A summary ls presented of the off-slte radiological safety actlvities of the U. S. Public Health Service during the Project Gnome operation. Topics dlscussed include: operational procedures; collection of data by aerial monltoring, mobile monitoring, potash mlne surveys, air sampling, milk sampllng, water sampling, soil and vegetation sampllng, and a film badge program; laboratory control, emergency measures; medlcal services; and veterinary activltles. It was concluded that no persons ln the vlclnlty of the Gnome test site recelved harmful amounts of radlation either lnternally or externally. (M.C.G.)

None

The lower Frio Formation in eastern Brazoria County, upper Texas Gulf Coast, was deposited in a high constructive deltaic environment in the Houston delta system. Constructive elements of the stacked, elongate to lobate deltas that were intersected in core are storm induced delta front splays, delta front slump deposits, and distributary mouth bar, distributary channel and delta plain assemblages. Reworked and winnowed abandonment facies that are volumetrically insignificant relative to constructive elements are subdivided into a crossbedded shoreface-foreshore subfacies and a fine grained cyclic sequence of storm deposits on the lower shoreface that represent a distal abandonment subfacies. Micropaleontological evidence indicates that deposition of constructive and abandonment facies took place in water depths of less than 120 feet.

An attempt was made to relate episodes of air pollution at Barrow, Alaska, containing vanadium, to the behavior of planetary waves in middle and high latitudes. A stationarity index for planetary waves is defined as the ratio between amplitudes computed from monthly mean maps and the mean amplitudes computed on a daily basis and averaged over the same month, irrespective of phase angle. Longitude-time sections of 500-mb height anomalies at various latitudes are related to vanadium pollution episodes at Barrow.

Tritium technology in the United States has advanced considerably since the 1988 Tritium Conferences in Toronto. This advance has come in facilities, processing and safety related technologies and in an ever increasing commitment to compliance related issues. The major laboratories in the US tritium programs continue to be (Westinghouse) Savannah River Site, EG G Mound, Lawrence Livermore National Laboratory, Sandia National Laboratory and the Los Alamos National Laboratory. Each of these Laboratories have made some significant changes in their programs and/or facilities in the past four years. 11 refs, 1 fig.

New Hot Laboratory Facilities which support three major research programs directed by the Los Alamos Scientific Laboratory of the University of California are described. For the Nuclear Rocket Propulsion Program, a hot cell addition to the Radio Chemistry Building at Los Alamos will be completed early in 1963, and construction is expected to start soon on the hot cell addition to the Maintenance, Assembly and Disassembly Building at the Nuclear Rocket Development Station in Nevada. Integral hot laboratories are designed in the facilities for the Ultra High Temperature Reactor Experiment and the Fast Reactor Core Test at Los Alamos. (auth)

A thick sequence of layered rocks occurs beneath the Phanerozoic platform strata which blanket the US midcontinent. Observed on COCORP deep reflection data in southern Illinois and Indiana and in SW Oklahoma and adjacent Texas, this sequence is locally 1--3 times as thick as the overlying Paleozoic cover, but the origin of this sequence, its ultimate lateral extent, and resource potential are unknown. The objective of this project is to seek and reprocess seismic reflection data provided by industry from the US midcontinent and together with the COCORP deep reflection data and information from the scattered basement-penetrating drill holes, to begin to constrain the distribution, origin and evolution of this enigmatic layered sequence, particularly to evaluate if sedimentary material may be an important constituent (i.e., deep gas potential).

Extrusion and rolling processes exhibiting large amounts of plastic flow are analyzed using a finite element technique that is based on a modified creeping viscous flow approximation. The technique, called the initial stress-rate method, iteratively corrects creeping viscous flow solutions to generate results that include elastic response. The momentum equations have been coupled with the energy equation to provide the capability to predict thermomechanical response during forming operations.

Efforts have been primarily directed toward evaluation of the room temperature molten salt electrolyte in terms of its overall performance for photovoltaic cells. Mass transport processes may prove to be the rate-limiting factor for such electrolytes, unless the concentration of the photo-active redox component can be increased and the solvent viscosity reduced. Acid-base surface chemistry of n-GaAs as occurs in aqueous systems, has been found present and its consequences will be further explored. The selection and optimization of PEC electrolytes is a complex task and we believe that a systems approach would facilitate in identifying the basic electrolyte properties needed. A preliminary analysis reveals that although some of the criteria for an electrolyte are definable precisely, others do require empirical experimentation. It can be concluded that relatively few electrolytes in current use are adequate and it would appear that greater efforts to develop electrolytes would be advantageous. The various types of electrolytes that could be used for PEC's have been identified. Good quality MoSe/sub 2/ single crystals can be grown and short circuit currents greater than previously reported have been achieved in an I/sub 2//I/sup -//Pt cell. A novel technique to produce photo-active films by anodization is being investigated, initially …

The Department of Energy (DOE) is preparing a site characterization plan for the candidate site in Deaf Smith County, Texas. The DOE has provided, for information and review, a consultation draft of the plan to the State of Texas and the US Nuclear Regulatory Commission. The site characterization plan is a lengthy document that describes in considerable detail the program that will be conducted to characterize the geologic, hydrologic, and other conditions relevant to the suitability of the site for a repository. The overview presented here consists of brief summaries of important topics covered in the consultation draft of the site characterization plan; it is not a substitute for the site characterization plan. The arrangement of the overview is similar to that of the plan itself, with brief descriptions of the repository system - the site, the repository, and the waste package - preceding the discussion of the characterization program to be carried out at the Deaf Smith County site. It is intended primarily for the management staff of organizations involved in the DOE's repository program or other persons who might wish to understand the general scope of the site-characterization program, the activities to be conducted, and the facilities to …

Twenty-three shale samples ranging in depth from 5194 ft to 13,246 ft from Gulf Oil Corporation No. 2 Texas State Lease 53034 well and 33 shale samples ranging in depth from 2185 ft to 15,592 ft from General Crude Oil Company/Department of Energy No. 1 Pleasant Bayou well were examined by x-ray techniques to determine the mineralogy of the geopressured zone in the Brazoria Fairway. Both wells have similar weight-percent trends with depth for a portion of the mineralogy. Calcite decreases, and plagioclase, quartz and total clay increase slightly. Within the clays, illite in mixed-layer illite/smectite (I/S) increases and smectite in mixed-layer I/S decreases. Four minerals have distinctly different trends with depth for each well. In the No. 2 Texas State Lease 53034 well, potassium feldspar and mixed-layer I/S decrease, kaolinite increases, and discrete illite is constant. In the No. 1 Pleasant Bayou well, potassium feldspar and kaolinite are constant, mixed-layer I/S increases, and discrete illite decreases.

The advanced servomanipulator (ASM) slave was designed with an anthropomorphic stance, gear/torque tube power drives, and modular construction. These features resulted in increased inertia, friction, and backlash relative to tape-driven manipulators. Studies were performed which addressed the human factors design and performance trade-offs associated with the corresponding master controller best suited for the ASM. The results of these studies, as well as the conceptual design of the dual arm master controller, are presented. This work was performed as part of the Consolidated Fuel Reprocessing Program at the Oak Ridge National Laboratory. 5 refs., 7 figs., 1 tab.

None

Strong free convection airflows occur within passive solar buildings resulting from elevated temperatures of surfaces irradiated by solar energy compared with the cooler surfaces not receiving radiation. The geometry of a building has a large influence on the directions and magnitudes of natural airflows, and thus heat transfer between zones. This investigation has utilized a variety of reduced-scale building configurations to study the effects of geometry on natural convection heat transfer. Similarity between the reduced-scale model and a full-scale passive solar building is achieved by having similar geometries and by replacing air with Freon-12 gas as the model's working fluid. Filling the model with Freon-12 gas results in similarity in Prandtl numbers and Rayleigh numbers based on temperature differences in the range from 10/sup 9/ to 10/sup 11/. Results from four geometries are described with an emphasis placed on the effects of heat loss on zone temperature stratification shifts.

Maricopa county is the area of Arizona receiving top priority since it contains over half of the state's population. The county is located entirely within the Basin and Range physiographic region in which geothermal resources are known to occur. Several approaches were taken to match potential users to geothermal resources. One approach involved matching some of the largest facilities in the county to nearby geothermal resources. Other approaches involved identifying industrial processes whose heat requirements are less than the average assessed geothermal reservoir temperature of 110/sup 0/C (230/sup 0/F). Since many of the industries are located on or near geothermal resources, geothermal energy potentially could be adapted to many industrial processes.

A mercuric iodide energy dispersive x-ray spectrometer, with Peltier cooling provided for the detector and input field effect transistor, has been developed and tested in a scanning electron microscope. X-ray spectra were obtained with the 15 keV electron beam. An energy resolution of 225 eV (FWHM) for Mn-K/sub ..cap alpha../ at 5.9 keV and 195 eV (FWHM) for Mg-K line at 1.25 keV has been measured. Overall system noise level was 175 eV (FWHM). The detector system characterization with a carbon target demonstrated good energy sensitivity at low energies and lack of significant spectral artifacts at higher energies. 16 refs., 5 figs.

Theoretical work of two decades ago adequately explained the transport behavior and effectively guided the development of thermoelectric materials of high conversion efficiencies of conventional semiconductors (e.g., SiGe alloys). The more significant contributions involved the estimation of optimum doping concentrations, the reduction of thermal conductivity by solid solution doping and the development of a variety of materials with ZT approx. 1 in the temperature range 300 K to 1200 K. It was also shown that ZT approx. 1 is not a theoretical limitation although, experimentally, values in excess of one were not achieved. Work has continued with emphasis on higher temperature energy conversion. A number of promising materials have been discovered in which it appears that ZT > 1 is realizable. These materials can be divided into two classes: (i) the rare-earth chalcogenides, which behave as itinerant highly-degenerate n-type semiconductors at room-temperature, and (ii) the boron-rich borides, which exhibit p-type small-polaronic hopping conductivity.

A total of five hot springs and 25 thermal wells are located within the combined counties. The water discharged from these hot springs and wells may be suitable for applications such as process heat and space heating and cooling. Within Cochise county there are two large firms which are capable of using 70/sup 0/C (158/sup 0/F) geothermal water for their process heat requirements but the potential use of geothermal energy in Santa Cruz county is limited due to the absence of industry within the county. The amount of geothermal energy on line as a function of time under both private and city-owned utility development is also predicted using a computer simulation model.

Pima County is located entirely within the Basin and Range physiographic province in which geothermal resources are known to occur. Continued growth as indicated by such factors as population growth, employment and income will require large amounts of energy. It is believed that geothermal energy could provide some of the energy that will be needed. Potential users of geothermal energy within the county are identified.

None

On September 8-9, 2005, representatives of the Kansas Department of Health and Environment (KDHE), the Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA), and Argonne National Laboratory met at the KDHE's offices in Topeka to review the status of the CCC/USDA's environmental activities in Kansas. A key CCC/USDA goal for this meeting was to obtain KDHE input on the selection of possible remedial approaches to be examined as part of the Corrective Action Study (CAS) for this site. As a result of the September meeting, the KDHE recommended several additional activities for the Everest site, to further assist in selecting and evaluating remedial alternatives for the CAS. The requested actions included the following: (1) Construction of several additional interpretive cross sections to improve the depiction of the hydrogeologic characteristics affecting groundwater and contaminant movement along the apparent main plume migration pathway to the north-northwest of the former CCC/USDA facility, and in the vicinity of the Nigh property. (2) Identification of potential locations for several additional monitoring wells, to better constrain the apparent western and northwestern margins of the existing groundwater plume. (3) Development of technical recommendations for a stepwise pumping study of the Everest aquifer unit in the …

Fact sheet describing Clean Cities, a DOE program that deploys alternative and advanced fuels and vehicles to displace petroleum in the transportation sector. It also lists the contact information for its almost 90 coalition coordinators.

Little Pend Oreille National Wildlife Refuge is proposing to acquire a 706-acre property located in Stevens County, Washington. The new acquisition would be called the Kaniksu Unit. A habitat evaluation was conducted on the property using the Habitat Evaluation Procedures (HEP) methodology (U.S. Fish and Wildlife Service 1980). Evaluation species were black-capped chickadee, mallard, ruffed grouse and white-tailed deer. Life requisites evaluated were food and reproduction for black-capped chickadee, food, cover, and reproduction for mallard, available winter browse for white-tailed deer and fall-to-spring cover for ruffed grouse.

The Commodity Credit Corporation (CCC), an agency of the U.S. Department of Agriculture (USDA), formerly operated grain storage facilities at two different locations at Everest, Kansas (Figure 1.1). One facility (referred to in this report as the Everest facility) was at the western edge of the city. The second facility (referred to in this report as Everest East) was about 0.5 mi northeast of the town. The CCC/USDA operated these facilities from the early 1950s until the early 1970s, at a time when commercial fumigants containing carbon tetrachloride were in common use by the CCC/USDA and private industry for the preservation of grain in storage. In 1997 the Kansas Department of Health and Environment (KDHE) sampled several domestic drinking water and non-drinking water wells in the Everest area as part of the CCC/USDA Private Well Sampling Program. All of the sampled wells were outside the Everest city limits. Carbon tetrachloride contamination was identified at a single domestic drinking water well (the Nigh well, DW06; Figure 1.1) approximately 3/8 mi northwest of the former Everest CCC/USDA grain storage facility. Subsequent KDHE investigations suggested that the contamination in DW06 could be linked to the former use of grain fumigants at the CCC/USDA …