Two water quality control labs are being provided for the the NPR. One, a "cold" lab, is located in the183 Building adjacent to the control room. Its primary purpose is to provide facilities for quality control of the output of the filter plant and the demineralizer plant. The other, a "hot" lab, is located in the 190 Building. Its primary purpose is to provide facilities for the quality control of the primary and secondary coolants, and the moderator coolant.

Facilities are to be designed for installation at Hanford for the reprocessing of irradiated, low enrichment fuels from non-production reactors, see Reference 1 and 2. The initial design of the processing facilities is to be based on processing the fuels discharged from the Dresden, Yankee, Piqua, Pathfinder and Shippingport (blanket elements only) reactors. Properties of the fuels and cladding make it impossible to completely process them in existing equipment, although the separation and decontamination can be performed in existing facilities once the fueks have been placed in solution form.

The measurement of a alpha-particle energy has been used by many radiochemical laboratories for the identification and analysis of alpha-active radio nuclides. The use of the total-ionization method for alpha-active radio-nuclides. The use of the total-ionization method for alpha energy in ionization chamber in which the alpha particle loses all its energy in ionization of the chamber gas. Collection of the electrons thus formed generates a voltage pulse across the chamber capacity which is proportional to the alpha particle energy. This pulse is then amplified using a suitable linear amplifier and fed to a pulses as to amplitude; the information is then recorded or stored. Since the pulse amplitude is proportional to the alpha energy lost to the chamber gas, the pulse height analysis can be used to estimate the energy of the alpha particles and in the case of several alpha emitters of different energies, the relative abundance of the alpha emitters can be determined. An alpha energy analyzer system using the ion collection method has been fabricated for use in radiochemical laboratories required to perform a large number of alpha energy determinations. This report describes the operation, maintenance, and application of this alpha energy analyzer system.

The following report observes infrared measurements in the region of OH bands, the C2O band vicinity, the low frequency end of the spectrum, and the region of the UO2 band on the system hexone - water - uranyl nitrate.

From introduction: "The purpose of this report is to summarize some of the observations on the dispersion and rate of disengaging of liquid-liquid systems and suggest some possible lines of future work."

Extraction systems involving chelating agents are widely used in radiochemical separations on a control basis due to the economy in time and equipment. In the case of waste streams, the element of interest is, by definition, at a very low concentration in the presence of gross fission product activities. The resultant large sample size necessary for a reliable analytical results creates a marked radiation hazard to laboratory personnel.

The following report records a total of forty-nine graphite core samples that have been bored from process tube blocks in the Hanford piles with the intention to provide results to indicate that core boring is an entirely practical operation over bore scraping in obtaining powder samples.

The Hanford water treatment plants were operated for a number of years with alum as a coagulant and activated silica as a coagulant and a polyacrylamide as a filter conditioning agent. (other polyelectrolytes may be used.) Sufficient time has elapsed to make a comparison of the two methods of operation valid and useful. Such a comparison is the purpose of this paper.

This report summarizes the research and development work carried out during March, April and May, 1959, for Budget Activity 2790 - Separations Development for Non-Production Reactors, The effort on Activity 2790 will enable Hanford to begin reprocessing in January, 1962, the fuel elements from power reactors which employ depleted or slightly enriched uranium fuels.

Introduction: "The observations reported in this document were obtained by C.H. Pitt during his assignment to the Corrosion Group September through October 1951. The tubes examined were: 1.) 0893-F Discharged for corrosion examination after leaking; 2.) 1488-DR Discharged to determine caused of obstruction; 3.) 2276-D Discharged for corrosion examination; 4.) 2376-D Discharged for corrosion examination; 5.) 1185-H Discharged to evaluate the effect of magnesium front dummies."

Abstract: "A method has been devised and successfully used for marking a leaking pile process tube prior to its removal from the pile, such that subsequent location of the leak is more easily accomplished. An acetone solution of Testor's Dark Red Airplane Dope is poured into the suspect tube. The solution leaks from the hole and stains the surrounding area a light pink. To date the method has been used on tubes 3573F, 0486F, 0867F, and 3670F."

Several tests are being performed and others being planned to investigate the role of heat transfer in corrosion processes. These tests are measuring both corrosion rates of metals (Zr-2 and X-8001 aluminum) under heat transfer, and the temperature rise associated with the buildup of the corrosion product. A brief description of these tests is given in this report.

A report which intends to acquaint the reader with the planning of the radiochemical laboratory designed for the analytical control of the radiolanthanum process and to define the terminal status of the design of this laboratory and its equipment.

"The following is an alphabetical listing of terms and units in common usage at HAPO. Other terms and definitions may be added as the need becomes apparent or as revisions or additional terms are issued by the NCRP and ICRP."

The purpose of this document is to describe the design and construction of a full-scale, electrically-heated model of a 19-rod PRTR fuel element for use in heat transfer experiments.

This document presents preliminary chemical flowsheets for cladding and core dissolution of zircaloy-clad uranium dioxide and stainless steel-clad uranium-molybdenum non-production fuels. These preliminary flowsheets together with existing process flowsheets should be adequate for process development in the currently forecast non-production fuels dissolution facility.

The Stack Effluent Radioisotope Monitor is an instrument which continuously measures and records the amounts of each of several different radioactive isotopes in the stack effluent of the Redox Facility. An informal report, HW-56151, describing the theory of operation and the circuits was prepared and is available to Hanford personnel from the technical files. The formal report, HW-56151 Rev, containing essentially the same information, is available from the Office of Technical Services, Department of Commerce, Washington 25, D. C.

This report analyzes a procedure based on the production of acetylene from the active water, with subsequent measurement of the ionization caused by the tritium beta particle. This eliminates the troublesome absorption on the chamber walls when hydrogen is used, and provides a rapid method for the preparation of the urine samples.

From introduction: "The prime motive behind the experiments described in this report and in those preceding it in this series is the desire to reduce the number of Redox cycles necessary for decontamination from fission products of the plutonium and uranium streams sufficient to allow final disposition of these two products...This report deals with the mechanics of manganese dioxide handing, laboratory development of manganese dioxide scavenging, and a series of experiments at multicurie level combining ruthenium volatilization and manganese dioxide scavenging in stainless steel equipment."

In an earlier study on criticality conditions for homogenous mixtures, 2/cm^2 was used as the neutron age for all mixtures of water and uranium. At the higher H/U ratios (low uranium concentration), the calculated critical parameters were in good agreement were in good agreement with experimental data. At the low H/U ratios (high uranium concentrations) the calculated critical parameters were smaller than the experimental ones (more conservative from a nuclear safety point view). These results indicated that using 27 cm^2 as the neutron age gives increasingly conservative results as the H/U ratio decreases.

Applications of sheathed (metal) thermocouples may require in many instances, the insertion of the thermocouple thermal junction into an area that must be hermetically sealed to the outside. This same area usually contains highly reactive heat transfer medium such as an eutectic alloy of sodium and potassium of sodium alone. When fissionable materials are being irradiated, fission products that are driven off would also be present and must be contained under varying temperatures and pressures.

Basic Studies. Sinterability experiments in the system UO2-PuO2 have continued, and data are available at one hour hold times across the UO2-PuO2 composition limits. Sintered densities appear to be markedly dependent on pressed densities with densification occurring very rapidly at higher pressing pressures. The following table illustrates the effect of one hour at temperature on final density for pure plutonium dioxide pressed to both 40 and 60 percent of theoretical density.

This report follows work with the purposes of determining the minimum amount of nitric acid required to dissolve slurries of stored metal waste, determining the stability of such metastable solutions as a function of their chemical compositions - primarily acidity - versus time and temperature, and to define a feed suitable for a low-acid TBP process flowsheet, and to indicate the range of variations in composition which can be tolerated for plant operation.

The hazards associated with several possible mechanical failures were analyzed for the PRTR. The consequences of these failures were evaluated for inclusion in the Final Hazards Summary Report.