity in the surface features can be responsible for generating regional mesoscale circulation patterns. Changes in the surface vegetation due to anthropogenic activity can cause substantial changes in the ratio of sensible to latent heat flux and result in climate changes that may be irreversible. A broad variety of models for representing energy fluxes are in use, from individual leaf and canopy models to mesoscale atmospheric models and GCMs. Scaling-up a model is likely to result in significant errors, since biophysical responses often have nonlinear dependence on the abiotic environment. Thus, accurate and defensible methods for …

Soil infiltration of wastewater effluents is a widely practiced method of treatment and disposal/reuse throughout the world. Renovation of the wastewater results from a wide variety of complex physicochemical and biological processes. One set of processes is speculated to involve the accumulation of organic matter by filtration and sorption followed by formation of humic substances. This humic substance formation can effect the performance of soil treatment systems by contributing to soil pore clogging and reduction in hydraulic capacity, and by yielding reactive substances and an enhancement of purification processes. While there has been a wealth of research into the nature and genesis of humic substances in terrestrial environments, there has been limited research of humic substance formation during soil infiltration of wastewater. The purpose of the research reported herein was to determine if humic substances can form under conditions typical of those present during wastewater infiltration into natural soil systems. This work was conducted during 1989 to 1990 as a collaborative effort between the Centre for Soil and Environmental Research, located in Aas, Norway and the Institute for Water, Soil and Air Hygiene located in Langen, West Germany. 11 refs., 3 figs., 6 tabs.

The production of {pi}, K, and protons measured in the E802 spectrometer are studied for p+A and Si+A collisions. Systematic properties of particle spectra and rapidity density distributions are discussed in terms of centrality and reaction system. A detailed comparison of the data to the RQMD model, which employs the experimental acceptance and cuts are presented. 8 refs., 6 figs.

An x-ray beam position monitor has been developed and is currently operational at the NIST beamline X-24A of the National Synchrotron Light Source, Upton, NY. It was developed to accurately measure the vertical position of the synchrotron beam and to allow precise positioning of beamline optics. It is an area type monitor positioned 5.6 meters from the Tangent Point and precedes all beamline instrumentation. Vertical beam position is given by the differential photoemission current from two grids mounted on a Macor frame. The monitor also senses the total photon beam flux. 7 refs., 4 figs.