The following report studies an intermediate solid-fuel reactor system for aircraft propulsion.

"Centrifugal-casting techniques were investigated as a method of producing hollow cylindrical extrusion billets of aluminum-35 w/o uranium. Among the variables evaluated were melt temperature, mold and pouring-spout configurations, mold speed, and method of pouring. With the equipment employed it was found that the best castings were produced stilizing a pouring temperature of 2400 F, a heavy-walled steel cylinder rotating between 700 to 900 rpm for the mold and bottom-pouring technique employing a retractable pouring spout. Sound, nonporous billets 26 in. long and 5 in. in diameter were produced with a yield after machining of over 75 per cent of the original charge. The major losses occurred in the pouring spout-and-cup assembly. This loss is relatively unaffected by the casting length; and, therefore, coatings of greater length than 26 in. should results in even greater recoveries.

The following report examines primarily water and air factors that affect the quality of vacuum induction-melted uranium, yet follows experiments with other factors such as graphite and zirconium crucibles under dry and wet conditions, usage of hydrogen, oxygen, CO and other subject admitted to determine pressure-time relationships and residual gas compositions, as well as a study of water-gas reaction within the furnace.

The following report examines primarily water and air factors that affect the quality of vacuum induction-melted uranium, yet follows experiments with other factors such as graphite and zirconium crucibles under dry and wet conditions, usage of hydrogen, oxygen, CO and other subject admitted to determine pressure-time relationships and residual gas compositions, as well as a study of water-gas reaction within the furnace.

The following report observes infrared measurements in the region of OH bands, the C2O band vicinity, the low frequency end of the spectrum, and the region of the UO2 band on the system hexone - water - uranyl nitrate.

This report follows work with the purposes of determining the minimum amount of nitric acid required to dissolve slurries of stored metal waste, determining the stability of such metastable solutions as a function of their chemical compositions - primarily acidity - versus time and temperature, and to define a feed suitable for a low-acid TBP process flowsheet, and to indicate the range of variations in composition which can be tolerated for plant operation.

The following report records a total of forty-nine graphite core samples that have been bored from process tube blocks in the Hanford piles with the intention to provide results to indicate that core boring is an entirely practical operation over bore scraping in obtaining powder samples.

The following report discusses a method developed by Broida and Moyer, the method describes an emission spectrometer procedure for the determination of the ratio 100 D/(H4D).

From introduction: "The prime motive behind the experiments described in this report and in those preceding it in this series is the desire to reduce the number of Redox cycles necessary for decontamination from fission products of the plutonium and uranium streams sufficient to allow final disposition of these two products...This report deals with the mechanics of manganese dioxide handing, laboratory development of manganese dioxide scavenging, and a series of experiments at multicurie level combining ruthenium volatilization and manganese dioxide scavenging in stainless steel equipment."

Abstract: The data obtained from the radioassay of fish collected in vicinity of the Hanford Works between April, 1948 and June, 1950 are presented. Most of the radioactivity in the fish resulted from the concentration of p32 in the scales, bone, and certain visceral organs. The level of activity density in the fish was influenced by size, feeding habits and metabolic rate in addition to the activity density of the water. Changes in operation of nuclear reactors have resulted in progressive increases in activity densities of fish from one year to the next. The levels of radioactivity are not sufficiently high to be hazardous to either the fish or persons eating them.

Abstract: "Nuclear emulsion has been made in a manner similar to that of Demers and of Perfilov. An attempt has been made to achieve the grain size and sensitivity of Perflov's type P-9 Sensitive emulsion. Silver bromide grain sizes of essentially the same average size as Perfilov's were made from precipitations carried out over a narrow range of pAg's. Three brands of gelatin were tried. High sensitivity has not been achieved."

The following report is divided into two parts, both parts center around the effects of radiation on skin tissue. Part one focuses on superficial radiation, or Beta rays, while part two is on penetrating radiation, or neutrons and gamma rays.

The following report is focused on finding the measurements of low temperature heat capacities of neptunium dioxide. The entropy and the interpretation of the anomaly in the heat capacity curve will be dicussed."

The following document describes x-ray diffraction measurements for an approximate crystal structure for the beta phase of metallic uranium.

This report is part one of a series of two parts to a memorandum. The work discussed here presents the results of extensive calculations on the attention of gamma rays by shields of lead and iron.

The following report describes the crystal structures of NpC and Pu2O3 identified by x-ray diffraction.

This report discusses the contributions of the workers at Tennessee Eastman Corporation in the investigation of limiting conditions in the application of penta-ether (aka. dibutoxytetraethylene).

The following report discusses an equation derived by which the maximum allowable concentration in the atmosphere of a beta-omitting isotope for which lung damage is the limiting consideration can be calculated.

Abstract: A study of irradiated and normal Teflon by means of X-ray diffraction, infrared analysis, gas evolution, and visual examination is presented and discussed.

The following report describe the effect of plasma oscillations using a table-top model and the probable magnitude of the quantities needed to reach complete ionization.

Introduction: "The purpose of this work was to develop a high-frequency pulse generator that could be used in conducting research on high-rate trigger pairs and scaler circuits. The need for an instrument of this type arose because there was no parallel commercial instrument having this type arose because there was no parallel commercial instrument having a pulse recurrence frequency over approximately 200,000 pulses per second."

"This report was prepared for preliminary use only in the course of work under W31-109 Eng. 52, and the information contained herein may not be correct or in agreement with more recent experimental and operating data. Any values or opinions expressed in the report may only be those of the author, and the General Electric Company makes no representation or warranty (1) as to the value of this report for any purpose or (2) that any use of the report will not infringe the rights of others."

This report follows experiments on K[infinity], measuring the element for several red sizes, enrichments, and water-to-uranium volume ratios-(1, 2), by making use of the relation k[infinity] = 0M-[2]B-[2] (M-2 = migration area, B = buckling). The purpose of this report is to compare the experimental data for k[infinity] with values calculated from the four-factor formula k[infinity] = [eta][epsilon]pf.

Abstract: "This is a compilation of the material in several reports on the extraction of uranium from aqueous solutions with dibutyl carbitol. Data is presented concerning the optimum conditions for the extraction of the uranium and elimination of impurities."