Aid in redesign of the calibration facility in order to: 1. Reduce the rate of exposure for calibration personnel below 1 mr/hr; 2. Reduce the rate of exposure outside of the 3745 Building; 3. Reduce the risk of breaking radium sources; 4. Improve the efficiency of calibration procedures by: a. Allowing calibration to be done faster; b. Providing several calibration ranges which can operate simultaneously in the present space allowed; c. Allowing instrument survey work to proceed while calibration work is done. A well-type calibration installation is proposed and a brief description of the required shielding is included.

FLOSS III is a third-generation version of a digital computer program which solves a one-dimensional difference representation of the momentum, energy, continuity, and state equations for turbulent, compressible gas flow in equivalent hydraulic channels. Extensive use of this program has been employed in the design and performance analyses of Pluto-type nuclear heat exchangers, and in the specific case of the Tory II-A test series, agreement was obtained to better than 5% for all experimentally measured parameters. The NOMAC and DASH-N programs combine the effects of up to thirty varieties of channels with the dependent boundary conditions imposed by a common inlet diffuser and exit nozzle. The resulting calculations yield performance information for blow-down facility and ramjet flight condition application of the heat exchanger.

During the past year notable progress was made in several laboratories on design for linear accelerators in the energy range up to and above 1 Bev. Interest in linacs for this energy centers on two possible applications: first, as injectors for 300 to 1000 Bev synchrotrons, and second, as sources of intense meson beams. To review this progress, a conference jointly sponsored by the Brookhaven National Laboratory and Yale University was held at Brookhaven during the week of August 20, 1962.

Using requirements of analyticity and the unitarity of the S-matrix we obtain the dependence of a transition amplitude on the invariant mass of two particles strongly coupled to other two particle channels. As an example, we consider the production of a Σπ state near the Y*₀ resonance assuming it is coupled to a KN state in an s 1/2 state.

This report covers the S-I-5-B-M fuel irradiation in the GETR Maritime Loop during the final quarter of fiscal year 1962 plus the month of July 1962 to conclude the irradiation program. The data are summarized in Section II.

This technical report presents measurements of the thermal expansion of five titanium carbide type cermets from 68 to 1800F. These cermets are designated by Kennametal, Inc., as K 138A, K 150A, K 152B and K 162B. They contain from 64 to 80 weight percent titanium carbide, 10 to 30 weight percent metal binder and 6 to 10 weight percent other carbides. The metal binders are cobalt, nickel, and nickel and molybdenum. An attempt was made to calculate the thermal expansion of each type cermet from thermal expansions of the constituents. The expansion of the mixture was computed by weighting and expansions of the constituents according to (1) weight percent of the constituents, (2) volume percent of the constituents and (3) according to a value developed for mixtures by P. S. Turner. It was found that expansions computed according to volume percent and by Turner's method agreed with measured values with +- 5 percent. The values calculated by weight percent were from 5 to 11 percent higher than the observed values. The thermal expansions of these cermets are compared with the expansions of a group of metals and alloys.

"Time of flight spectrometers for the study of neutrons emitted in charged particle reactions have become important in recent years, following the development of suitable photomultiplier tubes and electronic circuits for nanosecond (ns) timing measurements. The principle of operation is simple. The particles exciting the nuclear reactions in which the neutrons are produced fall on the target in bunches of the order of a nanosecond in width. the arrival of product neutrons at a organic scintillation counter (proton recoil) detector placed a few meters from the target gives signals which can be used to determine the flight time of the neutrons from target to detector. A time-reference pule corresponding to the arrival of beam pulses at the target is required."

The following quarterly report covers the period from May 16 to August 15, 1962. This report summarizes the progress being made on the study of the saturation and recovery of the hole which can be burned into the magnetic resonance band associated with the F-center in KCl.

This note describes some results of the study of single pion production in π⁻-p interactions at 4.65 Bev/c, using the BNL 20" Hydrogen Bubble Chamber. It is well known that the observability of some of the particle resonances (e.g. 33 Isobar and η) varies markedly with the energy of the incident particle. The ρ meson has been observed in π⁻-p interactions at 1.25 Bev/c and 1.9 Bev/c incident pion energies. Evidence will be shown that this resonance persists with the much higher incident pion energy used in the present experiment.

The following remarks are made on the applicability of the double dispersion approach to the Beth-Salpeter equation introduced previously. 1) Any invariant solution of the Bethe-Salpeter equation in ladder approximation satisfies the double dispersion representation when the total energy-momentum is space-lake. 2) There are some exceptional invariant solutions which are not given by the previous method in the equal-mass case, but the existence of such solutions is very unlikely in the unequal-mass case. 3) In the case of the general separated kernel the previous results give the correct solutions even if the kernel does not reproduce the double dispersion representation.

This report considers the theoretical evaluation of a system for gaining increased control strength and increased control lifetime and presents a theoretical model which is applicable to conventional multigroup diffusion theory.

Abstract: "The electron paramagnetic resonance (EPR) of color centers in additively colored KCl crystals is measured to observe the effects of optical bleaching at room temperature. Earlier measurements on the F-center are confirmed and the susceptibility is measured at 78 and 300 deg K over five decades of power, including the very low power region. The width and the saturation properties of the individual multiplets are studied in detail and the technique of making EPR measurements on inhomogeneously broadened lines is discussed. A calculation is presented which shows that a slight departure from a Lorentzian multiplet shape can account for the saturation data. The bleached crystals show a resonance which has a width of 35 gauss and a different rate of saturation than the F- center. This resonance is associated with the B-band which appears in the optical absorption."

Stability tests are to be made in the VBWR (boiling water reactor). The tests are of three types: steady state measurements, rod oscillator tests, and transient tests.

"This report is written as a supplement to LAMS 2539. It is hoped that one will be able to read LAMS 2539, with emphasis on the fourth part (Memorandum N-4-79OU by 0. Farmer), with this memorandum to bridge the gaps and understand more about the model used and what the KIB Program can be used for. The system is defined by subsystems or subprograms: Thrust System, Heat Exchanger, Neutron Dynamics, Rod Actuator Dynamics, and Thermocouple Dynamics. The original Kiwi-B Flow System is included in the first part of LAMS 2539. This has been replaced by the newer system which includes a turbo-pump (per R, Bohl & E. Wheatley). This system will not be included here. Recommendations are made for improvement and more work in certain areas."

This report covers the S-I-5-B-M* fuel irradiation in the GETR Maritime Loop during the fourth quarter of fiscal year 1961. The data are summarized in Section II.

Molecular sieves are synthetic zeolites which, when dehydrated, contain a network of empty pores and cavities that constitute almost 50% of the total volume of the crystals. They have the unique property of adsorbing within these cavities only those molecules that are small enough to pass through the pores of the crystals, Molecular sieves have a very strong affinity for water and other polar molecules. It is this selective property plus their stability and reasonable cost that make them of interest for the application described herein.

The increasing popularity of liquid-hydrogen targets in physics research has emphasized the need for containers with maximum beam transparency (i.e., thin walls and low Z) and suitable strength at cryogenic temperatures. Fabrication of a Mylar container satisfying these requirements is described here.

A need for a small vertical cylinder-type furnace arises frequently in the Chemistry Department at the Lawrence Radiation Laboratory (LRL). Adequate heat is the major requirement; close control or calibration is not usually necessary. A heating unit of this type can either be used for quickly concentrating solutions in centrifuge cones or, by the addition of a refractory pedestal--can be made into a crucible furnace for size 0 and 00 crucibles. Because much of the chemistry done at LRL is with radioisotopes, disposal of contaminated equipment is an important consideration. In general, furnaces are difficult to decontaminate, hence there was a need for a disposable type. Because nothing meeting the requirements seemed to be commercially available, the Health Chemistry Department made up a simple furnace that has proved useful.

From abstract: "This program was a study of the basic variables that affect electrostatic classification of heterogeneous aerosols of submicron size, especially below 0.1 [mu]."

Abstract: "This is the first interim report of a literature survey investigating the uses and technology of radioscopes in the countries of the world, with particular emphasis necessarily placed on those more highly industrialized nations. Part I includes a general summary of the quantity and quality of radioisotope work being performed in these countries. Among the outstanding radioisotope applications with respect to quantity is the work of Japan in chemical research, that of USSR in metals research, and that in the USA in medical research. A detailed qualitative examination of the relatively narrow region of radioisotope applications in leak detection is also presented. Part II of this report gives a direct comparison between the progress and status of the US and the USSR in the varied uses of radio-isotopes."

A system for scintillations from nuclear events has been developed and is presently in use at the Lawrence Radiation Laboratory. This paper primarily describes the pulsed light source used to simulate nuclear events; it also describes the necessary nanosecond pulse techniques to measure the light source parameters and to operate large numbers of lamps. Considerations concerning distribution networks are shown. Use of the light source as a spark gap trigger is also discussed.

The F-48 columbium base alloy maintains useful mechanical properties for structural application up to 2600 degree F. Short-time tensile and creep rupture strengths have been determined for four F-48 plates, each from a different heat and with a different work history. Flow testing in a high-temperature, high-pressure air stream has been conducted to study oxidation behavior of the bare meatal. Auto-ignition is found to occur at a stream temperature of 2600 degree F. The phenomenon appears to be temperature dependent only. Development of an oxidation protection coating, utilizing environmental flow test apparatus, is proceeding.

It is shown that a radial pressure gradient exists in the silver chloride when it is used as the pressure transmitting medium in Bridgman anvils. The gradient can be obviated by the use of circular sections of wire. The center of curvature of the wire hoop is made coincident with the anvil center. When the inner and outer diameters of the pyrophyllite retaining ring are 1/2 and 7/16" respectively, the pressure, P, is P = (0.725 + 0.468R) L where R is the fractional displacement from the center, and L is the average pressure as determined from the total load and area of the anvil face. The above appears to be valid to 125 Kbars. The Bismuth 6-8 transition is found to accur at 88+3 Kbars.

Calorimetric measurements by Rao and Giauque (1960) showed some unaccountable residual entropy in crystals of [formula] at low temperatures. We have investigated the crystal structure in search of an explanation of the disorder. The resulting structure offers no possibility of disordered rings of hydrogen bonds such as were found in [formula], nor do we find any other explanation of the entropy discrepancy.