The vacuum system for the bubble chamber must evacuate rapidly a volume of approximately 500 cubic feet and eliminate the outgassing of a surface area of approximately 50,000 square inches. The backstreaming of oil from the diffusion pump must be kept to an absolute minimum to prevent oil films forming on the window. The vacuum system must also provide the protection against liquid nitrogen and hydrogen/leaks to prevent pressure buildup.

Speed limits of decimal counting schemes based on binary-to-decimal conversion are considered. A simple "1-2-4-8" decimal logic is described, which is inherently as fast as the basic bistable. A decade for counting in 100-200 Mc/sec range, based on this logic and the tunnel diode-transistor bistable, is presented.

The blue-green algae, classed as primitive monerans, represent the lowest level of organization known to possess a higher plant type of photosynthesis. The role in photosynthesis of the phycocyanin in these organisms is particularly interesting from the point of view of ultrastructural biochemistry. It has been shown repeatedly that despite the primacy normally assigned to chlorophyll, the light absorbed by phycocyanin is used more efficiently for photosynthesis (equated with photosynthetic oxygen evolution). This property is all the more intriguing since Hill activity is very labile in these organisms; the loss being correlated with the release of phycocyanin. Then too, it has been observed that fluorescence at about 685 mμ, attributed to chlorophyll, is proportionately greater for wavelengths absorbed by phycocyanin. French and Young attributed the differential to inactive absorption by carotenoids in the "Soret" region of chlorophyll, but Duysens concluded that the magnitude of the difference observed by him was too great to be explained by screening. Duysens proposed the existence of two pools of chlorophyll of about equal size; one containing fluorescent, photosynthetically active chlorophyll in proximity to phycocyanin, the other nonfluorescent, photosynthetically inactive and remote from phycocyanin.

From abstract: "This project was a study of electrostatic classification of submicron aerosols. Classification of particles as small as 0.006-[mu]-diameter was shown to be feasible, and good classification of atmospheric dust was achieved. However, a practical solution to the problem of overlapping between particles larger and smaller than 0.1 [mu], the point of minimum electric mobility, was not found."

Internal-conversion coefficients may be thought of as consisting of two parts: a usually dominant part which depends only on the atomic number and the nuclear transition energy, and a usually small part depending explicitly on nuclear transition matrix elements. This latter part arises from the penetration of the converting atomic electrons within the transforming nucleus.

The discovery of the vector meson which mediates the weak interactions, W,1 would be of extreme importance for weak interaction physics and for field theory in general. The W, if it exists, will be made in a variety of processes such as v+N →W+ + e- + N, or n- + P →W- + P, or, as studied in this note, P + P → D + W+. The W couples to leptons with a dimensionless constant [constant not transcribed] where G is the Feral constant defined t=so that [constant not transcribed]. Thus for [equation not transcribed] and the smallness of this constant is, evidently, what makes any of the above processes difficult to detect. The W may have a variety of decay modes.

A previous report on this subject (Brookhaven National Laboratory, AGS Internal Report, ECR-4) described in detail the methods of measuring the injected and accelerated proton currents in the Brookhaven AGS up to May 1961. At that time the accelerated current was measured by extracting the bunch frequency component of the signal given by a pair of radial position observation electrodes. The injected current was also determined by the signal induced on a similar pair of radial position electrodes. Absolute values were then determined from machine parameters and a wire measurement of the electrode sensitivities. Linac currents, however, were measured with transformers, calibrated by putting known current pulses through a single turn loop. As described in ECR-4, a crude current transformer was placed on the AGS ring and cross-calibration measurements were carried out using a half turn injected beam. The pickup electrode value was then found to be about 10% higher than that given by the current transformer. This amount of disagreement was within the estimated accuracy of the measurements and calibrations used at that time.

The experimental program described has had as its objective the determination of the pressure exerted by free fission gas in operating UO2-filled reactor fuel elements.

The problem of separation of beams of particles of different masses but of the same momentum at Bev energies is the subject of a great deal of study at several high energy laboratories. In this note we shall describe the problem and tabulate a few of the cogent parameters. Frequently the student of high energy interactions is faced with a beam of miscellaneous particles coming from an accelerator. By standard techniques this beam can be rendered approximately parallel and an inch or so in diameter. By passage through a magnetic field the beam can be analyzed in momentum. Now it frequently happens that the particles in which the experimenter is particularly interested make up only a small fraction of the beam and the exigencies of the proposed experiment may well demand that the background of undesired particles be drastically reduced. The problem is difficult because the velocities of the various particles are almost equal to each other and to the velocity of lights; this makes time-of-flight techniques relatively ineffective. The energies of the particles are almost equal so electrostatic separation also is difficult. Since the beam is already analyzed in momentum, further separation by magnetic means is impossible.

Sheline and Johnson made Mg28 through the reactions Si30(γ,2p)Mg28 and Mg26(α,2p)Mg28 in order to characterize and determine a decay scheme for the new nuclide. Lendner separated a magnesium fraction from the spallation products of the irradiation of chlorine, as sodium chloride, with 340-MeV protons. The 21-h activity that was present was deduced to be Mg28 from the 2.3-m half-life of the Al28 that was milked from it, as Sheline and Johnson had done.

Summary. A test rig has been designed to obtain basic two phase forced convection liquid metal heat transfer and pressure drop data for use in the design of liquid metal boilers. This engineering report includes background of the boiling problem, partial summary of work done by other investigators, the object, scope, engineering, and operations of this test rig, and a summary of reproducibility tests conducted in a water back-up rig.

Work performed during the quarter is summarized by direct measurement of fission gas pressure, loop operations, performance of UO2 fuel.

"Design work was completed and construction initiated on a prototype field altimeter based on the gas density dependence of Townsend discharge current in an electrical discharge. The design of an ion tracer air velocity meter for laboratory applications, and construction of three units were successfully completed. Theoretical and experimental support is presented, showing the applicability of the ion tracer system to the accurate measurement of linear gas velocity. The operating range of the laboratory meter is 150 to 2500 ft/min at ambient pressures between 200 mu and 30.0 mm Hg. Further investigations on the application of the ion tracer concept to flowrate measurements are presented. By generating velocity profile curves with an ion tracer calibrated thermoanemometer, it was possible to determine the flowrate for 2 flow and pressure conditions; 37.5 cfm at 19.6 mm and 75 cfm at 9.8 mm Hg. Comparison with a calibrated Rotameter technique was within 5% in both cases. Also presented are some preliminary investigations leading to the development of a generalized ion tracer flowmeter for low gas densities. Results of some supplemental electrical discharge experiments in rarefied atmospheres are described. It was observed that electrical oscillations could be produced in a low density gas discharge, …

Nusselt numbers have been calculated for heat transfer to fluids flowing through annuli under conditions of uniform heat flux and fully established velocity and temperature profiles. The following cases were considered: (a) laminar flow, (b) slug flow, (c) turbulent flow with molecular conduction only, and (d) turbulent flow with both molecular and eddy conduction. These Nusselt numbers were determined for two conditions: heat transfer from the inner wall only and heat transfer from the outer wall only. The results were correlated by semi-empirical equations. The final results obtained on cases (a), (b), and (c) are applicable to any fluid, whereas those obtained on (d) are for liquid metals only. Wall- and bulk-temperature relationships for the above four cases were also determined. These relationships were treated as dimensionless temperature ratios. Both the Nusselt numbers and temperature ratios were evaluated over the r1/r2 range, zero to unity; the former being the case of the circular pipe, and the latter, the case of infinite parallel plates.

In order to investigate the low frequency strain cycle fatigue for tubular sheath geometries an apparatus was designed and fabricated for laboratory and reactor experiments. The design of this apparatus is described herein.

This report covers the S-I-5-B-M fuel irradiation in the GETR Maritime Loop during the second quarter of fiscal year 1962. The data are summarized in Section II. Discussions on fuel performance, fuel environment (water chemistry), problems with loop operations, and the crud deposition program are included.

Maintenance of polarization of polarized protons in a linear accelerator is known to be feasible. Circular accelerators present a different problem, and the investigation of the interaction of orbit dynamics and particle polarization in general is undertaken. The equation of motion of the spin vector of a charged particle in a magnetic field as formulated by Bargmann, Michel, and Telegdi is utilized in the study of depolarization for several accelerators. High values of depolarization are obtained, and means for avoiding such depolarization are suggested. (D.C.W.)

The instrument (polychromator) described observes time-dependent spectral-line profiles by simultaneous measurement at nine different wavelengths of light intensity as a function of time. A cylindrical lens magnifies the dispersion of a Jarrell-Ash Model S2000 Ebert Monochromator and forms an image on a light-pipe solder. Light pipes transfer light from various sections of the image--i.e., different wavelengths--to photomultiplier tubes, and the responses are displayed on oscilloscopes. The instrument has been used to look at total wavelength spans of 15 A and 20 A.

Females heterozygous for a wildtype X chromosome from a Samarkand stock and an chromosome of the composition [formula] were tested for the frequency of X-chromosomal non-disjunction and segregation of the X's when Y chromosomes of different types were present in the females. The Y chromosomes used were 1) a normal unmarked Y, 2) [formula], 3) [formula] and 4) [formula] (a chromosome which arose in one of our experiments and has not yet been analyzed). Since this was only a preliminary test no attempt was made to isogenize the stocks. Larger scale experiments are planned in which these and other Y's will be used and the genetic background will be strictly controlled.

Most existing electron synchrotrons use betatron start for initial acceleration of the particles. The subsequent synchrotron acceleration is then performed with a nearly constant radio-frequency. Investigation of the effect of turn-on rate and initial energy spread is made mathematically. Several advantages are seen for such a technique. (D.C.W.)

A digital-to-analog converter is described which is a part of a system that converts punched-tape digital data to analog data in a series of points drawn by an x-y plotter. The converter is designed to plot accurately tapes that contain information other than coded numerical coordinates. Operation of the converter is also described along with format requirements and power supplies. (J.R.D.)

The analyzer can be operated either internally or externally. The 10 ma germanium discriminator is quiescently biased to 8.5 ma in its low-voltage state. An input signal current of 3.5 ma or more triggers it to its high voltage state. This triggers the oscillator. The oscillator signal is buffered and mixed in the bridge modulator with the reference radiofrequency signal from the cyclotron. The low-frequency beat note from the bridge modulator is squared up and passed to the beat zero univibrator which generates 0.7 mu sec signals each time the beat note passes through zero from positive to negative. The trailing edge of the beat zero univibrator is employed to terminate the time-of-flight measurement and to control the servo measurement. Drawings are included. (M.C.G.)

Quarterly report describing the progress and development of improved zirconium alloys for service in superheated water and steam. This report covers the period between October 1 to December 31, 1961 and was conducted by the United States and the European Atomic Energy Community (EURATOM).

The following report is the first semi-annual report of a literature survey designed to investigate the uses and technology of radioisotopes in the countries of the world from 1955 to the present. This survey includes two phases: 1) involves the direct comparison of radioisotopic work in all fields in various countries as demonstrated at international conferences. 2) involves a more detailed examination and evaluation of the individual fields of interest selected previously (Phase II is also expected to comprise the bulk of the remainder of this investigation).