Degree Department
Degree Discipline
Degree Level
Country
Decade
390 Matching Results
Results open in a new window/tab.
Results:
1 - 24 of
390
next
Design and Development of a Paper Spray Air Sampling Device for Use in Clinical, Defense, and Environmental Applications
Environmental monitoring is becoming increasingly important, primarily in urban areas due to the concentrated levels of human activities. The air sampling device presented is a novel method to sample air which harnesses the power of paper spray ionization paired with the intrinsic advantages of mass spectrometry such as high sensitivity, high selectivity, high throughput, and the ability to monitor multiple compounds at once.
Date:
December 2023
Creator:
Murillo, Wilbert Alberto
System:
The UNT Digital Library
Magnetron Sputtering of Transition Metal Oxynitrides and Their Characterization with Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
Transition metal oxynitrides are of growing interest for their use as electrocatalyst for nitrogen reduction reaction. The metals in the oxynitride used for catalytic process are stabilized in intermediate state for effective activation of nitrogen. Therefore, studying the interaction of metal oxynitrides films to ambient exposure is necessary. Here, sputter deposited vanadium oxynitride is compared to cobalt oxynitride using insitu Auger electron spectroscopy (AES), ex situ X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscopy (SEM). After deposition in Ar/N2 environment, in situ AES spectra indicate that film is vanadium oxynitride despite oxygen is not the reactive gas. In contrast, in situ AES indicate film is pure cobalt nitride at the same base pressure and deposition condition (as vanadium). For ambient exposure, in situ AES indicate the incorporation of oxygen in the cobalt nitride film to form cobalt oxynitride. Ex situ XPS indicate both films get more oxidized but uniformly distributed as there is only slight difference in grazing and normal emission XPS. XRD and SEM also indicate how homogeneously distributed both films are. These finding confirms how important it is that transition metal centers are kept in intermediate oxidation state for the activation of nitrogen bond.
Date:
May 2023
Creator:
Adesope, Qasim Adewale
System:
The UNT Digital Library
An Investigation into the Micromechanical and Corrosion Properties of Additively Manufactured Stainless Steel 316L
In this thesis, micro-mechanical properties and corrosion resistance of laser powder bed fusion (L-PBF) processed additive manufactured (AM) 316L stainless steel parts were investigated for different combinations of processing parameters. Various laser powers were employed for the fabrication of all AM 316L stainless steel parts. Nanoindentation, areal roughness, and electron backscattered diffraction (EBSD) characterization were used to characterize the surface of the AM samples prior to corrosion testing. Open circuit potential (OCP), linear polarization resistance (LPR), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization tests were done to compare AM L-PBF 316L stainless steels with different processing parameters. Overall, it was observed that the AM part having a 56.67 J/mm3 volumetric energy density (VED) exhibits the best micro-mechanical characteristics. This sample also had the lowest areal surface roughness and smallest grain size. Consequently, this parameter combination had better corrosion resistance compared to the other AM processed 316L parts. The results are useful in process calibration when fabricating for corrosion resistance applications and provide insights into the relationship among nano-mechanical, crystallography, and long-term corrosion performance.
Date:
December 2022
Creator:
England, Jennifer
System:
The UNT Digital Library
Nanofluidic Membrane Based on Covalent Organic Framework: Design Strategies and Applications
Nanofluidic is an emerging field of applying fluid properties in nanochannels or nanostructures. The nanoporous channel with a pore size of less than 100 nm will strongly affect the motion of the fluid. Meanwhile, the pore environment, such as hydrophilic and hydrophobic properties, charge density, and host-guest recognition would be crucial for the transportation of molecules and ions in the pore. This thesis is focused on the synthesis, characterization of nanofluidic membranes and their applications to reverse electrodialysis. Chapter 1 focuses on the importance and objective of this work. Chapter 2 gives an overview of nanofluidic and classical nanofluidic structure–covalent organic frameworks (COFs). In Chapter 3, a series of COFs membranes with different surface charge densities were designed by employing a multivariate (MTV) strategy. A volcano-like relationship between the surface charge density and output power density was observed when the membranes were applied for osmotic energy harvesting. Chapter 4 integrates the temperature gradient to the covalent organic frameworks nanofluidic system to further explain the thermophoretic mobility of ions. The recorded osmotic energy production density was obtained while ion concentration polarization was alleviated with increasing hydrodynamic convection effects. In Chapter 5, a coupled photon-electron-ion transport behavior across ionic covalent organic framework …
Date:
December 2022
Creator:
Zhu, Changjia
System:
The UNT Digital Library
Novel LC-MS Method for the Analysis of Beta-Hydroxybutyric Acid (BHB) in Health Formulations
The rise of nutraceutical health formulations has increased the need for more stringent analytical testing methods. Complex matrices present a new problem when determining concentration of compounds of interest. The presented method uses LC-MS analysis with a novel sample preparation method in the determination of Beta-hydroxybutyric acid in health formulations. The use of an aqueous analytical column allows for separations of polar compounds after non-polar compounds are removed through C18 packed column filtration. The samples were analyzed through time-of-flight mass spectrometry and results show that this is an effective method for the presented samples with a range of expected concentrations of total BHB was from 11.80% to 38.92%. It was seen that all samples exhibited a less than 10% percent deviation from the expected concentrations of the nutraceutical health samples with the highest being 9.74 % for sample 9 and the lowest being sample 3 with a deviation of 0.08 % from expected values.
Date:
May 2022
Creator:
Smith, Garret Mackenzie
System:
The UNT Digital Library
Pressure Controlled Topochemical Polymerization in Two-Dimensional Hybrid Perovskite
Mechanical pressure offers unique control over the energy landscape of chemical reactions, opening up pathways that are inaccessible through conventional thermochemistry. We hypothesize that the reduced dimensionality defines the conformational space of the high-pressure reaction, giving rise to new selectivity that is unavailable in 3D systems. Here, we demonstrate this concept through the pressure-controlled topochemical polymerization of the diacetylene molecule deca‐3,5‐diyn‐1‐amine (DDA) incorporated in the two-dimensional (2D) perovskite [DDA]2PbBr4. Compression at 3 GPa drives the first topochemical polymerization through 1,2 addition, forming a polyene product at room temperature. The reaction is initiated by the mechanical bending of the linear DDA molecule, a mechanism fundamentally different from the 1,4-addition in 3D solids. Importantly, pressure hinders the second 1,2-addition by disfavoring the gauche conformation between the remaining acetylene groups, allowing for the selective formation of polyene versus polyacene products. We characterize the reaction mechanisms and products using spectroscopies (Raman, X-ray photoelectron, ultraviolet-visible), X-ray diffraction and density-functional theory simulations. These results highlight the important role of dimensionality in high-pressure chemistry, and offers a new paradigm for creating low-dimensional functional materials.
Date:
December 2021
Creator:
Abu-Amara, Lama Marwan
System:
The UNT Digital Library
A Combined Theoretical and Experimental Study on Deposition of Solid State Materials
Deposition of solid state materials span a wide variety of methods and often utilize high energy sources such as plasmas and ultra-violet light resulting in a wide variety of characteristics and applications. A fundamental understanding is essential for furthering the applications of these materials which include catalysis, molecular filtration, electronics, sensing devices, and energy storage among others. A combination of experimental and theoretical work is presented here on several materials including 2D silicates on Pd, boron oxide, and vanadium oxynitride. Silicate formation under low energy electron microscopy demonstrate film permeability to oxygen, while ab initio molecular dynamics simulations reveal the possible initial mechanisms associated with the formation of boron oxide films during atomic layer deposition. Lastly, vanadium oxynitrides have shown preferential sputtering of N over O sites and theoretical binding energies serve as a guide for assigning experimental x-ray photoelectron spectra.
Date:
August 2020
Creator:
Lee, Veronica
System:
The UNT Digital Library
Development of an Optical Carbon Dioxide Sensor and Modeling of Metal-Metal Interactions for Sensor Applications
An investigation of luminescent sensing has been presented. Neutral Red, a common pH luminescent sensor, was shown to be an effective carbon dioxide sensor for the first time. Sensing experiments were performed both through fluorometric and fluorescent microscopy studies, giving rise to the possibility of carbon dioxide sensing for biological applications. Neutral Red was benchmarked against the well-established carbon dioxide sensor Pyranine (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt), HPTS. Neutral Red was shown to have improved response times and higher consistency within the sensing drift compared to HPTS. Trinuclear Au(I) complexes have previously shown to sense metal ions through changes in their luminescent properties. A computational study on d10-d10 interactions, which exist in complexes where Cu+, Ag+, and Au+ are intercalated with [Au(μ-C2,N3-ethylImidazolate)]3 in the form of both half and full sandwich adducts. Binding energies, total density plots, and Morse and Dunham analyses of potential energy surfaces are employed to better understand the metal-metal interactions and the effects of electron correlation, basis set superposition error, and dispersion of metallophilic interactions of the adduct complexes. As metal-metal interactions within these types of complexes become better understood, the tuning of trinuclear Au(I) complexes for luminescent sensing of metals becomes increasingly possible.
Date:
December 2019
Creator:
Ericson, Megan
System:
The UNT Digital Library
Spectral, Electrochemical, and Solar Cell Studies of Peripheral Modified Carboxy Zinc Porphyrins
Six peripherally meso-modified Zn (II) porphyrin sensitizer dyes are designed and their J-V performance in dye sensitized solar cell (DSSC) evaluated. Electron-donating groups including phenothiazine, carbazole and pyrene are used to modify the porphyrin macrocycle at the meso-carbon position(s). To compare the effect of donor substitution on the performance of the cells in terms of short circuit current (Jsc), light harvesting efficiency (LHE) and power conversion efficiency (η), two sets of sensitizers with different degrees of substitution are synthesized. One set of dyes (mono-substituted) have one electron donor at trans-position to the acceptor, while the second set (tri-substituted) dyes have three of the same type electron donor groups at 5, 10 and 15 meso-carbon positions making all the six dyes push-pull type sensitizers incorporating 4'-carboxyphenyl as an electron-acceptor/anchor group. Different spectroscopic and electrochemical methods are used to study the photophysical and electrochemical properties of the dyes, while the photovoltaic performance of their cells under 1.5 A.M is studied using solar simulator. Meso-substitution of Zinc (II) porphyrin with these small donor molecules is shown to improve the light harvesting character of the Zinc (II) porphyrin macrocycle in the UV-Vis absorption while at same time improving its fluorescence quantum yield, excited-state life …
Date:
May 2019
Creator:
Alsaleh, Ajyal Zaki
System:
The UNT Digital Library
Synthesis and Characterization of Triphenylene-BODIPY Paddle Wheel Conjugates for Ultra-Fast Light Induced Charge Separation Yielding High-Energy Charge-Separated States
In the development of covalent organic frameworks (COFs), often the scaffold linkers are assumed to be electro- and photoinactive, and this was also to be the case for 2,3,6,7,10,11-hexahydroxytriphenylene, a tritopic linker. However, as demonstrated in the present study, the reaction product of this linker, hexaoxatriphenylene, is electron rich and when connected to a suitable photosensitizer engages itself in an efficient excited-state charge separation process. In the present study, we have employed BF2-chelated dipyrromethenes (BODIPYs) as sensitizers, which are connected to hexaoxatriphenylene through the center boron, rendering paddle-wheel-type structures. Systematic photophysical, electrochemical, computational, and photochemical studies involving pump-probe femtosecond transient spectroscopy have been performed to establish efficient charge separation in these novel supramolecular structures.
Date:
May 2019
Creator:
Cantu, Robert
System:
The UNT Digital Library
Synthesis and Studies of AzaBODIPY Derived Donor-Acceptor Systems for Light Induced Charge Separation
The efficiency and mechanism of electron- and energy transfer events occurring in both in natural and synthetic donor-acceptor systems depend on their distance, relative orientation, and the nature of the surrounding media. Fundamental knowledge gained from model studies is key in building efficient energy harvesting and optoelectronic devices. Faster charge separation and slower charge recombination in donor-acceptor systems is often sought out. In our continued effort to build donor-acceptor systems using near-IR sensitizers, in the present study, we report ground and excited state charge transfer in newly synthesized, directly linked, tetrads featuring bisdonor (donor = phenothiazine and ferrocene), BF2-chelated azadipyrromethane (azaBODIPY) and C60 entities. The tetrads synthesized using multi-step synthetic procedure revealed strong charge transfer interactions in the ground state involving the donor and azaBODIPY entities. The near-IR emitting azaBODIPY acted as a photosensitizing electron acceptor along with fullerene while the phenothiazine and ferrocene entities acted as electron donors. The triads (bisdonor-azaBODIPY) and tetrads revealed ultrafast photoinduced charge separation leading to D•+-azaBODIPY•–-C60 and D•+-azaBODIPY-C60•– (D = phenothiazine or ferrocene) charge separated states from the femtosecond transient absorption spectral studies in both polar and nonpolar solvent media. The charge separated states populated the triplet excited state of azaBODIPY prior returning to …
Date:
December 2018
Creator:
Collini, Melissa A.
System:
The UNT Digital Library
Detection of Harmful Chemicals in the Air using Portable Membrane Inlet Mass Spectrometry
Portable mass spectrometry has become an important analytical tool for chemical detection and identification outside of a lab setting. Many variations and applications have been developed to benefit various fields of science. Membrane inlet mass spectrometry is used to allow certain analytes to pass into the mass spectrometer without breaking vacuum or letting in large particulate matter. These two important analytical tools have been applied to the detection of harmful chemicals in the air. Earth-based separations and reverse gas stack modelling are useful mathematical tools that can be used to locate the source of a chemical release by back calculation. Earth-based separations studies the way different molecules will diffuse and separate through the air. Reverse gas stack modelling refers to the concentration differences of a chemical in relation to its distance from its source. These four analytical techniques can be combined to quickly and accurately locate various harmful chemical releases. The same system can be used for many applications and has been tested to detect harmful chemicals within and air-handling system. The monitoring of air-handling systems can greatly reduce the threat of harm to the building occupants by detecting hazardous chemicals and shutting off the air flow to minimize human …
Date:
August 2018
Creator:
Kretsch, Amanda Renee
System:
The UNT Digital Library
Kinetic Study of the Reactions of Chlorine Atoms with Fluoromethane and Fluoromethane-d3 in the Gas Phase
The kinetics of the gas-phase reactions of chlorine atoms with fluoromethane (CH3F) and fluoromethane-d3(CD3F) were tested experimentally. The relative rate method was applied by using CH4 as the reference compound for fluoromethane (CH3F) and CH4 and CH3F as the reference compound for fluoromethane-d3(CD3F). The rate constants for H-abstraction from CH3F and D-abstraction from CD3F were measured at room temperature and a total pressure of 920 Torr using Ar as a diluent. The rate constants are described by the expressions: kH= (3.50±0.52) x 10-13 cm3 molecule-1 s-1 and kD=(5.0±0.51) x 10-14 cm3 molecule-1 s-1. The kinetic isotope effect, equal to the ratio kH/kD, was found to be 7.0±1.2 at room temperature.
Date:
August 2017
Creator:
Shao, Kejun
System:
The UNT Digital Library
Application of UV-Vis Spectroscopy to the Monitoring, Characterization and Analysis of Chemical Equilibria of Copper Etching Baths
The continuously increasing demand for innovation in the miniaturization of microelectronics has driven the need for ever more precise fabrication strategies for device packaging, especially for printed circuit boards (PCBs). Subtractive copper etching is a fundamental step in the fabrication process, requiring very precise control of etch rate and etch factor. Changes in the etching chemical equilibrium have significant effects on etching behavior, and CuCl2 / HCl etching baths are typically monitored with several parameters including oxidation-reduction potential, conductivity, and specific gravity. However, the etch rate and etch factor can be difficult to control even under strict engineering controls of those monitoring parameters. The mechanism of acidic cupric chloride etching, regeneration and recovery is complex, and the current monitoring strategies can have difficulty controlling the interlocking chemical equilibria. A complimentary tool, thin-film UV-Vis spectroscopy, can be utilized to improve the current monitoring strategies, as UV-Vis is capable of identifying and predicting etching behavior that the current standard methodologies have difficulty predicting. Furthermore, as a chemically-sensitive probe, UV-Vis can investigate the complex changes to the chemical equilibrium and speciation of the etch bath, and can contribute overall to significant improvements in the control of the copper etching system in order to …
Date:
August 2017
Creator:
Lambert, Alexander S.
System:
The UNT Digital Library
Synthesis and Application of New Chiral Ligands for Enantioselectivity Tuning in Transition Metal Catalysis
A set of five new C3-symmetric phosphites were synthesized and tested in palladium-catalyzed asymmetric Suzuki coupling. The observed reactivity and selectivity were dependent upon several factors. One of the phosphites was able to achieve some of the highest levels of enantioselectivity in asymmetric Suzuki couplings with specific substrates. Different hypotheses have been made for understanding the ligand effects and reaction selectivities, and those hypotheses were tested via various methods including DOSY NMR experiments, X-ray crystallography, and correlation of catalyst selectivity with Tolman cone angles. Although only modest enantioselectivities were observed in most reactions, the ability to synthesis these phosphites in only three steps on gram scales and to readily tune their properties by simple modification of the binaphthyl 2´-substituents makes them promising candidates for determining structure-selectivity relationships in asymmetric transition metal catalysis, in which phosphites have been previously shown to be successful. A series of novel chiral oxazoline-based carbodicarbene ligands was targeted for synthesis. Unfortunately, the chosen synthetic route could not be completed due to unwanted reactivity of the oxazoline ring. However, a new and efficient route for Pd-catalyzed direct amination of aryl halides with oxazoline amine was developed and optimized during these studies. Chiral binaphthyl based Pd(II) ADC complexes …
Date:
August 2017
Creator:
Kong, Fanji
System:
The UNT Digital Library
Electrochemical Deposition of Nickel Nanocomposites in Acidic Solution for Increased Corrosion Resistance
The optimal conditions for deposition of nickel coating and Ni-layered double hydroxide metal matrix composite coatings onto stainless steel discs in a modified all-sulfate solutions have been examined. Nickel films provide good general corrosion resistance and mechanical properties as a protective layer on many metallic substrates. In recent years, there has been interest in incorporation nano-dimensional ceramic materials, such as montemorillonite, into the metal matrices to improve upon the corrosion and mechanical properties. Layered double hydroxides have been used as corrosion enhancer in polymer coatings by increasing mechanical strength and lowering the corrosion rate but until now, have not been incorporated in a metal matrix by any means. Layered double hydroxides can be easily synthesized in a variety of elemental compositions and sizes but typically require the use of non-polar solvents to delaminate into nanodimensional colloidal suspensions. The synthesis of a Zn-Al LDH has been studied and characterized. The effects of the non-polar solvents dimethylformamide and n-butanol on the deposition and corrosion resistance of nickel coatings from a borate electrolyte bath have been studied, a nickel-LDH nanocomposite coating has been synthesized by electrochemical deposition and the corrosion resistance has been studied. Results indicate an improvement in corrosion resistance for the …
Date:
August 2017
Creator:
Daugherty, Ryan E.
System:
The UNT Digital Library
Characterization of Aprotic Solutes and Solvents Using Abraham Model Correlations
Experimental data were obtained for the computation of mole fraction solubilities of three dichloronitrobenzenes in organic solvents at 25oC, and solubility ratios were obtained from this data. Abraham model equations were developed for solutes in tributyl phosphate that describe experimental values to within 0.15 log units, and correlations were made to describe solute partitioning in systems that contain either "wet" or "dry" tributyl phosphate. Abraham model correlations have also been developed for solute transfer into anhydrous diisopropyl ether, and these correlations fit in well with those for other ethers. Abraham correlations for the solvation of enthalpy have been derived from experimental and literature data for mesitylene, p-xylene, chlorobenzene, and 1,2-dichlorobenzene at 298.15 K. In addition, the enthalpy contribution of hydrogen bonding between these solutes and acidic solvents were predicted by these correlations and were in agreement with an established method. Residual plots corresponding to Abraham models developed in all of these studies were analyzed for trends in error between experimental and calculated values.
Date:
December 2016
Creator:
Brumfield, Michéla L.
System:
The UNT Digital Library
Kinetic Study of the Reactions of Oxygen Atoms with Nitric Oxide and Silane
The rate constant for the reactions of oxygen atoms with nitric oxide and silane were determined using a discharge flow apparatus. A microwave discharge through O2N2 and Ar was used to produce oxygen atoms. The rate constant for the reaction O + NO + Ar was determined to be (7.0+0.4) x 10^32 cm^6 s^-1 and is in good agreement with previous measurements. Modeling of the O +SiH₄ reaction was performed to determine the correction to the rate constant due to secondary reactions. The rate constant for the reaction O + SiH₄ was determined to be (3.3 +/- 0.3) x 10⁻¹³ cm³ s⁻¹ and is in good agreement with previous measurements. Previous literature, thermochemistry, and spin conservation were used to determine a probable mechanism for the O + SiH₄ reaction.
Date:
August 1992
Creator:
Taylor, Craig A. (Craig Allan)
System:
The UNT Digital Library
Carbon-13-carbon-13 Coupling Constants in Fluorene and O-Methylbenzene Derivatives
A model system to calculate single-path coupling constant was devised to see if the couplings are additive in a system which has a dual-pathway. The system chosen was o-methyl-13C-benzoic acid. Because of anomalies in the data, the series was extended. Hybridization of the label appeared to have relatively little effect, and the conformation of the substituents very important.
Date:
August 1977
Creator:
Kattner, Richard M.
System:
The UNT Digital Library
Theoretical Analysis of Drug Analogues and VOC Pollutants
While computational chemistry methods have a wide range of applications within the set of traditional physical sciences, very little is being done in terms of expanding their usage into other areas of science where these methods can help clarify research questions. One such promising field is Forensic Science, where detailed, rapidly acquired sets of chemical data can help in decision-making at a crime scene. As part of an effort to create a database that fits these characteristics, the present work makes use of computational chemistry methods to increase the information readily available for the rapid identification and scheduling of drugs to the forensic scientist. Ab initio geometry optimizations, vibrational spectra calculations and ESI-MS fragmentation prediction of a group of common psychedelics are here presented. In addition, we describe an under development graphical user interface to perform ab initio calculations using the GAMESS software package in a more accessible manner. Results show that the set of theoretical techniques here utilized, closely approximate experimental data. Another aspect covered in this work is the implementation of a boiling point estimation method based on group contributions to generate chemical dispersion areas with the ALOHA software package. Once again, theoretical results showed to be in …
Date:
August 2016
Creator:
Garibay, Luis K.
System:
The UNT Digital Library
Analysis of Trace Amounts of Adulterants Found in Powders/Supplements Utilizing Direct Inject, Nanomanipulation, and Mass Spectrometry
The regulations of many food products in the United States have been made and followed very well but unfortunately some products are not put under such rigorous standards as others. This leads to products being sold, that are thought to be healthy, but in reality contain unknown ingredients that may be hazardous to the consumers. With the use of several instrumentations and techniques the detection, characterization and identification of these unknown contaminates can be determined. Both the AZ-100 and the TE2000 inverted microscope were used for visual characterizations, image collection and to help guide the extraction. Direct analyte-probed nanoextraction (DAPNe) technique and nanospray ionization mass spectrometry (NSI-MS) was the technique used for examination and identification of all adulterants. A Raman imaging technique was than introduced and has proven to be a rapid, non-destructive and distinctive way to localize a specific adulterant. By compiling these techniques then applying them to the FDA supplied test samples three major adulterants were detected and identified.
Date:
August 2016
Creator:
Nnaji, Chinyere
System:
The UNT Digital Library
Synthesis, Characterization and Catalytic Studies of Chiral Gold Acyclic Diaminocarbene Complexes
Chiral gold complexes have been applied in homogeneous catalytic reactions since 1986, in some cases with high enantioselectivity. Acyclic diaminocarbene (ADC) ligands are acyclic analogues of N-heterocyclic carbenes (NHCs) that have larger N-CCarbene-N angles and stronger donating ability. ADCs have been developed as alternatives to phosphine and NHC ligands in homogeneous gold catalysis. In 2012, a new series of chiral gold(I) ADCs were first developed by Slaughter's group and were shown to give remarkable enantioselectivities in some reactions. Because of the hindered rotation of the N-CCarbene bonds of ADC, chiral ADC substituents can easily get close to the metal center in some conformations, although two rotameric structures are formed if the chiral amine is nonsymmetric. The selective of specific ADC conformations was the initial focus of this study. Formational selectivity of one diastereomer of an ADC ligand during synthesis was examines by measuring the relative rates of diastereomer formation in a 1H NMR kinetic study. The potential for converting multiple conformational isomers of ADCs into a single conformation, or at least a simpler mixture, was examined. This study used the analogy that anti- isomer has electronic and structural similarity with urea/thiourea, raising the possibility that 1,8-naphthyridine can be used to …
Date:
August 2016
Creator:
Zhang, Xiaofan
System:
The UNT Digital Library
Synthesis and Electron Transfer Studies of Supramolecular Triads
This study expands the role of polythiophenes as an electron donating chromophore within energy harvesting milti-modular donor-acceptor systems. The polythiophene moiety would act as an electron donating spacer group between the donor and acceptor entities, viz., phenothiazine and fulleropyrrolidine, respectively, in the newly synthesized supramolecular triads. The triads 10-{[2,2';5',2"] terthiophene-5-fulleropyrrolidine} phenothiazine and 10-{[2,2'] bithiophene-5-fulleropyrrolidine} phenothiazine were synthesized and characterized through electrochemical and spectroscopic methods to ascertain their structural integrity. the componets of the triads were selected for their established redox parameters. Phenothiazine would act as a secondary donor and would facilitate hole-transfer from the polythiophene primary electron donor, due to its ease of oxidation and yield a long-lived charge separated state. Fulleropyrrolidine would act as an acceptor for ease of reductive capabilities and its ability to hold multiple charges. Finally, occurrence of photoinduced electron transferleading to the anticipated charge separated states is established from advanced transient spectroscopic techniques on these novel supramolecular systems.
Date:
May 2016
Creator:
Bodenstedt, Kurt
System:
The UNT Digital Library
Laser Ablation Inductively Coupled Plasma Mass Spectrometry and Raman Spectroscopy Imaging of Biological Tissues
Laser Ablation Inductively coupled plasma mass spectrometry (LA-ICP-MS) and Raman spectroscopy are both powerful imaging techniques. Their applications are numerous and extremely potential in the field of biology. In order to improve upon LA-ICP-MS an in-house built cold cell was developed and its effectiveness studied by imaging Brassica napus seeds. To further apply LA-ICP-MS and Raman imaging to the field of entomology a prong gilled mayfly (Ephemeroptera: Leptophlebiidae) from the Róbalo River, located on Navarino Island in Chile, was studied. Analysis of both samples showcased LA-ICP-MS and Raman spectroscopy as effective instruments for imaging trace elements and larger molecules in biological samples respectively.
Date:
May 2016
Creator:
Gorishek, Emma Lee
System:
The UNT Digital Library