Report containing hazard and safety information regarding the Experimental Breeder Reactor-II in Idaho.

A preliminary design study, Phase I of the ALPR project, has been made in accordance with the Army Reactors Branch specifications for a nuclear "package" power plant with a 200-260-kw electric and 400 kw heating capacity. The plant is to be installed at the Idaho Reactor Testing Station as a prototype for remote arctic installations. The "conventional" power plant as well as the exterior reactor components are described in the accompanying report and cost estimate by Pioneer Service and Engineering Company, Architect-Engineers for the project."Nuclear" components of the reactor are designed by Argonne National Laboratory as described in the present report.

This seventh Annual Report is a summary of some of the progress in scientific and engineering research and development carried on at Argonne National Laboratory during 1961. As is customary in this series, only those portions of the total program that have reached such a stage that they may be of general interest are recorded. Thus, a comparison with the Annual Reports for 1959 (ANL-6125) and for 1960 (ANL-6275) will reveal the description of a generally different set of scientific activities. A more detailed presentation of any work covered in this report or of the many ANL projects not mentioned may be obtained by perusing the various progress and topical reports issued by the Laboratory during 1961. A list of the publications in the scientific journals during 1961 by Argonne personnel has been given as an Appendix.

Report of activities of Argonne Chemical Engineering Division, including advanced battery project, electro-chemical project management, advanced fuel cell development, utilization of coal, magnetohydrodynamics heat and seed recovery technology, solar energy, fast reactor chemistry research, nuclear fuel cycle studies, magnetic fusion energy research, and basic energy science.

Report issued by the Argonne National Laboratory covering a summary report of the work conducted by the Idaho Division. Experimental work and progress made on reactors are presented. This report includes tables, illustrations, and photographs.

Report issued by the Argonne National Laboratory discussing a summary of projects conducted with the Idaho Division. Descriptions of each project are presented. This report includes tables, and illustrations.

Measurement of radioactive carry-over was made on borax III operating at 300 psig and at power levels ranging from 4 to 14 mv. Decontamination factors of from 1.5 x 104 (at 14 mv) were obtained. These data are in essential agreement with those predicted by previous laboratory experimental work.

A fused fluoride process for dissolution of zirconium-uranium fuel alloys is being developed. The alloy is dissolved in an equimolar sodium fluoride-zirconium fluoride melt at 600°C by sparging the system with hydrogen fluoride. The uranium is volatilized from the melt as the hexafluoride by a sparging operation with fluorine or bromine pentafluoride vapor. This product is then decontaminated and purified by fractional distillation.

Development work was continued on the fused fluoride process for the recovery of enriched uranium from zirconium-matrix fuel alloys. The alloy is dissolved by immersing it in molten sodium fluoride-zirconium fluoride at 600°C and passing hydrogen fluoride vapor through the system.The dissolved uranium tetrafluoride in the melt is then volatilized as uranium hexafluoride by sparging with fluorine. The uranium hexafluoride product is purified and decontaminated by fractional distillation. Additional corrosion tests were made on a variety of metals in an effort to find a material of construction suitable for the fluorination step. All the metals tested, with the exception of Hastelloy B, were attacked rapidly in the fluorinated melt. The attack was particularly severe at the melt-gas interface when tests were made with partially submerged specimens of the metals.

Additional runs have been made in the six-inch, continuous-flow mixing chamber to study the rate of mass transfer between isobutanol and water. These runs were inconclusive because the effluents were mutually saturated. A new four-inch cell has been designed and is being fabricated; this will permit a reduction in the time available for mass transfer. Consideration has been given to other liquid pairs which may transfer more slowly than isobutanol-water. The system nitrobenzene-ethylene glycol appears attractive.

Development work continued on a fused salt process for the recovery of uranium from zirconium-matrix fuel alloys. The fuel is dissolved in a sodium fluoride-zirconium fluoride melt at 600°C by hydrogen fluoride sparging. The melt is then sparged with fluorine gas which volatilizes the dissolved uranium as the hexafluoride. The final decontamination and purification of the uranium hexafluoride are accomplished by fractional distillation. The testing of graphite as a container material for the hydrofluorination step was continued. Additional thermal cycling experiments were performed, using a helium sparge in equimolar sodium fluoride-zirconium fluoride melt at 600°C. The extent of penetration of the fused salt into the graphite was determined. No mechanical degradation was present. Dimensional change data were also obtained for graphite vessels in which the fused salt was sparged with hydrogen fluoride.

A final series of runs was made in a four-inch continuous-flow mixing chamber to study the transfer of isobutanol into water and nitrobenzene into ethylene glycol. Satisfactory techniques were developed to provide for the rapid analysis of these systems. In addition, a light-scattering correlation was prepared to provide a measure of the interfacial area of the yellow-colored nitrobenzene-ethylene glycol mixtures.

The feasibility of the coated metal crucible as a container for eutectic Al-Si alloy has been proven by test. Small, enamel-coated cast iron pots has been proven by test. Small, enamel-coated cast iron pots have successfully withstood the chemically aggressive Al-Si alloy and the adverse influence of an oxidizing atmosphere for a period of 3 months at 725°C. A similarly coated castiron crucible containing 450 pounds of eutectic Al-Si alloy was successfully tested for 144 days in a jacketing operation conducted at 595°-650°C. Under the same conditions, the normal service life of clay-bonded graphite and silicon carbide crucibles rarely exceeds 45 days. The coating material is a commercially available enamel capable of withstanding temperatures up to 790°C (1450°F). It is readily applied to the surface of a variety of ferrous metals and alloys; however, best results are obtained with alloys low in chromium and nickel which also have a low thermal expansion coefficient.

Errata sheet listing corrections to three pages of a report that describes a transistorized automatic counting and recording system built for the determination of foil-activation data.

A helix constructed of plutonium was made to test the Doppler temperature effect in ZPR-III. The helix, 1 inch in diameter and 6-1/4 inches long, contained 240 grams of delta-phase plutonium alloy encapsulated in titanium tubing. Four plutonium rods were extruded, joined together, and pushed into a titanium tube. This tube was swaged tightly over the plutonium rod, and the assembly was wound into a coil. Electrical leads to the coil were made by swaging copper tubing over the ends of the coil. The helix was tested by cycling about 500 times between 50°C and 190°C. The coil was heated with a current of 130 amperes and cooled with a blast of chilled helium. (1) Several helices of uranium(2) were cycled during the same tests. Despite the severity of the thermal cycles, the helices were undamaged.

The purpose of this program was to develop techniques and methods for producing fuel elements for the Experimental Boiling Water and Experimental Breeder Reactors. Methods for fabricating large tubes, flat plates, and small pins were investigated. The tube and plates contained U-5 w/o Zr-1.5 w/o Nb alloy and were designed for the EBWR. The pins contained U-2 w/o Zr alloy and were designed for the EBR. Cladding and end seal material of Zircaloy-2 was required for the water-cooled EBWR elements. Unalloyed zirconium was specified for cladding on the sodium-cooled EBR elements.

From Introduction: "The Fast Reactor Test (FARET) program is part of the United States Fast Reactor Program directed toward the demonstration of breeder reactors essential to the long-range goal of utilizing fertile fuels. (1) With-in this program is the current thinking that the early construction and operation of two or three prototype nuclear power plants of the order of 250 Mw(e) will lead eventually to the construction of practical and economic full scale breeder reactors by the early 1980's. (2)"

Ore concentrates have been converted directly to crude uranium tetrafluoride by hydrogen reduction and hydrofluorination in fluidized-bed reactors. Small-scale laboratory experiments demonstrated that this process can be extended to the production of crude uranium hexafluoride through fluorination of the uranium tetrafluoride in a fluidized bed. The satisfactory temperature range for the reaction lies between 300°C and 600°C. At 450°C the fluorine utilization is between 50 and 80 per cent. With excess fluorine, over 99 per cent of the uranium is volatilized from the solid material. The fluidization characteristics of certain materials are improved by the addition of an inert solid diluent to the bed.

Annual report of the Argonne National Laboratory Land Reclamation Program outlining the activities and research conducted during the year, various assessments and discussion, and related documentation.

This report is essentially a procedural account of the fabrication of certain enriched ZPR-III fuel plates for use in the ANL fast critical experiments at Arco, Idaho. A total of 208.92 kilograms of fully enrich, unalloyed uranium was processed. Of this amount 202.74 kilograms was received in the form of Oak Ridge type reduction buttons and 6.18 kilograms as pressed-powder plates. The completed fabrication consisted of 720 rectangular fuel plates having the nominal dimensions 3in. x 2in. x 1/8in. Their combined weight of 159.21 kilograms represents 76.22% of the weight of enriched material processed. The final distribution of the enriched material was as follows: [figure not transcribed].

A total of nine clad plates, containing uranium -5 w/o zirconium 1.5 w/o niobium alloy cores and clad with Zircaloy-II, were rolled in plain carbon steel jackets, heat treated, physically evaluated, and corrosion tested. All these plates were found to be within predetermined dimensional tolerance in width, thickness, length, cladding thickness, and core distribution. Improved control of wielding variables and of the length of the seal pin projecting above the end plugs resulted in the elimination of frequently observed segmented inclusions at the seal pin interfaces.

Report documenting the development phase of a multiple-source, urban atmospheric dispersion model that describes environmental transients.

The design of the Argonaut (Argonne Nuclear Assembly for University Training) was initiated by the Reactor Engineering Division of Argonne National Laboratory to satisfy needs for a low-power reactor facility within the Laboratory, and for training uses within the international School of Nuclear Science and Engineering (ISNSE). It was intended primarily for instruction and research in reactor physics. It was also considered as a possibility that it would fulfill the requirements of universities engaged in a program of nuclear science. The cost of the facility was to be kept to a minimum consistent with the high degree of inherent safety and a great amount of flexibility in the system. The basic design stemmed from the Knolls Atomic Power Laboratory Thermal Test Reactor* (TTR), now called Nuclear Test Reactor (NTR). Modification during the course of the work justified the new name "Argonaut".

From Introduction: "Descriptions of the functional requirements of the facility, together with preliminary concepts of methods for meeting them, are presented in this prospectus."