Report discussing the 6-foot-4-inch wind tunnel and its auxiliary equipment has proven itself capable of continuous and reliable output of data. The real value of the tunnel will increase as experience is gained in checking the observed tunnel performance against full-scale performance. Such has been the case of the 8- by 8-foot tunnel, and for that reason the comparison in the calibration tests have been presented.

From Summary: "These properties compare favorably with those of the strongest similar alloys previously investigated. However, compared with a 60Cr-25Fe-15Mo alloy, the three cobalt-chronium-nickel cast alloys are inferior. A correlation of NACA and OSRD (Project NRC-8) data is presented, showing the variation of rupture strengths with temperature in the range of 1350^o to 2000^o for alloys."

From Introduction: "The data included in this report for Nimonic 80A alloy, for instance, represent experiments carried out to help clarify a production problem of grain-size control in an alloy which has been extensively used. The general procedure of the investigation was to carry out controlled laboratory experiments on samples of bar stock to find conditions of heating and hot-working which resulted in abnormal grain growth."

From Introduction: "This report presents only that portion of the data from the first ditching which was to be used roughly establish the accelerations experienced by the pilot and the amount of water pressure to which the fuselage structure was subjected during the ditching."

From Introduction: "The experiments in high-speed flow showed that an intense, high-frequency acoustic radiation is an essential feature of the problem. Consequently, a study of the acoustic field (involving schlieren observations and frequency and intensity measurements) was undertaken. This report presents the salient features of the study, which was mainly exploratory."

Report discussing a flight investigation of rocket-powered models of a tailless triangular-wing airplane configuration was made through the transonic and low supersonic speed range at the Langley Pilotless Aircraft Research Station at Wallops Island, Va. An analysis of the aerodynamic coefficients, stability derivatives, and flying qualities based on the results obtained from the successful flight tests of three models is presented.

From Introduction: "The heat-transfer data calculated from measured temperatures are compared with values calculated by the theory of Van Driest for a flat plate with laminar and turbulent boundary layers. In addition, the heat-transfer data from the flight tests are compared with data obtained from the Langley Structures Research Division of ground tests of an identical wing at a Mach number approximately equal to 1.99 in the pre-flight jet of the Langley Pilotless Aircraft Research Station at Wallops Island, Va. The stream static pressure is maintained at about 1 atmosphere, the free-stream temperature at about 75^o F, and the stagnation temperature at approximately 500 ^o F (ref.1)."

From Summary: "This report presents the aerodynamic measurements made during a Navy investigation conducted in the Langley 8-foot high speed tunnel to determine the actual human tolerance to wind blasts."

From Introduction: "In the present paper, a general method is developed for solving low-aspect-ratio problems involving shed vortex sheets. Both direct and inverse problems are considered. The method is applicable for all planar problems where the velocity boundary conditions can be made homogeneous by differentiation in either the streamwise or the spanwise directions."

This report presents the results of an investigation undertaken to determine the feasibility of making glide landings in gusty air. Wind velocities were measured at several stations between the ground and a height of 51 feet, and flight tests were made to determine the actual influence of gusts on an airplane gliding close to the ground.

From Introduction: "The purpose of this analysis was to investigate the use of function of intake-manifold temperature and pressure, exhaust back pressure, and engine speed in place of a ventri as a means of measuring engine air consumption and to determine if this function is suitable for automatic mixture control."

From Introduction: "The purpose of this analysis was to investigate the use of a function of intake-manifold pressure, exhaust back pressure, intake manifold temperature, and engine speed in place of a venturi as a means of measuring engine air consumption and to determine if this function is suitable for automatic mixture control."

Report presents the results of tests conducted at Stanford University of a 3-foot model propeller at four pitch settings and at 0 degree, 10 degrees, 20 degrees, and 30 degrees yaw.

Report discussing the progress of airplane performance and measured by speed.

This report is a revision of the altitude pressure tables of the United States standard atmosphere given in Technical Report No. 246 and the altitude range has been extended from 50,000 to 80,000 feet.

From Introduction: "Thrust augmentation of an axial-flow-type turbojet engine by burning fuel in the tail pipe is discussed in references 1 to 3. Thrust augmentation of the same turbojet engine by water injection at the compressor inlet is reported in reference 4."

From Introduction: "The research program included clean-up tests (unpublished data) and stability and control tests (reference 1) made in the NACA Langley full-scale tunnel. An investigation of the aerodynamic characteristics of the power-plant installation in the Cleveland altitude wind tunnel is discussed in this report."

From Introduction: "The purpose of the present report is to present a comprehensive summary of theoretical investigations of comprehensible laminar boundary layers which have been carried out since 1949 at the Polytechnic Institute of Brooklyn under the sponsorship and with the financial assistance of the National Advisory Committee for Aeronautics. The results of these investigations are contained primarily in references 1 to 7."

From Introduction: "The difficulties experienced in cooling the exhaust-valve seats of the rear-row cylinders have been overcome to a considerable extent by improving the mixture distribution through application of the injection impeller (reference 1) and by augmenting the flow of cooling air to the critical baffles (reference 2). Flight tests of this airplane (reference 3) indicated that the temperatures of exhaust-valve seats on rear-row cylinders were markedly lowered by these modifications and that airplane range, altitude, and gross weight previously limited by these temperatures could be greatly increased."

The following report covers an investigation that was done to supplement available experimental data on flow fields behind wings of an aircraft at supersonic speeds, as well as to furnish more quantitative information on the choice of the theoretical method for a given configuration and the accuracy to be expected when using such a method.

From Introduction: "The concept of supersonic combustion is by no means new, although little work appears to have been published on the subject. For example, an analysis of supersonic combustion to provide lift under a wing is given in reference 1. Reference 2 discusses applications to hypersonic ramjets being studied at the University of Michigan."

From Introduction: "The present report is the second prepared to give the results of an analysis of V-G data from commercial transport airplanes. The present report is concerned with an analysis of data obtained with Douglas DC-3 airplanes flying over three transcontinental routes in the United States."

From Introduction: "Acceleration and airspeed data obtained from V-G records collected during commercial transport operations (references 1 and 2) are being analyzed in some detail to determine the flight loads and operating speeds as functions of airplane, route, season, and prewar and wartime operations."

From Introduction: "The present report has been prepared to discuss the indications obtained from the University of Chicago turbulence indicator in relation to simultaneous measurement of atmospheric gustiness made by the NACA, which are summarized herein."