Inroduction: "A study of the literature, particularly the work done by R. Strubl, I.W. Kolthoff and S.B. Smith, indicated that a polargraphic method for the estimation of T could be devised which would not sacrifice reasonable accuracy for rapidity. Work was begun with the intention of developing such a method."

Abstract. Some rather idealized considerations are given regarding the depth a warped rod presses into the ribs at the places of contact. It appears that this distance may, under some conditions, be of the order of 70 times greater than for a straight rod resting uniformly on the ribs.

Abstract. A summary of the effect of metal, carbon, silicon, and oxygen impurities upon the various sulfide refractories is given and the proper procedures for elimination of the impurities are discussed. CeS which is properly prepared can be handled in air without danger of catching fire or appreciable oxidation. 650 satisfactory crucibles have been made to date using sulfides which were screened and pressed in air with less than 0.5% oxygen pickup. The other cerium and thorium sulfides are even more inert to oxidation than is CeS. Phase diagram possibilities are discussed for the cerium and thorium sulfide and oxy-sulfide systems. Further study of the ThS has shown that ThS crucibles are the highest melting and least volatile of the sulfide crucibles and ThS may be used for remelting of some metals up to 2000 degrees C. ThS crucibles appear to be the most suitable containers for metal reductions.

"There are several constants which have been devised as numerical representations of the behavior of metals under the action of loadings which stress the metal within the range of elastic action. Some of these constants, such as Young's modulus of elasticity in tension and compression, shearing modulus of elasticity, and Poisson's ratio, are regularly used in engineering calculations. Precise tests and experience indicate that these elastic constants are practically unaffected by many of the factors which influence the other mechanical properties of materials and that a few careful determinations under properly controlled conditions are more useful and reliable than many determinations made under less favorable conditions" (p. 1).

When a slug has been displaced from its normal position the thickness of the water film is decreased over part of the surface, and higher temperatures may be expected where the film is thin. The experimental data necessary for an exact calculation is incomplete, but some approximate estimates ae made here with special assumption concerning the heat transfer coefficient h as a function of the angle p from the point where the water film is thinnest. Variation in water bulk temperature around the annulus due to poor mixing is not considered here.

Abstract. thorium can be precipitated as a salt of p-dimethylaminoazophenylarsonic acid at a pH of about 1.5. the precipitate, collected on a sintered glass filter is washed with dilute ammonium hydroxide to dissolve the dye. the amount of thorium is determined by measuring the concentration of the dye spectrophotometrically at a wavelength of 450 millimicrons. Zirconium, which interferes, can be separated and determined using the same reagent in strong hydrochloric. the behavior of thorium metal upon treatment with various acids and upon fusion withKHSO4 is described. three satisfactory procedures are given for dissolving the metal with sulfuric acid, phosphoric acid, and by a potassium hydrogen sulfate fusion. The laboratory was presented with the problem of analyzing for a large number of elements in O2 metal. the results of a systematic study of methods for effecting solution of the metal are offered here since they may be of some interest and use to other laboratories. The four methods which effected complete solution of the metal are (1) Sulfuric acid method; (2) Fusion method; (3) Phosphoric acid method; and (4) Nitric acid-hydrofluoric acid method.

It is the purpose of this report to set forth in detail the ore reserve tonnages of this district as determined from field data and the detailed geologic report of January 1944

A map related to a Supplementary Report on the Green River District, San Rafael Swell Area, Utah

.Technical report describing the transference experiments. The carrying of zirconium and columbium by ferric hydroxide has a very marked dependence on pH. In the experiments it was noticed that the concentration of Zr activity in various solutions changed with time This indicated that the Zr was being adsorbed on the glass. The carrier free trace is adsorbed on glass. This effect must be considered in experiments with Zr tracer in glass apparatus.