The temperature characteristics associated with the handling of self-boiling radioactive wastes from the separations extraction processes in the Chemical Processing Department have necessitated several heat transfer studies. Earlier studies 1,2,3 defined the feasibility of self-concentration in existing waste storage facilities by determining the rate of heat generation from the decay of stored fission products and by defining the rate of heat loss from existing storage tanks to the surrounding soil.

Progress reports on Accelerator Development Program, High Frequency Program, beam dynamics in strong focusing linear accelerators, spiral beam buncher experiments, dynamical properties of Mark I, mechanical design, and Target Physics Program.

Presented herein is a philosophy for designing wideband multistage transistor amplifiers. The amplifier is visualized as an integral unit, the interstage networks constituting the elements of the amplifier unit. By designing the amplifier as a unit and adjusting the overall response (gain and bandwidth) with the interstage time constants, an increase in gain-bandwidth product is realized over the iteratively designed amplifiers. The resulting increase in gain-bandwidth product results from absence of the bandwidth shrinkage factor for multistage amplifiers. Formulas are derived for both a two- and three-transistor integrally designed wideband amplifier, in which shunt peaking networks are used for coupling. Experimental amplifiers were constructed following these formulas, and the observed performance agreed quite well with the calculations.

The angle errors of a rotary table can be accurately measured by stepping off the angles with an optical caliper and computing table error from (1) the error readings at each angle measured and (2) the cumulative caliper error that will be evident when the circle is closed at 360', eliminating the necessity of adjusting the caliper to the exact setting.

The Chapman-Jouguet pressure and equation of state of the high explosives PBX 9404 and LX04-01 have been experimentally derived. To assure a strictly one-dimensional geometry, spheres of high explosives were used. Experimental measurements of the radius-time history of material accelerated by the explosive gases were used in conjunction with finite difference calculations of the hydrodynamic equations to obtain some previous inaccessible data on high explosives.

Calculations are presented regarding the effect of delayed neutrons in reactors fueled with mixtures of Pu²³⁹ and U²³⁵. Results are plotted to illustrate the change in thermal flux as a function of time for various positive or negative step changes in reactivity.

It is recommended that self-concentration of Purex wastes should not be started until much more complete knowledge is obtained of the conditions and reactions in these wastes. The presently planned tests in the Semi-Works will be a practical demonstration of the problems but will be of little value on the initial Purex wastes as these tests are being run almost concurrent with the filling of the first Purex storage tank.

The Reactor Design and Development Unit has just completed a design concept for an intermediate capacity dual purpose reactor plant utilizing carbon steel for the primary loop portion outside the reactor. This design concept is reported in HW-33157 AD (2). The economic and engineering gains are of sufficient magnitude to justify an accelerated and extensive test program to completely evaluate the remaining unknowns in utilizing carbon steel as a stainless steel substitute. It is the purpose of this document to up-date and elaborate the information contained in the two previous documents (1). . It is the further purpose to define the program required to implement the design concept developed by the Reactor Design and Development Unit (2) utilizing carbon steel as the primary loop structural material.

This report presents the results of a reconnaissance geochemical survey of the Pratt quadrangle, Kansas. Field laboratory data is provided for 611 groundwater and 662 stream sediment samples.

Abstract: "The niobium-oxygen equilibrium has been determined by metallographic examination of arc-cast alloys made of electron-gun-refined niobium metal and special purity niobium pentoxide. Two intermediate oxides, NbO and NbO2, melt without decomposition at 1945 C and 1915 C, respectively. Eutectic reactions exist between niobium and NbO and 1915 C and between NbO and NbO2 at 1810 C. Experimental supports a peritectic reaction between NbO2 and Nb2O5 1510 C. The maximum solid solubility of oxygen in niobium metal is 0.72 weight per cent."

Abstract: "The corrosion rate in 680 F water of the uranium-50 w/o zirconium binary alloy was found to be -0.20 mg/(cm2)(hr), and that of the uranium-40 w/o zirconium binary alloy was -0.34 mg/(cm2)(hr). Both alloys correlated uniformly, with no evidence of discontinuous failure. Normal variations in interstitial content in either alloy had no significant effect on corrosion behavior. Tantalum additions, in the range of 0.2 to 5 w/o, improved the corrosion rate of the uranium-50 w/o zirconium base, with a minimum rate of -0.06 mg/(cm2)(hr) for the 5 w/o tantalum alloy. The 5 w/o tantalum addition to the uranium-40 w/o zirconium alloy. The 5 w/o tantalum addition to the uranium-40 w/o zirconium alloy decreased the corrosion rate of the base to -0.11 mg/(cm2)(hr) in the [...] condition only. In either conditions, the 5 w/o tantalum alloy failed discontinuously. All other additions to both bases either had no effect or decreased corrosion resistance. These included aluminum, chromium, iron, molybdenum, nickel, platinum, tin, titanium, tungsten, and vanadium additions."

Data listings from the area surveyed in a report on the Hot Springs containing averaged record data listings.

Data listings from the area surveyed in a report on the Hot Springs including single record reduced listings.

Abstract: The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Tonopah National Topographic Map NJll-5 is presented in Volume I and II of this report. The airborne data gathered is reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also.