Abstract: "A study of plastic flow during the extrusion of tubing was made by extruding colored Plasticine billets in a small-scale extrusion press. Decreasing the included angle of the conical die and tapering the ram end of the billet decreased the amount of coextrusion of the backer block into the tubing, lubricating the billet also decreased coextrusion."

The following report studies the dissolution of aluminum-canned thorium, providing results that suggest a dissolution cycle that permits the separation of the canned-slug components.

The following report provides equations that result from a seminar in reactor physics.

The rapid development of the field of atomic energy during the past few years now permits the exploration of applications to medicine involving new concepts in the treatment of cancer. One such has been the study of neutron capture therapy which is being developed at the Brookhaven National Laboratory.

The so-called Fluoride Volatility Processes refer to several proposed non-aqueous methods of processing irradiated fuel elements. In each of these methods, the uranium is fluorinated to uranium hexafluoride and then decontaminated by distillation. One of the methods, involving direct fluorination of the uranium by bromine trifluoride, has been under investigation at BNL since 1950; subsequently a pilot plant was built to study this step of the process. The objectives of the program were to investigate the technical feasibility of continuous dissolution, and to determine the effect of process variables on the capacity of the equipment; namely the effect of temperature, solution composition, flow rate, and uranium history on dissolving time as related to fuel elements of the types used at BNL, ORNL, and Hanford. The nominal capacity of the dissolver was five pounds of uranium per hour and all process equipment was fabricated of Monel. Special equipment components and numerous safety features were utilized. The major equipment development was a canned-rotor pump used for circulation of the dissolver stream through the heat exchanger. A system for continually charging slugs to the pressurized dissolver was also developed. Operation consisted of batch runs which were made with unirradiated BNL slugs in order …

It is assumed that when a hole appears in the cladding of a reactor fuel tube the fission products in the space between the fuel and the cladding will diffuse towards the hole. There they are swept away by the flow of steam past the hole. The process of diffusion is assumed to be governed by the ordinary diffusion equation with the boundary condition that the density of the fission products is zero at the surface of the hole. The diffusion equation is solved for the case of steady-state emission for a number of geometrical arrangements: long slit in plane surface; long slit in cylindrical surfaces circular hole in plane surface; circular hole in cylindrical surface; hole at end of cylindrical fuel rods and diffusion space of variable thickness. The time dependent solution of the diffusion equation is also found for a planar diffusion space. The effect of a temperature gradient is discussed.