This report analyzes a procedure based on the production of acetylene from the active water, with subsequent measurement of the ionization caused by the tritium beta particle. This eliminates the troublesome absorption on the chamber walls when hydrogen is used, and provides a rapid method for the preparation of the urine samples.

Abstract: This report gives the results of a radiochemical analysis of particles collected by electrostatic precipitation from ventilation air of the "B" plant at Hanford Works.

Abstract: "The niobium-oxygen equilibrium has been determined by metallographic examination of arc-cast alloys made of electron-gun-refined niobium metal and special purity niobium pentoxide. Two intermediate oxides, NbO and NbO2, melt without decomposition at 1945 C and 1915 C, respectively. Eutectic reactions exist between niobium and NbO and 1915 C and between NbO and NbO2 at 1810 C. Experimental supports a peritectic reaction between NbO2 and Nb2O5 1510 C. The maximum solid solubility of oxygen in niobium metal is 0.72 weight per cent."

Abstract: "The corrosion rate in 680 F water of the uranium-50 w/o zirconium binary alloy was found to be -0.20 mg/(cm2)(hr), and that of the uranium-40 w/o zirconium binary alloy was -0.34 mg/(cm2)(hr). Both alloys correlated uniformly, with no evidence of discontinuous failure. Normal variations in interstitial content in either alloy had no significant effect on corrosion behavior. Tantalum additions, in the range of 0.2 to 5 w/o, improved the corrosion rate of the uranium-50 w/o zirconium base, with a minimum rate of -0.06 mg/(cm2)(hr) for the 5 w/o tantalum alloy. The 5 w/o tantalum addition to the uranium-40 w/o zirconium alloy. The 5 w/o tantalum addition to the uranium-40 w/o zirconium alloy decreased the corrosion rate of the base to -0.11 mg/(cm2)(hr) in the [...] condition only. In either conditions, the 5 w/o tantalum alloy failed discontinuously. All other additions to both bases either had no effect or decreased corrosion resistance. These included aluminum, chromium, iron, molybdenum, nickel, platinum, tin, titanium, tungsten, and vanadium additions."

This report covers a study of the deformation characteristics of uranium in grooved rolls. The study's purpose was to provide a basis for possible improvements in the uniformity of the rolled rod produced for the Hanford and Savannah River reactors.

This report follows work performed to determine the effects of large boron additions on the fabricability and room-temperature tensile properties of various steels for reactor shielding.

The following report analyzes interactions of K+ and K- mesons and measures their lifetimes using a nuclear emulsion technique.

The following report investigates the possible use of thermal emf's to produce the plasma-containing magnetic field in a thermonuclear reactor.

The following report discusses the construction of two heavy-ion linear accelerators, one at the the University of California Radiation Laboratory and the other at Yale University. The goal for these accelerators is to produce ions of masses up to that of neon with energies of 10 Mev per nucleon.

"Characteristics of a pulsed, occluded-gas ion source, operating in a magnetic field, have been investigated. Mass spectra of hydrogen- and deuterium-loaded sources are presented. Constructional details of the source and its operating characteristics are discussed."

This report analyzes two high-current linear accelerators, the A-54--a 48.5 megacycle resonant cavity accelerator--and the A-48, that is under construction during the time this report is written.

The following report provides results from investigations of torsional vibration stresses in the drive shafts of two Westinghouse motor generator sets in 1952.

The following report describes a beta and gamma scintillation detector similar to what was used in previous decay studies, yet was modified to make it suitable for the analysis of mixtures of radio-nuclides.

Abstract. The physico-chemical methods of determining nitric acid and thorium nitrate in solutions containing these two materials were investigated. Conductimetric titration with sodium hydroxide can be used to determine nitric acid accurately. the titration of thorium nitrate requires a separate standardization of the base however, since a basic salt is precipitated rather the normal hydroxide. The titration of thorium is reproductible however, so and empirical standardization can be used. The measurement of the specific gravity and refractivity of the solutions provides a method of determining the concentrations in terms of these two variable. Equations for the concentrations in terms of specific gravity and refractively are given, both in pure solutions and in those saturated with methyl isobutyl ketone.

The change in the simple [formula] distribution of neutrons in a spherical lump of uranium caused by the distribution in velocities of thermal neutrons is calculated. If the calculated curve is fitted as well as possible by a simple [formula] curve, it is shown that the value of [formula] obtained in this way is a function of [formula], the radius of the sphere. For small radii the [formula] obtained in this manner will be as much as 25% greater than the [formula] corresponding to average velocity neutrons. The change in the thermal utilization caused by the distribution in velocities is discussed. The flux of neutrons into a sphere is calculated taking into account the velocity distribution and this is compared with the usual theory.

Abstract: "The first shielded isotope, 34th Br-82 has been isolated in fission. Its fission yield is about 3 x 10-(-5)%. This is a direct measurement of the yield of a primary fission product and gives direct information as to the distribution of nuclear charge among primary fission fragments of given mass numbers as discussed by Glendenin and Coryell."

"The injection of the E-layer electrons into the Astron reactor is described by following the electrons as they emerge from the anode of the 1-Mev electron gun through the various steps up to their injection in the reactor volume. Several problems are imposed by this injection process and their solutions are discussed briefly. The detailed mathematical theory and calculations will be presented in a separate paper now in preparation."

Abstract: "The effects of a number of ternary additions on the constitution, casting, and fabricating characteristics and the physical properties of aluminum-35 w/o uranium were investigated. Initial investigations were concerned with the effects of 3 w/o ternary additions on the microstructure and press-forging characteristics of the alloy. It was found that additions of this magnitude often introduced extrinsic phases in the alloy. At the 3 w/o level, additions of germanium, silicon, tin or zirconium inhibited the formation of UAl4 and thereby increased the content of the aluminum matrix in the alloy. It was also noted that these additions decreased the pressures required for extruding, and the tin addition also improved the homogeneity of cast shapes. Lead and palladium also improved the homogeneity of the cast material; however, neither of these was an effective inhibitor of UAl4 and free lead was detected in the alloy to which lead had been added at the ternary. From these studies it appears that tin and zirconium are as effective as silicon in enhancing the fabricating characteristics of aluminum-35 w/o uranium alloys, and may prove superior when evaluated on the bases of casting qualities and recycling characteristics."

Abstract: A study has been made of the cladding of solid and powdered delta-phase zirconium hydride is both red and flat shapes with stainless steel. The program included investigations of metallurgical bonding, both with and without the sore of metallic barrier materials. Types 304 and 347 stainless steel were used for cladding material. The intermediate barrier-layer materials used were niobium, molybdenum, a combination of copper and molybdenum, and a combination of copper and niobium. The pressure-bonding techniques, involving the use of gas pressure at elevated temperatures, was employed in this study. Variable times and temperatures with a constant pressure of 10,000 poi were utilized by produce bonding. In this study, the best results were archived is cladding delta-phase zirconium hydride directly with Types 304 or 347 stainless steel. Good bonds were obtained by pressure bonding at 1600 F for 3 or 4 hr subsequent to pressure bonding at 1900 F for 1 to 2 hr at a pressure of 10,000 poi. Partial bonding was achieved between niobium and zirconium hydride and molybdeum and girconium hydride.

The following report discusses laboratory investigations of the suitability of some commercially available limestone for neutralization of slightly acidic distillates.

The letter E. R. Irish/W. H. Swift to R.E. Burns and H. H. Hopkins, dated August 15, 1956, subject Plutonium Concentration Problems, requested information on corrosion of stainless steel, titanium, and tantalum in plutonium nitrate-nitric acid solution, with and without sulfate ion. Experimental conditions and results of tests designed to yield the requested information are given below.

A series of neutron multiplication measurements with arrays of 1 by 8 by 10 in. slabs of 93.4% U235-enirched uranium metal have been made to provide data from which safety criteria for the storage of these fissile units can be established. Each slab contained 22.9 kg of U235. A maximum of 125 unites was assembled. The arrays studied were cubic lattices of the units and were usually parallelepipedal in shape.

This report discusses the high-velocity collisions of two identical solid plates driven by high explosives. The collision data employs dural, mild steel, brass and lead, as well as experimenting with jetless and jet-forming collisions.

Abstract: "The counting efficiency of Pa²³³ has been determined by comparison of the counting rate of Pa²³³, under stated conditions, with the disintegration rate of U²³³ produced by Pa²³³ decay."