This document will be concerned with the design, operation and maintenance of an automatic fuel element stamping machine. In order to take advantage of automatic unloading and length checking at the Acme-Gridley lathes in the 313 Building, automatic stamping of fuel elements is desirable. This, along with the need for a permanent canning line identification, resulted in a request for a machine to automatically stamp HAPO fuel elements on a production basis.

Discussing uranium deposits drilled at the Seven Mile Canyon in grand county, Utah.

A knowledge of the surface tension of metals is a valuable tool in many aspects of physical metallurgy. Surface tension is a prime factor in such phenomena as swelling, nucleation and growth, and corrosion by liquid metals, and is also of importance in brazing. casting, and sintering. This survey was initiated to facilitate the selection of an experimental technique for determining the surface tension of uranium in support of current swelling studies of irradiated uranium. It is believed that swelling in uranium in support of current swelling; studies of small bubbles of fission gases (krypton and xenon), and the forces resisting the expansion of these bubbles are the elastic and plastic flow energies and surface tension of the metal. Experimental techniques for the determination of surface tension of solids are still in the development stage, but three techniques appear to be most feasible. These methods are: (1) the mechanical method, in which a tensile lead is used to counterbalance the contractile force of surface tension; (2) the thermal etching method, involving measurement of the dihedral angle at the root of etched grain boundaries; and (3) the electron diffraction method, which analyzes surface tension by the amount of lattice distortion it …

Organic compounds with high boiling points and low corrosion qualities have been considered for use as reactor coolants and moderators. Those being considered, however, have a greater tendency to leak than does water. A program to evaluate mechanical closures to be used for a leak-tight system for organic fluids has been established. Report HW-59446 covered descriptions of the facility used in this study and the primary results of tests covering two liquids, fittings, and instrumentation. This report will cover final results and other pertinent information.

Quarterly report describing the progress and development of improved zirconium alloys for service in superheated water and steam. This report covers the period between October 1 to December 31, 1961 and was conducted by the United States and the European Atomic Energy Community (EURATOM).

The decontamination of the present Hanford reactors involves a once-through cleaning operation. Considerable interest has also been shown in determining the feasibility of this once-through technique for cleanup of certain portions of the NPR system. This report contains information on a series of tests performed in the 242-B single pass flow facility. Information concerning the following are presented: (1) Efficiency of decontaminating KER Loop 1 and 2 contaminated specimens. (2) Efficiency of decontaminating present reactor pigtails by different methods. (3) Areas that need further study.

Formulas derived from earlier work satisfactorily predicted low frequency ground effects resulting from the Pre-Gnome explosions, but they not predict high accelerations associated with high frequency ground waves. The Pre-Gnome experiments taken since indicated that accelerations and ground amplitudes are proportional to the explosive charge, but physical conditions limit extrapolation on this basis to relatively low yields. Predicted accelerations resulting from the 10 kt Gnome explosion in potash mines eight or more miles away will be somewhat less than from routine blasts in the mines. The compressional wave speed in the salt stratum of the area is about 14,000 feet per second.