Article describes an energy-based analysis on the formation and growth of condensate droplets on two-tier superhydrophobic surfaces, which are fabricated by decorating carbon nanotubes (CNTs) onto microscale fluorinated pillars.

Article assesses the capabilities of computational fluid dynamics (CFD), potential flow (PF), and system-based (SB) methods for course keeping in calm water and regular and bi-chromatic waves for 5415M as a benchmark test case for AVT-161.

Article describes study where a powder of torreya grandis bark was prepared and analyzed qualitatively and quantitativelyiIn order to explore a new way to utilize said bark.

This article aims to give a summary of the state of the art of non-enzymatic electrochemical sensors used for detection of neurotransmitter that lack an electrochemically active component.

This article proposes a novel methodology by impregnating SiO₂ precursor solution into the heat-treated wood to improve the mechanical properties.

Article investigating the mechanism for etching of exfoliated graphene multilayers on SiO₂ by low-energy (50 eV) electron irradiation using He plasma systems for electron sources.

This article describes a study to improve the electrical and thermal conductivity of the polylactic acid/wood flour/thermoplastic polyurethane composites by Fused Deposition Modeling (FDM). The results showed that, when the addition amount of nano-graphite reached 25 pbw, the volume resistivity of the composites decreased to 10⁸ Ω·m, which was a significant reduction, indicating that the conductive network was already formed. It also had good thermal conductivity, mechanical properties, and thermal stability.

This article explores self-bonded natural fiber material (SNFM) as a promising alternative for plastic and wood owing to its abundant raw material resources and low environmental impact. In this study, a high-performance SNFM was developed by the comprehensive treatments for the plasticity and structure of fiber cell walls. The self-bonded mechanism for natural fiber materials was also discussed. The SNFM products showed excellent mechanical performance, which was superior to that of natural wood and plastic.

This article looks at the tensile properties and dynamic mechanical properties of bamboo powder (BP) reinforced polylactic acid (PLA) composite filaments which were treated with nano calcium carbonate (CaCO3), cellulose nanofibers (CNF), and micro-crystalline cellulose (MCC) using impregnation modification technology.

This article focuses on a way to maximize the concentration acceptance product (CAP), while using the minimum SOE and receiver geometry at a given f-number and incidence angle (also referred to as the tracking error angle). The laws of polychromatic light refraction along with trigonometry and spherical geometry were utilized to optimize the POE grooves, SOE radius, receiver size, and SOE–receiver spacing.

Article investigates a novel genetically themed hierarchical algorithm (GTHA) to design Fresnel lens solar concentrators that match with the distinct energy input and spatial geometry of various thermal applications.

Article using preferential solubility of a polymer in supercritical CO2 to develop a new architecture using biocompatible polymers based on porous core-sheath fiber fabrication technique.

This article highlights the development of a flexible long-chain starch with a hyper-branched structure (HD), and incorporating it with SM and a crosslinking agent to prepare a novel SM adhesive. Results showed that this adhesive exhibited both excellent water resistance and enhanced toughness. The wet bond strength of plywood fabricated using this adhesive was 354.5% higher than that of SM adhesive.

Describes a study where researchers constructed a bio-hygromorph using fish swim bladder hydrogel as the hydrophilic material and wood flour-filled polylactic acid (WPLA) scaffold, which was printed with fused deposition modeling (FDM) 3D printing technology (3DP).

This article highlights a study aimed at improving the conductivity of polylactic acid (PLA)-based composites by incorporating carbonaceous fillers. The composites with the addition of graphene nanoplatelets (rGO) or multi-walled carbon nanotubes (MWCNTs) were fabricated by the masterbatch melting method in order to improve the dispersion of the two kinds of nano-fillers. The results showed that, with the addition of 9 wt % rGO, the volume electrical resistivity of the composite reached the minimum electrical resistance of 10³ Ω·m, at which point the conductive network in the composites was completely formed.

In this article the density uniformity and mechanical properties of bamboo bundle veneers were systematically evaluated by the combination of light transmittance and mechanical stiffness. It was found that the number of broomings, dippings, and high-temperature heat treatments had different effects on the bamboo bundle veneers. On this basis, the uniformity of the density and mechanical properties of the bamboo scrimber (BS) that underwent hybrid paving, and the bamboo bundle laminated veneer lumber (BLVL), were analyzed.

Describes study in developing an environmentally benign styrene foam using supercritical CO2.

Proposes a fabrication method for making a lightweight, anisotropic, and compressible wood aerogel with aligned cellulose fibers by a simple chemical treatment.

Article describes study analyzing the chemical components of elliptical kiwifruit (Actinidia chinensis Planch) using Fourier transform infrared spectroscopy (FT-IR) and gas chromatography mass spectrometry (GC–MS) technologies.

Article describes examination of the appearance, color, chemical composition, and physiology and mechanical properties of densified Abies wood before and after densification treatment using a colorimeter, FTIR and mechanical testing machine.

This article highlights a study of a bio adhesive was developed from soybean meal and larch tannin that was designed for exterior use. Phenol hydroxymethylated tannin oligomer (PHTO) was synthesized and then mixed with soybean meal flour in order to obtain a soybean meal-based adhesive (SPA). The results showed that the moisture absorption rate, residual rate, and solid content of SPA with 10 wt % PHTO (mass ratio with respect to the entire adhesive) were improved by 22.8%, 11.6%, and 6.8%, respectively, as compared with that of pure SPA.

Describes the development of a strong mold-resistant adhesive by incorporating soybean meal and blood meal.

Article demonstrating the dynamic potential for tailoring the surface plasmon resonance (SPR), size, and shapes of gold nanoparticles (AuNPs) starting from an Au(I) precursor, chloro(dimethyl sulfide)gold (I) (Au(Me2S)Cl), in lieu of the conventional Au(III) precursor hydrogen tetrachloroaurate (III) hydrate (HAuCl4). This approach presents a one-step method that permits regulation of an Au(I) precursor to form either visible-absorbing gold nanospheres or near-infrared-window (NIRW)-absorbing anisotropic AuNPs.

Article describes study analyzing the characteristics of the movement of the gel extinguishing agent micelles by considering the resistance of movement.