Apparent excessive concentrations of atmospheric contamination which were reported to be associated with an inert-gas-shielded consumable electrode arc wielding operation were studied to evaluate the potential health hazards. A study was made of the concentrations of metal fume and gaseous products of the operation as well as the spectrum of ultraviolet radiation. Recommendations for necessary controls were made.

The following documents are progress reports that follow chemical research studies in subjects such as ruthenium tetroxile distillations, extraction-scrub studies of zirconium and niobium, and oxidation of plutonium and stabilization of plutonium(VI) during extraction of IAF solutions.

Fractional absorption of gamma photons from a source by uranium or plutonium in solution is measured to determine concentration of these elements.

The following report describes two rapid, micro methods for the determination of UNH in Redox waste samples that had been developed fir the concentration range 0.2 to 100 g/l.

The following report describes polarographic methods that determine saturated aliphatic carbonyl compounds.

Calcination of liquid radioactive wastes, the process of converting metal nitrates and sulfates to oxides by heat, is under development at Hanford as a means of reducing these liquids to a dry powder or solid which can be stored safely. Radiant-heat spray calcination, one of the methods under study, was first investigated at the Oak Ridge K-25 Plant (1) as a possible method of calcining uranyl nitrate to uranium trioxide. The process has also been under extensive development at the Pulp and Paper Research Institute of Canada (2) and is designated by them as the Atomized Suspension Technique.

From statement of objectives: The purposes of the work described in this report are to provide data useful for designing and operating the dissolver solution clarification equipment to be installed in the Redox production plant.

This document will be concerned with the design, operation and maintenance of an automatic fuel element stamping machine. In order to take advantage of automatic unloading and length checking at the Acme-Gridley lathes in the 313 Building, automatic stamping of fuel elements is desirable. This, along with the need for a permanent canning line identification, resulted in a request for a machine to automatically stamp HAPO fuel elements on a production basis.

It is desirable that a reactor exhibit a self-regulating effect. If this were not true any disturbance to the reactor would result in a continual increase in the magnitude of the disturbance and the reactor would be unstable. In this investigation the reactor is considered to have two reactivity feed-backs: metal temperature and water temperature reactivity effects. These two variables through a metal temperature coefficient and water temperature coefficient determine not only the reactor stability but also determine many operational characteristics.

The work described was undertaken to provide data for nuclear safety studies concerning NPF reprocessing equipment. The original objective was to determine the uranium density and water (hydrogen) content of UO2-H2O mixtures ranging from compact centrifuge cakes to dilute slurries. The scope was later expanded to include mixtures of UO2 with hydrocarbon oil and mixtures of UO3-H2O.

Zirflex cladding waste is to be neutralized to pH 10 before transfer to waste storage tanks. This treatment causes the precipitation of zirconium oxide or hydroxide, which may lead to flow difficulties during transfer. The purpose of this investigation was to determine the physical properties and flow characteristics of the neutralized slurry to assist in the selectin of satisfactory transfer equipment and storage conditions.

A study of the variables involved in regeneration was undertaken to determine means of improving the regeneration efficiency and increasing the useful life of a reactor. Information gained from regeneration studies on a 4-inch-diameter by 8-foot-high column indicates that the present regeneration procedure is optimum as to quantity, concentration, and rate of addition of regenerant solution. It appears feasible to restore a plugged reactor by washing off all the silver nitrate from the packing and recoating by a normal regeneration cycle. Such a procedure could be utilized only if there is sufficient dead space in the bottom of the reactor to hold the wash solution.

The purpose of the Analytical Laboratory Manual is to assemble the basic procedures to be used for the analyses of materials employed within the Fuels Preparation Department. The methods appear in detailed steps suitable for laboratory use. This document replaces the "Essential Material Analytical Manual, " HW-25375 and "Metal Preparation Analytical Manual," HW-30862.

It is recommended that self-concentration of Purex wastes should not be started until much more complete knowledge is obtained of the conditions and reactions in these wastes. The presently planned tests in the Semi-Works will be a practical demonstration of the problems but will be of little value on the initial Purex wastes as these tests are being run almost concurrent with the filling of the first Purex storage tank.

This document describes required laboratory space and lists major equipment items necessary for a routine water quality laboratory in the P. R. T. R. Building. During discussions with R. D. Widrig and V. L. Rooney about the analytical sample program for the Plutonium Recycle Test Reactor, the author was asked to summarize equipment and space needs for a water control laboratory to provide routine analytical coverage on some of the water systems. Based upon 1706-KE-KER experience, some operating personnel may be used to provide analytical coverage on those routine analyses that are needed on around-the-clock basis with a savings of both time and money.

Thus we see that the derivation of elementary age theory is based on replacing the probability of collision governed by the Milne kernel by a Gaussian probability having the same zeroth and second moments. It is apparent that the age theory distribution will fail close to the source and at many free paths from the source.

The determination of various parameters such as thermal utilization, resonance escape probability, control rod calibrations and etc. is often accomplished by the measurement of the pile period due to some given perturbation. With the present thoughts being directed towards plutonium fueled reactors, it was felt worthwhile to discuss a few of the basic differences in pile neutron behavior due to the smaller fraction of delayed neutrons per fission of Pu239 and the larger fraction of delayed neutrons per fast fission of U238 than occurs from fission of U235 alone.

Calculations are presented regarding the effect of delayed neutrons in reactors fueled with mixtures of Pu²³⁹ and U²³⁵. Results are plotted to illustrate the change in thermal flux as a function of time for various positive or negative step changes in reactivity.

A preliminary report has shown the potential importance of organic reactor coolants to Hanford technology. The salient points are complete avoidance of corrosion problems and accomplishment of DPR performance with low pressure technique. The recommendation of the report that loop tests be made at Hanford is to be acted upon by Recirculation Technology Unit as soon as organic coolant material is received. To insure starting this experimental work fully abreast of the information available, a trip to sites working with organic coolants was made. Specifically, data were sought on practical details of design for handling organic coolants, heat transfer and fouling characteristics, corrosion of materials, and hazards of handling organics.

There is a continuing high interest in the development of organic coolant technology for application to future Hanford reactors. In addition to the HAPO organic program, two other programs are being sponsored by the Atomic Energy Commission. These include the Naval Reactor program, aimed at a reactor for ship propulsion, and the Civilian Power Reactor program. Because of the similarity of the technical efforts in the three programs, an attempt is being made to establish effective liaison among the programs. To this end, a visit was made to several sites actively engaged in organic development work. These sites and their primary functions are detailed in this report.

One of the UO2 fuel element designs proposed for use in the PTRT is the nested tubular concepts. This configuration compromises a central fuel todo surrounded by two concentric tubes of fuel (see sketch, appenx I.) . These UO2 shapes are to be jacketed in the Zircaloy and must be separated from each other and the procuresses tyvm vt annular spaces for the passage of coolant. The annuli are established and and maintained by the longitudinal ribs on the outer surface of all three jacketed fuel elements.

aluminum has been considered as a material for cladding fuel elements to be used in reactors cooled by high-temperature recirculating water. Aluminum is abundant, chap, has a relatively low cross section for thermal neutrons, and is readily fabricated into complex shapes. For these reasons, it appears that the use of aluminum rather than steel, Zircaloy or other candidate materials for fuel element cladding, would result in considerable savings in operating expense. The actual economics will of course depend on specific factors such as core materials and design of the reactor/. Aluminum appears particularly attractive for cladding the cores of aluminum-plutonium alloy proposed for the Plutonium Recycle Test Reactor since, in this case, the physical characteristics of the core and cladding would be practically identical.

A report which describes a number of experiments conducted to compare the effects of different methods of surface preparation on x-ray diffraction patterns of uranium obtained by the spectrometer technique.

Space has been reserved near the southeast corner of the 100-N Area for the 122-N Decontamination Facility. Previous correspondence between Burns and Roe, Inc and General Electric bae discussed various facilities which might be needed in the building. The concepts of the decontamination processes are under active development by research groups at Hanford. At present, there are several workable processes known; each one has one or more fairly serious drawbacks.