Abstract: "Thorium tubes were cold drawn from extruded tube stock and also from drilled hot-rolled rod. Total reductions up to approximately 85 per cent were accomplished by conventional tube-drawing methods, without an intermediate anneal. The hard-drawn tubes had high tensile strength, but the ductility, as indicated by flaring and flattening tests, was low."

This report covers the progress made on an intensive program to develop and evaluate UO2 as a possible fuel element for the PWR.

Abstract: "Diameter measurements of 25 slugs taken before and after a prolonged heat treatment showed no evidence of differences that would indicate blistering. The average effects of the treatment was different for the various slugs. Large differences in diameter measurements between slugs. Large differences in diameter between slugs and significant differences between indices and positions were found."

Quarterly report describing the progress and development of improved zirconium alloys for service in superheated water and steam. This report covers the period between July 1 to September 30, 1961.

In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UO₂ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.

Abstract: "Following nitrate removal by means of a three-stage hydrochloric acid digestion, uranium was reduced with chromous sulfate reagent. In an inert atmosphere, the quadrivalent uranium was titrated at 80-95[degrees] with standard ferric sulfate solution. The end point was obtained with a potentiometric cell including a platinum in-titrant reference electrode and a platinum indicator electrode. Application was made to various low leverl uranium solutions. For samples containing 1 - 12 milligrams or uranium, less than one percent error may be expected. Iron and chromium do not interfere."

Abstract: "A new method of determining 8-hydroxyquinoline by titration with electrolytucally-generated bromine has been developed. Results show good precision in the range 0.4 mg. to 1.6 mg. total 8-hydroxyquinoline, with 99% confidence limits of less than +/- 2%. An electronically-regulated constant current source, required by the method, is described. A new indicator system with high sensitivity to free bromine is discussed."

Abstract: "Small amounts of acetic acid, equivalent to 400 ul. of 0.3 to 0.13 g/L. can be titrated coulonatrically in the presence of a 10 to 25-fold excess of HN03 in 70%, isopropanol. An accuracy of +/- 0.1% and a precision of +/- 8.5% (99% limite) are obtained.

The purpose of the test used to make this report was to determine if anodizing could become a part of the canning operation prior to autoclaving, other factors permitting, or if it must follow autoclaving.

Abstract: "The valve-actuated pulse column is employed to give phase separation on each half cycle in the countercurrent flow cycle and provides independent control over each step in the cycle. The dependence on temperature of operation, on pulse frequency and amplitude, and on plate design and spacing has been studied for extraction and stripping of uranium with tributyl phosphate in a hydrocarbon diluent. It is found that the efficiency increases quite significantly as the temperature is raised regardless of the direction of transfer and this increased efficiency is accompanied by greater operational freedom. A decrease in hole size, decrease in plate separation and increase in frequency all lead to higher efficiency in agreement with the concept that small drops continually formed coalesced and reformed, lead to maximum interphase transfer. The high extraction efficiency of the column is probably aided further by the relatively sharp pulse produced."

Introduction: "In connection with conducting neutron experiments in a pit with earth and concrete walls, it was proposed that the background flux of neutrons might be reduced by lining the walls of the pit with a neutron absorber such as boron. To determine how much liner material would be desirable and what diminution in the neutron background could be expected, the following measurements were undertaken."

The following report investigates the cohesive energy of ionic crystal lattices in the alkali halides when at a high pressure.

Abstract: "A method has been devised and successfully used for marking a leaking pile process tube prior to its removal from the pile, such that subsequent location of the leak is more easily accomplished. An acetone solution of Testor's Dark Red Airplane Dope is poured into the suspect tube. The solution leaks from the hole and stains the surrounding area a light pink. To date the method has been used on tubes 3573F, 0486F, 0867F, and 3670F."

Technical report presenting the results of a study of the AEC thorium production facilities at Iowa State College, Ames, Iowa. Operating procedures, descriptions of equipment and a production cost analysis have been included in this study.

Technical report listing the errata for pages 2, 4, 5, 6, 7, and 8 for report CC-918.

Abstract. In the first section of this technical report a new method of extracting uranium from thorium nitrate solution is discussed. This method consists of extracting an aqueous solution of thorium nitrate, nitric acid, sodium sulphate, and potassium thiocyanate with hexone. By this procedure, using an equal volume of hexone it is possible to extract 83 percent of the uranium while only 0.3 percent of the thorium is extracted. other experiments show that even greater separations are possible. In the second section of this report the use of antipyrine in solvent extraction procedures is discussed. Experiments are described in which 90 percent of the uranium is extracted while the thorium is extracted to the order of 3 to 5 percent.

The Alco Products Criticality Facility, site location, and operating procedures are described in detail, including the handling of fissionable material and the operating procedures for the safe performance of critical experiments.

This bibliography contains 145 references on the technology and apparatus used in the purification of argon, helium and xenon, and on the analysis for water, carbon monoxide, hydrogen, nitrogen, and oxygen, in the purification process. The references are arranged in four classifications: general, argon, helium, and xenon. Within each classification, the references are arranged in chronological order.

This partially annotated bibliography contains 334 references from papers published from 1945 to 1959 and includes references on the consumable - and nonconsumable - electrode vacuum arc melting process. References are also given on electrode preparation, furnace construction and operation, melting, sintering, vacuum techniques, and theory.

Abstract. the Laplacian of a beryllium metal lattice with 3.3 kg of uranium metal per cell and a volume ratio of 17.2 was measured in the removable region of the CP-2 machine. the sandwich effect with different moderators made interpretation of the observations very uncertain. The best result found was Be = 407 x 10(-6) cm(-2).

The following document reports the process of the recovery and decontamination of uranium using pentaether as the solvent extraction agent in a continuous flow system.

The following document presents an analysis on a phase-shift of p-p scattering with various measurements in Mev.

The preceding report follows an extensive study made at Hanford of methods and equipment to remove effectively the dissolver vent gases.

"The problem of explaining the lack of radiative muon decay in an intermediate charged vector meson theory is discussed. A possible way of introducing the charged vector meson to the theory of weak interactions is outlined in which renormalization is retained. However, if this way is used, the anomalous magnetic moment is calculated to be large, which is in contradiction with expectation."